首頁 電源管理 AC/DC 和 DC/DC 轉換器 (整合式 FET)

TPS57160-Q1

現行

Eco-Mode™ 車用 3.5V 至 60V、1.5A 降壓轉換器

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的裝置不同
最新 LM65625-Q1 現行 針對功率密度和低 EMI 最佳化的車用 2.5V、3V 至 65V 降壓轉換器 Better efficiency and smaller solution size

產品詳細資料

Rating Automotive Topology Buck Iout (max) (A) 1.5 Vin (max) (V) 60 Vin (min) (V) 3.5 Vout (max) (V) 58 Vout (min) (V) 0.8 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Soft Start Adjustable, Tracking, UVLO adjustable Control mode current mode Switching frequency (min) (kHz) 100 Switching frequency (max) (kHz) 2500 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 116 Duty cycle (max) (%) 100 Type Converter
Rating Automotive Topology Buck Iout (max) (A) 1.5 Vin (max) (V) 60 Vin (min) (V) 3.5 Vout (max) (V) 58 Vout (min) (V) 0.8 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Soft Start Adjustable, Tracking, UVLO adjustable Control mode current mode Switching frequency (min) (kHz) 100 Switching frequency (max) (kHz) 2500 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 116 Duty cycle (max) (%) 100 Type Converter
HVSSOP (DGQ) 10 14.7 mm² 3 x 4.9 VSON (DRC) 10 9 mm² 3 x 3
  • Qualified for Automotive Applications
  • 3.5-V to 60-V Input Voltage Range
  • 200-mΩ High-Side MOSFET
  • High Efficiency at Light Loads With Pulse-
    Skipping Eco-mode™ Control Scheme
  • 116-µA Operating Quiescent Current
  • 1.5-µA Shutdown Current
  • 100-kHz to 2.5-MHz Switching Frequency
  • Synchronizes to External Clock
  • Adjustable Slow Start/Sequencing
  • Undervoltage and Overvoltage Power-good Output
  • Adjustable Undervoltage Lockout (UVLO) Voltage
    and Hysteresis
  • 0.8-V Internal Voltage Reference
  • Supported by SwitcherPro™ Software Tool
    (ti.com/tool/switcherpro)
  • Z-Suffix Offers Improved Delamination
  • Qualified for Automotive Applications
  • 3.5-V to 60-V Input Voltage Range
  • 200-mΩ High-Side MOSFET
  • High Efficiency at Light Loads With Pulse-
    Skipping Eco-mode™ Control Scheme
  • 116-µA Operating Quiescent Current
  • 1.5-µA Shutdown Current
  • 100-kHz to 2.5-MHz Switching Frequency
  • Synchronizes to External Clock
  • Adjustable Slow Start/Sequencing
  • Undervoltage and Overvoltage Power-good Output
  • Adjustable Undervoltage Lockout (UVLO) Voltage
    and Hysteresis
  • 0.8-V Internal Voltage Reference
  • Supported by SwitcherPro™ Software Tool
    (ti.com/tool/switcherpro)
  • Z-Suffix Offers Improved Delamination

The TPS57160-Q1 device is a 60-V 1.5-A step-down regulator with an integrated high-side MOSFET. Current-mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skip mode reduces the no load, input supply current to 116 µA. Using the enable pin, shutdown supply current is reduced to 1.5 µA.

Undervoltage lockout is set internally at 2.5 V but can be increased using the enable pin. The output voltage startup ramp is controlled by the slow-start pin that can also be configured for sequencing or tracking. An open-drain power-good signal indicates the output is within 92% to 109% of the nominal voltage.

A wide switching frequency range allows efficiency and external component size to be optimized. Frequency foldback and thermal shutdown protects the part during an overload condition.

The TPS57160-Q1 device is available in a 10-pin thermally enhanced MSOP-PowerPAD™ (DGQ) or 10-pin VSON (DRC) package. The Z-suffix offers reduced delamination compared to standard device.

The TPS57160-Q1 device is a 60-V 1.5-A step-down regulator with an integrated high-side MOSFET. Current-mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skip mode reduces the no load, input supply current to 116 µA. Using the enable pin, shutdown supply current is reduced to 1.5 µA.

Undervoltage lockout is set internally at 2.5 V but can be increased using the enable pin. The output voltage startup ramp is controlled by the slow-start pin that can also be configured for sequencing or tracking. An open-drain power-good signal indicates the output is within 92% to 109% of the nominal voltage.

A wide switching frequency range allows efficiency and external component size to be optimized. Frequency foldback and thermal shutdown protects the part during an overload condition.

The TPS57160-Q1 device is available in a 10-pin thermally enhanced MSOP-PowerPAD™ (DGQ) or 10-pin VSON (DRC) package. The Z-suffix offers reduced delamination compared to standard device.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 6
類型 標題 日期
* Data sheet TPS57160-Q1 1.5-A 60-V Step-Down DC-DC Converter With Eco-mode™ Control datasheet (Rev. E) PDF | HTML 2015年 3月 19日
Application note Passing CISPR25 Radiated Emissions Using the TPS54160-Q1 (Rev. A) 2019年 5月 23日
Application note Interfacing TPS57xxx-Q1 and TPS65320-Q1 Family Devices With Low Impendence Exter 2015年 12月 8日
Application note TPS54xxx-Q1 and TPS57xxx-Q1 Devices EMC Performance Comparison Study 2015年 11月 17日
Application note TPS54xx0-Q1 and TPS57xx0-Q1 Pin Open and Short Test Results (Rev. B) 2015年 11月 3日
Application note Design Considerations for DC-DC Converters in Fast-Input Slew Rate Applications 2015年 3月 5日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS57160-Q1EVM — TPS57160-Q1EVM: 採用 TPS57160-Q1 降壓 DC/DC 轉換器的 EMC 最佳化 EVM

The TPS57160-Q1EVM is optimized to meet the CISPR25 EMC Standard for automotive components. It requires an input voltage between 9V and 16V and will provide an output voltage of 5V at 1A. The layout has been designed to reduce emissions to levels deemed acceptable by the aforementioned standard. (...)

