首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器

TPS54560B

現行

具 Eco-Mode™ 的 4.5V 至 60V 輸入、5A 降壓 DC-DC 轉換器

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同,但針腳輸出與所比較的裝置不同。
LM70660 現行 高密度、4.5V 至 65V 輸入、6A 低 EMI 同步 DC/DC 降壓轉換器 Higher efficiency, lower IQ and improved EMI mitigation features
LM76005 現行 3.5-V 至 60-V、5-A 同步降壓轉換器 Smaller solution size, higher efficiency and lower EMI.

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 5 Vin (max) (V) 60 Vin (min) (V) 4.5 Vout (max) (V) 58.8 Vout (min) (V) 0.8 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Pre-Bias Start-Up, Wettable flanks package Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000146 Duty cycle (max) (%) 98
Rating Catalog Topology Buck Iout (max) (A) 5 Vin (max) (V) 60 Vin (min) (V) 4.5 Vout (max) (V) 58.8 Vout (min) (V) 0.8 Features Enable, Frequency synchronization, Light Load Efficiency, Over Current Protection, Pre-Bias Start-Up, Wettable flanks package Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000146 Duty cycle (max) (%) 98
HSOIC (DDA) 8 29.4 mm² (4.9 mm × 6 mm)
  • High efficiency at light loads with pulse skipping Eco-mode™
  • 92-mΩ high-side MOSFET
  • 146-µA operating quiescent current and
    2-µA shutdown current
  • 100-kHz to 2.5-MHz Fixed switching frequency
  • Synchronizes to external clock
  • Low dropout at light loads with integrated BOOT recharge FET
  • Adjustable UVLO and hysteresis
  • 0.8 V 1% Internal voltage reference
  • 8-Pin HSOIC with PowerPAD™ package
  • –40°C to 150°C TJ operating range
  • Create a custom design using the TPS54560B with the WEBENCH® Power Designer
  • High efficiency at light loads with pulse skipping Eco-mode™
  • 92-mΩ high-side MOSFET
  • 146-µA operating quiescent current and
    2-µA shutdown current
  • 100-kHz to 2.5-MHz Fixed switching frequency
  • Synchronizes to external clock
  • Low dropout at light loads with integrated BOOT recharge FET
  • Adjustable UVLO and hysteresis
  • 0.8 V 1% Internal voltage reference
  • 8-Pin HSOIC with PowerPAD™ package
  • –40°C to 150°C TJ operating range
  • Create a custom design using the TPS54560B with the WEBENCH® Power Designer

The TPS54560B is a 60-V, 5-A step-down regulator with an integrated high side MOSFET. Current-mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skip mode reduces no-load-supply current to 146 µA. Shutdown supply current is reduced to 2 µA when the EN (enable) pin is pulled low.

Undervoltage lockout is internally set at 4.3 V but can be increased using the EN pin. Output voltage start-up ramp is internally controlled to provide a controlled start-up and eliminate overshoot.

A wide switching frequency range allows either efficiency or external component size to be optimized. Output current is limited cycle-by-cycle. Frequency foldback and thermal shutdown protects internal and external components during an overload condition.

The TPS54560B is available in an 8-pin thermally enhanced HSOIC PowerPAD package.

The TPS54560B is a 60-V, 5-A step-down regulator with an integrated high side MOSFET. Current-mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skip mode reduces no-load-supply current to 146 µA. Shutdown supply current is reduced to 2 µA when the EN (enable) pin is pulled low.

Undervoltage lockout is internally set at 4.3 V but can be increased using the EN pin. Output voltage start-up ramp is internally controlled to provide a controlled start-up and eliminate overshoot.

A wide switching frequency range allows either efficiency or external component size to be optimized. Output current is limited cycle-by-cycle. Frequency foldback and thermal shutdown protects internal and external components during an overload condition.

The TPS54560B is available in an 8-pin thermally enhanced HSOIC PowerPAD package.

下載 觀看有字幕稿的影片 影片

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS54560EVM-515 — TPS54560 降壓 DC-DC 轉換器評估模組

The Texas Instruments TPS54560EVM-515 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS54560 Step-Down DC/DC Converter. The EVM operates from a 7V to 60V input (12V nominal) and provides a 5.0V output at 5A.
使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TPS54560 PSpice Average Model

SLVM941.ZIP (63 KB) - PSpice 模型
支援產品和硬體
模擬型號

TPS54560 PSpice Transient Model (Rev. A)

SLVM811A.ZIP (113 KB) - PSpice 模型
支援產品和硬體
模擬型號

TPS54560 TINA-TI Average Reference Design

SLVMAY4.TSC (64 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

TPS54560 TINA-TI Average Spice Model

SLVMAY3.ZIP (7 KB) - TINA-TI Spice 模型
支援產品和硬體
模擬型號

TPS54560 TINA-TI Transient Reference Design (Rev. A)

SLVM969A.TSC (903 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

TPS54560 TINA-TI Transient Spice Model

SLVM970.ZIP (50 KB) - TINA-TI Spice 模型
支援產品和硬體
模擬型號

TPS54560 Unencrypted PSpice Average Model

SLVMCU2.ZIP (1 KB) - PSpice 模型
支援產品和硬體
模擬型號

TPS54560 Unencrypted PSpice Transient Model

SLVMCU1.ZIP (5 KB) - PSpice 模型
支援產品和硬體
計算工具

SLVC452 — TPS54360 and TPS54361 Family Design Excel Tool

支援產品和硬體
計算工具

SWIFTINV-CALC — SWIFT™ Converter Inverting Buck/Boost Calculator

The SWIFTINV-CALC Excel sheet is a complementary worksheet to the SLVA317 application note. The worksheet is used to calculate the external components needed to create a negative output voltage from a positive input voltage. The tool features several families of wide input voltage, current-mode (...)

支援產品和硬體
參考設計

PMP22343 — 具有輔助輸出參考設計的 +/-40-V 反相降壓升壓

此參考設計在反相降壓升壓拓撲結構中使用 TPS54560B,以 +5-V 輸入產生 -40-V 輸出。輔助繞組會產生相對於同一地線的 +40-V 輸出。針對需要正負電壓的應用,降壓拓撲結構可以最少元件數量提供低雜訊輸出。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HSOIC (DDA) 8 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片