首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器
首頁
電源管理
DC/DC 切換穩壓器
DC/DC 轉換器

TPS544C27

預覽

4V 至 18V 輸入、35A、PMBus 與 SVID 同步降壓轉換器

立即訂購
產品規格表

TPS544C27

預覽
產品規格表 立即訂購

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 35 Vin (max) (V) 18 Vin (min) (V) 2.7 Vout (max) (V) 5.5 Vout (min) (V) 0.25 Features Adaptive/Dynamic Voltage Scaling, Adjustable current limit, Differential Remote Sense, Enable, Extended security, Forced PWM, Light load efficiency, Over Current Protection, PMBus, Power good, Pre-Bias Start-Up, SVID, Soft Start Adjustable, Synchronous Rectification, Telemetry, UVLO adjustable, VID Interface, Voltage Margining Control mode D-CAP+ Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.009 Duty cycle (max) (%) 80
Rating Catalog Topology Buck Iout (max) (A) 35 Vin (max) (V) 18 Vin (min) (V) 2.7 Vout (max) (V) 5.5 Vout (min) (V) 0.25 Features Adaptive/Dynamic Voltage Scaling, Adjustable current limit, Differential Remote Sense, Enable, Extended security, Forced PWM, Light load efficiency, Over Current Protection, PMBus, Power good, Pre-Bias Start-Up, SVID, Soft Start Adjustable, Synchronous Rectification, Telemetry, UVLO adjustable, VID Interface, Voltage Margining Control mode D-CAP+ Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.009 Duty cycle (max) (%) 80
WQFN-FCRLF (VBD) 33 20 mm² (5 mm × 4 mm)
  • Single chip power supply for SVID rails
  • Intel VR14 and VR13 compliant
  • VR14.Cloud compliant with telemetry level 2 and security level 2
  • PMBus 1.5 interface with NVM for configuration, telemetry (V/I/T) and fault reporting
  • Input voltage: 4V to 18V
  • Output voltage: 0.25V to 5.5V
  • Supports external 5V bias improving efficiency and enabling 2.7V minimum input voltage
  • Output current: 35A continuous and 40A peak
  • Cycle-by-cycle valley IOUT OCF limit programmable up to 40A
  • Input power monitoring (PIN sense)
  • Programmable DCM or FCCM operation
  • Switching frequency: 400kHz to 2MHz
  • Programmable internal loop compensation including droop (DC Load Line)
  • Programmable soft-start time from 0.5ms to 16ms
  • Programmable soft-stop time from 0.5ms to 4ms
  • Programmable output voltage slew rate: 0.625mV/µs to 25mV/µs
  • Programmable VIN UVLO, VOUT OVF/UVF, and OTF
  • Safe start-up into prebiased outputs
  • Precision voltage reference and differential remote sense for high output accuracy
    • ±0.5% tolerance from 0°C to 85°C junction
    • ±1% tolerance from –40°C to 125°C junction
  • Analog output current output pin (IMON)
  • D-CAP+™ control topology with fast transient response
  • Open-drain power-good output (VRRDY)
  • Single chip power supply for SVID rails
  • Intel VR14 and VR13 compliant
  • VR14.Cloud compliant with telemetry level 2 and security level 2
  • PMBus 1.5 interface with NVM for configuration, telemetry (V/I/T) and fault reporting
  • Input voltage: 4V to 18V
  • Output voltage: 0.25V to 5.5V
  • Supports external 5V bias improving efficiency and enabling 2.7V minimum input voltage
  • Output current: 35A continuous and 40A peak
  • Cycle-by-cycle valley IOUT OCF limit programmable up to 40A
  • Input power monitoring (PIN sense)
  • Programmable DCM or FCCM operation
  • Switching frequency: 400kHz to 2MHz
  • Programmable internal loop compensation including droop (DC Load Line)
  • Programmable soft-start time from 0.5ms to 16ms
  • Programmable soft-stop time from 0.5ms to 4ms
  • Programmable output voltage slew rate: 0.625mV/µs to 25mV/µs
  • Programmable VIN UVLO, VOUT OVF/UVF, and OTF
  • Safe start-up into prebiased outputs
  • Precision voltage reference and differential remote sense for high output accuracy
    • ±0.5% tolerance from 0°C to 85°C junction
    • ±1% tolerance from –40°C to 125°C junction
  • Analog output current output pin (IMON)
  • D-CAP+™ control topology with fast transient response
  • Open-drain power-good output (VRRDY)

The TPS544C27 device is highly integrated buck converter with D-CAP+ control topology for fast transient response. All programmable parameters can be configured by the PMBus interface and stored in non-volatile memory (NVM) as the new default values to minimize the external component count. These features make the device well-designed for space-constrained applications.

