首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器

TPS548A23

現行

4V 至 16V、12A 同步降壓轉換器

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 12 Vin (max) (V) 16 Vin (min) (V) 4 Vout (max) (V) 5.5 Vout (min) (V) 0.5 Features Adjustable current limit, Differential Remote Sense, Eco-mode, Hiccup mode protection, Output discharge, Over Current Protection, Over Voltage Protection, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Under Voltage Protection Control mode D-CAP4 Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.001 Duty cycle (max) (%) 30
Rating Catalog Topology Buck Iout (max) (A) 12 Vin (max) (V) 16 Vin (min) (V) 4 Vout (max) (V) 5.5 Vout (min) (V) 0.5 Features Adjustable current limit, Differential Remote Sense, Eco-mode, Hiccup mode protection, Output discharge, Over Current Protection, Over Voltage Protection, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Under Voltage Protection Control mode D-CAP4 Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.001 Duty cycle (max) (%) 30
WQFN-HR (VAN) 19 9 mm² (3 mm × 3 mm)
  • 4V to 16V input voltage range
  • 3.1V to 5.3V external VCC bias support
  • 8.4mΩ and 3.3mΩ MOSFETs (VVCC = 3.3V)
  • 12A continuous output current
  • Optimized 19-pin WQFN-HR package for efficiency and thermal performance
  • ±1.25% output voltage accuracy with internal feedback, TJ = –40°C to +150°C
  • 0.5V to 5.5V output voltage range
  • Differential remote sense
  • D-CAP4 with ultra-fast load-step response
  • Supports all ceramic output capacitors
  • Selectable auto-skip Eco-mode for high light-load efficiency
  • Programmable valley current limit
  • 600kHz, 800kHz, 1.0MHz, 1.2MHz selectable switching frequency
  • Programmable soft-start time
  • Prebiased start-up capability
  • Open-drain power-good output
  • Overvoltage and undervoltage fault protection
  • 3mm × 3mm (0.4mm pin pitch), 19-pin QFN package
  • Pin-to-pin compatible with 20A TPS548B23
  • 4V to 16V input voltage range
  • 3.1V to 5.3V external VCC bias support
  • 8.4mΩ and 3.3mΩ MOSFETs (VVCC = 3.3V)
  • 12A continuous output current
  • Optimized 19-pin WQFN-HR package for efficiency and thermal performance
  • ±1.25% output voltage accuracy with internal feedback, TJ = –40°C to +150°C
  • 0.5V to 5.5V output voltage range
  • Differential remote sense
  • D-CAP4 with ultra-fast load-step response
  • Supports all ceramic output capacitors
  • Selectable auto-skip Eco-mode for high light-load efficiency
  • Programmable valley current limit
  • 600kHz, 800kHz, 1.0MHz, 1.2MHz selectable switching frequency
  • Programmable soft-start time
  • Prebiased start-up capability
  • Open-drain power-good output
  • Overvoltage and undervoltage fault protection
  • 3mm × 3mm (0.4mm pin pitch), 19-pin QFN package
  • Pin-to-pin compatible with 20A TPS548B23

The TPS548A23 device is a small, high-efficiency, synchronous buck converter with an adaptive on-time D-CAP4 control mode. The control method provides low minimum on-time and fast load-transient response across the entire output voltage range without requiring an external compensation network. Because external compensation is not required, the device is easy to use and requires few external components.The device is well-designed for space-constrained data center applications.

The TPS548A23 device has differential remote sense, high-performance integrated MOSFETs, a ±1.0% reference voltage for external feedback, and supports ±1.25% output voltage accuracy with internal reference. The device features accurate load and line regulation and Eco-mode or Forced Continuous Conduction Mode (FCCM) operation. Pin strap options allow for configuration of the overcurrent limit, fault response, internal or external feedback, output voltage selection, switching frequency, and soft-start time.

The internal 3.0V LDO can be over-driven with an external 3.1V to 5.3V supply through the VCC pin to improve efficiency and reduce power dissipation.

The TPS548A23 device is a lead-free device. The device is RoHS compliant without exemption.

The TPS548A23 device is a small, high-efficiency, synchronous buck converter with an adaptive on-time D-CAP4 control mode. The control method provides low minimum on-time and fast load-transient response across the entire output voltage range without requiring an external compensation network. Because external compensation is not required, the device is easy to use and requires few external components.The device is well-designed for space-constrained data center applications.

The TPS548A23 device has differential remote sense, high-performance integrated MOSFETs, a ±1.0% reference voltage for external feedback, and supports ±1.25% output voltage accuracy with internal reference. The device features accurate load and line regulation and Eco-mode or Forced Continuous Conduction Mode (FCCM) operation. Pin strap options allow for configuration of the overcurrent limit, fault response, internal or external feedback, output voltage selection, switching frequency, and soft-start time.

The internal 3.0V LDO can be over-driven with an external 3.1V to 5.3V supply through the VCC pin to improve efficiency and reduce power dissipation.

The TPS548A23 device is a lead-free device. The device is RoHS compliant without exemption.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
具備升級功能,可直接投入使用替代所比較的裝置。
TPS548B23 現行 4V 至 16V、20A 同步降壓轉換器 Higher current equivalent

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS548A23 4V to 16V Input, 12A , Remote Sense Synchronous Buck Converter datasheet PDF | HTML 2025/11/21
Application brief Solving Power Design Challenges in Enterprise SSD Applications PDF | HTML 2024/9/23

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS548B23EVM — TPS548B23 評估模組

TPS548B23 評估模組 (EVM) 旨在提供快速設定以評估並熟悉 TPS548B23 裝置。此 EVM 可提供高達 20A 的連續負載電流,並在 8V 至 16V (額定 12V)的輸入電壓範圍,以及 0.5V 至 5.5V (預設為 1.0V)的輸出電壓範圍內運作。TPS548B23 使用額定 12V 匯流排,以在高達 20A 的負載電流下,產生經穩壓的 1.0V(預設)輸出。TPS548B23EVM 包含跨接器,可快速配置 CFG 針腳和測試點選擇的不同設定,以評估裝置性能。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TPS548B23 PSpice Transient Model

SLVMF93.ZIP (543 KB) - PSpice 模型
支援產品和硬體
模擬型號

TPS548x23 SIMPLIS Model

SLVMED4.ZIP (603 KB) - SIMPLIS 模型
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN-HR (VAN) 19 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片