使用指南: PDF
TI.com 無法提供
開發板

TPS92662AEVM6-104 — TPS92662A-Q1 六通道矩陣評估模組

TPS92662AEVM6-104 包含 66 個獨立控制的 LED,配置爲六通道應用程式。此評估模組顯示 TPS92662A-Q1 LED 矩陣管理裝置的多功能性和可配置性。使用搭配的控制 PCB、6CHAUTOECU-899 和 TPS92662AEVM 軟體套件,可評估完整控制的動態前方照明系統。
模擬型號

TPS57160-Q1 PSpice Transient Model

SLVM817.ZIP (86 KB) - PSpice Model
模擬型號

TPS57160-Q1 Unencrypted PSpice Transient Model

SLVMCV2.ZIP (7 KB) - PSpice Model
計算工具

TPS54-57XX0-CALC TPS54xx0-Q1 and TPS57xx0-Q1 Design Calculation Tool

This worksheet is designed for use with Microsoft Excel 2002 or later. It intends to assist circuit designers in their day-to-day calculations

This worksheet includes two sections:

  • Recommendations: Calculates the maximum requirements for different components to guarantee the input voltage, output (...)
支援產品和硬體

支援產品和硬體

產品
AC/DC 和 DC/DC 轉換器 (整合式 FET)
  • TPS54240-Q1 Eco-Mode™ 車用 3.5V 至 42V、2.5A 降壓轉換器
  • TPS54260-Q1 具 Eco-Mode™ 的車用 3.5V 轉 60V、2.5A 降壓轉換器
  • TPS57040-Q1 Eco-Mode™ 車用 3.5V 至 42V、500mA 降壓轉換器
  • TPS57060-Q1 Eco-Mode™ 車用 3.5V 至 60V、500mA 降壓轉換器
  • TPS57140-EP 具有 Eco-mode™ 控制的 TPS57140-EP 1.5A 42V 降壓 DC-DC 轉換器
  • TPS57140-Q1 Eco-Mode™ 車用 3.5V 至 42V、1.5A 降壓轉換器
  • TPS57160-Q1 Eco-Mode™ 車用 3.5V 至 60V、1.5A 降壓轉換器
參考設計

PMP30942 — 適用於光達的車用 5-W 反相降壓升壓參考設計

這款微型反相降壓升壓可在 5.2 V 的輸入電壓中為光達應用提供高達 -45 V 的負電壓。最大負載電流限制為 120 mA。針對較大負載,使用 TPS54260 或 TPS54360。這些降壓裝置適合高工作週期範圍,可在 5-V 輸入下輕鬆啟動。
Test report: PDF
參考設計

TIDA-050040 — 適用於鹵素替換參考設計的車用 LED 車頭燈驅動器模組

此參考設計展示 TPS92682 和 TPS92520 在頭燈應用中做為全功能三通道 LED 驅動器的情況。  此設計旨在成為與汽車車身控制模組相容的低成本鹵素頭燈模組的替代方案。  三個 LED 通道驅動遠光燈/近光燈、轉向指示燈和日間行車燈以及位置標誌燈。  此設計採用一個 TPS92682 雙通道控制器,做為定電壓升壓和定電流 SEPIC。  此外還使用由升壓供應的一個 TPS92520,以供兩個同步整流定電流降壓轉換器使用。該電路板採用接地插座設計,以包含符合 EMI 規範的功率級,其中包括 CISPR 25 Class 5 傳導式測試結果。
Design guide: PDF
電路圖: PDF
參考設計

TIDA-050030 — 120W 雙級矩陣相容汽車頭燈 ECU 參考設計

此參考設計詳細說明車頭燈 ECU 使用交錯升壓電壓調節模式來驅動四個同步降壓通道。此設計也能進行矩陣式頭燈控制,並安裝在散熱器和機殼上以模擬車頭燈 ECU。TPS92682-Q1 設定為雙相交錯升壓控制器,並設定在電壓調節模式,能夠提供 130W 的輸出功率。升壓輸出可驅動兩個 TPS92520-Q1 雙通道同步降壓驅動器,總共可在 120W 總輸出下驅動四個降壓通道。此設計安裝在散熱器上並加以封裝,以模擬車頭燈 ECU。MSP432 處理器透過 SPI 介面控制 TPS92682-Q1 和兩部 TPS92520-Q1 裝置。MSP432 會透過 CAN 與主要裝置通訊,也會透過 CAN (...)
Design guide: PDF
電路圖: PDF
參考設計

PMP30473 — 最低雜訊輔助雙輸出電源供應參考設計

此參考設計為 2 x 1-W 反相降壓升壓轉換器。兩個輸出電壓(+5V 和 -5V)由單一降壓矽 (TPS57160-Q1) 產生。後置穩壓器(和後置濾波器)可確保無漣波輸出電壓。輸入電壓範圍涵蓋汽車與工業應用。 
Test report: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HVSSOP (DGQ) 10 Ultra Librarian
VSON (DRC) 10 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片