現在提供此產品的更新版本
功能相同，但針腳輸出與所比較的裝置不同。
TPS57140-Q1
- Qualified for Automotive Applications
- AEC-Q100 Qualified with the Following Results:
- Device Temperature Grade 1: –40°C to +125°C
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C4B
- 3.5-V to 42-V Input Voltage Range
- 200-mΩ High-Side MOSFET
- High Efficiency at Light Loads With Pulse-Skipping Eco-mode Control Scheme
- 116-μA Operating Quiescent Current
- 1.5-μA Shutdown Current
- 100-kHz to 2.5-MHz Switching Frequency
- Synchronizes to External Clock
- Adjustable Slow Start and Sequencing
- Undervoltage and Overvoltage Power-Good Output
- Adjustable Undervoltage Lockout Voltage and Hysteresis
- 0.8-V Internal Voltage Reference
- Supported by SwitcherPro Software Tool
(www.ti.com/tool/switcherpro)
All trademarks are the property of their respective owners.
The TPS57140-Q1 device is a 42-V, 1.5-A step-down regulator with an integrated high-side MOSFET. Current-mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skip mode reduces the no-load, regulated output supply current to 116 μA. When the enable pin is in the low state, the shutdown current is reduced to 1.5 µA.
Undervoltage lockout is internally set at 2.5 V, but can be increased using the enable pin. The output voltage startup ramp is controlled by the slow-start pin that can also be configured for sequencing or tracking. An open-drain power-good signal indicates the output is within 92% to 109% of its nominal voltage.
A wide switching-frequency range allows optimization of efficiency and external component size. Frequency foldback and thermal shutdown protect the part during an overload condition.
The TPS57140-Q1 is available in a 10-pin thermally enhanced MSOP-PowerPAD package (DGQ) and a 10-pin VSON package (DRC).
For all available packages, see the orderable addendum at the end of the data sheet.技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TPS57140-Q1 1.5-A 42-V Step-Down DC-DC Converter With Eco-mode™ Control datasheet (Rev. D) | PDF | HTML | 2016/2/5 | ||
| 選擇指南 | Automotive Infotainment EE Buck Converter/Controller Selection Guide (Rev. B) | 2021/4/15 | ||||
| 應用說明 | Passing CISPR25 Radiated Emissions Using the TPS54160-Q1 (Rev. A) | 2019/5/23 | ||||
| 應用說明 | Interfacing TPS57xxx-Q1 and TPS65320-Q1 Family Devices With Low Impendence Exter | 2015/12/8 | ||||
| 應用說明 | TPS54xxx-Q1 and TPS57xxx-Q1 Devices EMC Performance Comparison Study | 2015/11/17 | ||||
| 應用說明 | TPS54xx0-Q1 and TPS57xx0-Q1 Pin Open and Short Test Results (Rev. B) | 2015/11/3 | ||||
| 應用說明 | Design Considerations for DC-DC Converters in Fast-Input Slew Rate Applications | 2015/3/5 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS57140-Q1 Unencrypted PSpice Transient Model Package (Rev. A)
TPS54-57XX0-CALC — TPS54xx0-Q1 and TPS57xx0-Q1 Design Calculation Tool
This worksheet is designed for use with Microsoft Excel 2002 or later. It intends to assist circuit designers in their day-to-day calculations
This worksheet includes two sections:
- Recommendations: Calculates the maximum requirements for different components to guarantee the input voltage, output (...)
PMP11136 — 車用無線電 USB 電源埠 (5V@2.1A) 和 LED 背光驅動器參考設計
TIDA-00794 — 適用於 HEV/EV 牽引逆變器的 IGBT 模組過熱保護參考設計
TIDA-00794 參考設計是一款溫度感測解決方案，可在 HEV/EV 牽引逆變器系統中提供 IGBT 過熱保護。此解決方案會透過整合至 IGBT 模組中的 NTC 熱敏電阻監控 IGBT 溫度。當 NTC 熱敏電阻溫度上升超過設定的閾值時，也會為 IGBT 閘極驅動器提供熱關機。此設計包括 IGBT 隔離式閘極驅動器、高電壓隔離、NTC 訊號調整、負載電阻器，以及 MSP430 的 I2C 介面，讓設計系統能在高功率額定值下獨立運作。
TIDA-01429 — 採用 CAN 的車用離散式 SBC 預升壓、後降壓參考設計
在 TIDA-01429 參考設計中，首先採用一組寬輸入電壓的升壓控制器，接著搭配設定為 5.0V 的寬輸入電壓降壓轉換器。這個 5.0V 電源用於驅動控制器區域網路 (CAN) 收發器，並供電給固定輸出 3.3V 的線性壓差 (LDO) 穩壓器，以供 C2000 微控制器使用。本設計已依內襯吸波材料屏蔽圍體 (ALSE) 方法測試 CISPR 25 輻射排放，並以電壓法檢測傳導排放，也通過 ISO 11452-4 的大電流注入法 (BCI) 抗擾測試，所有測試皆在 500KBPS CAN 通訊下進行。這是一個具備控制器區域網路 (CAN) 參考設計、通過電磁相容性 (EMC) (...)
TIDA-080004 — 適用於擴增實境抬頭顯示的電子與 LED 驅動器參考設計
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| HVSSOP (DGQ) | 10 | Ultra Librarian |
| VSON (DRC) | 10 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。