首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器

TPS54610

現行

3V 至 6V 輸入、6A 同步降壓轉換器

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相似於所比較的產品。
TPS62867 現行 採用 1.5-mm x 2.5-mm QFN 封裝的 2.4-V 至 5.5-V 輸入、6-A 同步降壓轉換器 Newer generation of 6-A devices with <30mm² total BOM size.
TPSM82480 現行 具有 PG、模式和 VSEL 選項的 6-A、5.5-V 輸入降壓電源模組 Smaller BOM size module with power good and thermal good outputs and V-SEL function.

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 6 Vin (max) (V) 6 Vin (min) (V) 3 Vout (max) (V) 4.5 Vout (min) (V) 0.9 Features Enable, Frequency synchronization, Power good, Synchronous Rectification Control mode Voltage mode Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.011 Duty cycle (max) (%) 90
Rating Catalog Topology Buck Iout (max) (A) 6 Vin (max) (V) 6 Vin (min) (V) 3 Vout (max) (V) 4.5 Vout (min) (V) 0.9 Features Enable, Frequency synchronization, Power good, Synchronous Rectification Control mode Voltage mode Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.011 Duty cycle (max) (%) 90
HTSSOP (PWP) 28 62.08 mm² (9.7 mm × 6.4 mm)
  • 30-mΩ, 12-A Peak MOSFET Switches for High Efficiency at 6-A Continuous Output Source or Sink Current
  • Adjustable Output Voltage Down to 0.9 V With 1.0% Accuracy
  • Wide PWM Frequency: Fixed 350 kHz, 550 kHz or Adjustable 280 kHz to 700 kHz
  • Synchronizable to 700 kHz
  • Load Protected by Peak Current Limit and Thermal Shutdown
  • Integrated Solution Reduces Board Area and Component Count
  • SWIFT Documentation, Application Notes, and Design Software: www.ti.com/swift
  • 30-mΩ, 12-A Peak MOSFET Switches for High Efficiency at 6-A Continuous Output Source or Sink Current
  • Adjustable Output Voltage Down to 0.9 V With 1.0% Accuracy
  • Wide PWM Frequency: Fixed 350 kHz, 550 kHz or Adjustable 280 kHz to 700 kHz
  • Synchronizable to 700 kHz
  • Load Protected by Peak Current Limit and Thermal Shutdown
  • Integrated Solution Reduces Board Area and Component Count
  • SWIFT Documentation, Application Notes, and Design Software: www.ti.com/swift

The TPS54610 low-input voltage high-output current synchronous buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that enables maximum performance and flexibility in choosing the output filter L and C components; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 3 V; an internally or externally set slow-start circuit to limit inrush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing.

The TPS54610 is available in a thermally enhanced 28-pin HTSSOP (PWP) PowerPAD™ package, which eliminates bulky heatsinks. TI provides evaluation modules to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.

The TPS54610 low-input voltage high-output current synchronous buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that enables maximum performance and flexibility in choosing the output filter L and C components; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 3 V; an internally or externally set slow-start circuit to limit inrush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing.

The TPS54610 is available in a thermally enhanced 28-pin HTSSOP (PWP) PowerPAD™ package, which eliminates bulky heatsinks. TI provides evaluation modules to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.

下載 觀看有字幕稿的影片 影片

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS54610EVM-192 — 具可降至 0.9V 可調式輸出電壓的 6A、3-6 Vin DC/DC 轉換器

The TPS54610EVM-192 kit allows the designer to easily evaluate the TPS54610 synchronous buck DC/DC converter with integrated 6 A continuous power MOSFETs. The input range is 3-6 V and the output voltage is adjustable down to 0.9 V (module preset to 3.3 V). Other voltages are possible by changing a (...)

使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TPS54610 TINA-TI Average Reference Design

SLVMC75.TSC (1203 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

TPS54610 TINA-TI Average Spice Model

SLVMC74.ZIP (8 KB) - TINA-TI Spice 模型
支援產品和硬體
模擬型號

TPS54610 TINA-TI Transient Reference Design (Rev. A)

SLVM117 (664 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

TPS54610 TINA-TI Transient Spice Model (Rev. A)

SLVM116 (36 KB) - TINA-TI Spice 模型
支援產品和硬體
模擬型號

TPS54610 Unencrypted PSpice Average Model Package (Rev. A)

SLVM884A.ZIP (371 KB) - PSpice 模型
支援產品和硬體
模擬型號

TPS54610 Unencrypted PSpice Transient Model Package (Rev. A)

SLIM149A.ZIP (49 KB) - PSpice 模型
支援產品和硬體
參考設計

TIDA-00078 — 具有 I/Q 校正的直接降壓轉換系統

在 TSW6011EVM 的現場可編程閘陣列 (FPGA) 中實作的 I/Q 修正區塊可幫助使用者在無線系統中採用直接降頻轉換接收器架構。I/Q 校正區塊包含單分接頭盲算法,可修正複數零 IF 接收器系統中的頻率無關 I/Q 不平衡。除了 I/Q 校正區塊,FPGA 還包括一個數位增益區塊、一個數位功率測量區塊、2 個內插區塊、一個 I/Q 偏移校正區塊和一個正交混合區塊。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (PWP) 28 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片