The TPS544C27 device is designed to work with Intel CPUs and fits well for single-phase, low-to-mid current SVID rails in the Intel server and SoC platforms requiring VR13, VR14, or VR14.Cloud compliance.

Fault management and status reports for the overcurrent fault (OCF), VOUT overvoltage fault (OVF), undervoltage fault (UVF), and overtemperature fault are provided on the device. The TPS544C27 device provides a full set of telemetry, including output voltage, output current, and device temperature.

TPS544C27 is a lead-free device and is RoHS compliant without exemption.

The TPS544C27 device is highly integrated buck converter with D-CAP+ control topology for fast transient response. All programmable parameters can be configured by the PMBus interface and stored in non-volatile memory (NVM) as the new default values to minimize the external component count. These features make the device well-designed for space-constrained applications.

The TPS544C27 device is designed to work with Intel CPUs and fits well for single-phase, low-to-mid current SVID rails in the Intel server and SoC platforms requiring VR13, VR14, or VR14.Cloud compliance.

Fault management and status reports for the overcurrent fault (OCF), VOUT overvoltage fault (OVF), undervoltage fault (UVF), and overtemperature fault are provided on the device. The TPS544C27 device provides a full set of telemetry, including output voltage, output current, and device temperature.

TPS544C27 is a lead-free device and is RoHS compliant without exemption.

filter 尋找其它 DC/DC 轉換器
下載 觀看有字幕稿的影片 影片
索取更多資訊

提供完整產品規格表和其它資訊。立即索取

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS544C27 4V to 18 V Input, 35 A, Buck Converter With SVID and PMBus® datasheet PDF | HTML 2024/7/31
應用說明 Point-of-Load Designs in Data Center Applications for Intel Xeon Sapphire Rapids Scalable Processors (Rev. C) PDF | HTML 2024/10/9

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS544C27EVM — TPS544C27 評估模組

TPS544C27EVM 是用於具有數位 PMBus 和序列電壓標識 (SVID) 介面的 TPS544C27 DC/DC 同步降壓轉換器的評估模組，可配合英特爾處理器。評估模組接受 8V 至 16V 輸入，並可提供高達 35A 的輸出電流。轉換器採用 D-CAP+™ 控制方案實現快速暫態響應，使用較少的輸出電容來節省電路板空間。
使用指南: PDF | HTML
支援產品和硬體
開發板

USB-TO-GPIO2 — USB-TO-GPIO2 USB 介面轉接器評估模組

此 EVM 透過標準的 A 型到迷你 B 型 USB 電纜，充當主機 PC 和一個或多個目標裝置之間的介面轉接器或橋接器。USB 介面轉接器與主機 PC 之間的通訊透過 USB 進行，而 USB 介面轉接器與目標裝置之間的通訊則是透過內部積體電路 (I²C)、通用輸入和輸出 GPIO 或兩者。橋接器會轉換 USB 和 I²C/GPIO 之間的通訊交易。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
應用軟體及架構

FUSION_DIGITAL_POWER_DESIGNER — 數位電源軟體

Fusion Digital Power™ 圖形使用者介面 (GUI) 軟體用於配置和監控選擇的德州儀器數位電源控制器和序列器/健康狀態監控器。該應用程式使用 PMBus 協定，透過 TI USB 轉接器經由序列匯流排與裝置通訊。

支援產品和硬體
設計工具

PMBUS-DESIGN-TOOL — Support PMBus Interface for Buck Converters and Modules

Digital Fusion support for PMBus converters and modules. USB-TO-GPIO2 adapter is needed.
支援產品和硬體
設計工具

TPS544C27-DESIGN — TPS544C27 Mysecure

TPS544C27 Mysecure folder
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN-FCRLF (VBD) 33 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片