首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器

TPS54318

現行

2.95V 至 6V 輸入、3A 同步降壓式 SWIFT™ 轉換器

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相似於所比較的產品。
TPS62813-Q1 現行 具有固定 Fsw 和 SYNC 並採用 2 mm x 3 mm 可潤濕側翼封裝的車用 2.75V 至 6V、3A 降壓轉換器 Smaller solution size and high accuracy.

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 6 Vin (min) (V) 2.95 Vout (max) (V) 4.5 Vout (min) (V) 0.8 Features Enable, Frequency synchronization, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, UVLO adjustable Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.00035 Duty cycle (max) (%) 98
Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 6 Vin (min) (V) 2.95 Vout (max) (V) 4.5 Vout (min) (V) 0.8 Features Enable, Frequency synchronization, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, UVLO adjustable Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.00035 Duty cycle (max) (%) 98
WQFN (RTE) 16 9 mm² (3 mm × 3 mm)
  • Two, 30-mΩ (typical) MOSFETs for High-Efficiency at 3-A loads
  • Switching Frequency: 200 kHz to 2 MHz
  • Voltage Reference Over Temperature: 0.8 V ± 1%
  • Synchronizes to External Clock
  • Adjustable Soft Start/Sequencing
  • UV and OV Power-Good Output
  • Low Operating and Shutdown Quiescent Current
  • Safe Start-Up into Prebiased Output
  • Cycle-by-Cycle Current Limit, Thermal and Frequency Foldback Protection
  • Operating Junction Temperature Range: –40°C to 150°C
  • Thermally Enhanced 3 mm × 3 mm 16-pin WQFN Package
  • Create a Custom Design Using the TPS54318 With the WEBENCH® Power Designer
  • Two, 30-mΩ (typical) MOSFETs for High-Efficiency at 3-A loads
  • Switching Frequency: 200 kHz to 2 MHz
  • Voltage Reference Over Temperature: 0.8 V ± 1%
  • Synchronizes to External Clock
  • Adjustable Soft Start/Sequencing
  • UV and OV Power-Good Output
  • Low Operating and Shutdown Quiescent Current
  • Safe Start-Up into Prebiased Output
  • Cycle-by-Cycle Current Limit, Thermal and Frequency Foldback Protection
  • Operating Junction Temperature Range: –40°C to 150°C
  • Thermally Enhanced 3 mm × 3 mm 16-pin WQFN Package
  • Create a Custom Design Using the TPS54318 With the WEBENCH® Power Designer

TheTPS54318 device is a full-featured, 6-V, 3-A, synchronous, step-down current-mode converter with two integrated MOSFETs.

The TPS54318 device enables small designs by integrating the MOSFETs, implementing current mode control to reduce external component count, reducing inductor size by enabling up to 2-MHz switching frequency, and minimizing the device footprint with a small, 3 mm x 3 mm, thermally enhanced, QFN package.

The TPS54318 device provides accurate regulation for a variety of loads with an accurate ±1% voltage reference (VREF) over temperature.

Efficiency is maximized through the integrated 30-mΩ MOSFETs and a 350-µA typical supply current. Using the EN pin, shutdown supply current is reduced to 2 µA by entering a shutdown mode.

Undervoltage lockout is internally set at 2.6 V, but can be increased by programming the threshold with a resistor network on the enable pin. The output voltage startup ramp is controlled by the soft-start pin. An open-drain power-good signal indicates the output is within 93% to 107% of its nominal voltage. Frequency foldback and thermal shutdown protects the device during an overcurrent condition.

For more SWIFT™ documentation, see the TI website at www.ti.com/swift.

TheTPS54318 device is a full-featured, 6-V, 3-A, synchronous, step-down current-mode converter with two integrated MOSFETs.

The TPS54318 device enables small designs by integrating the MOSFETs, implementing current mode control to reduce external component count, reducing inductor size by enabling up to 2-MHz switching frequency, and minimizing the device footprint with a small, 3 mm x 3 mm, thermally enhanced, QFN package.

The TPS54318 device provides accurate regulation for a variety of loads with an accurate ±1% voltage reference (VREF) over temperature.

Efficiency is maximized through the integrated 30-mΩ MOSFETs and a 350-µA typical supply current. Using the EN pin, shutdown supply current is reduced to 2 µA by entering a shutdown mode.

Undervoltage lockout is internally set at 2.6 V, but can be increased by programming the threshold with a resistor network on the enable pin. The output voltage startup ramp is controlled by the soft-start pin. An open-drain power-good signal indicates the output is within 93% to 107% of its nominal voltage. Frequency foldback and thermal shutdown protects the device during an overcurrent condition.

For more SWIFT™ documentation, see the TI website at www.ti.com/swift.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
TPS62813M 現行 採用 2-mm x 3-mm QFN 封裝,具有 -55C 擴展溫度的 2.75-V 至 6-V、3-A 降壓轉換器 Extended temperature -55 to +150.
TPSM82813 現行 具備選用頻率同步化、可調整緩啟動和追蹤功能的 6V 3A 降壓模組 Module with integrated inductor.

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 9
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS54318 2.95-V to 6-V Input, 3-A Output, 2-MHz, Synchronous Step-Down SWIFT™ Converter datasheet (Rev. C) PDF | HTML 2018/4/6
應用說明 Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 2024/3/25
選擇指南 Buck Converter Quick Reference Guide (Rev. B) 2021/4/8
應用說明 Calculating Efficiency (Rev. A) 2020/3/6
選擇指南 SWIFT DC/DC Converters Selector Guide (Rev. G) 2019/2/6
選擇指南 Power Management Guide 2018 (Rev. R) 2018/6/25
應用說明 Understanding Thermal Dissipation and Design of a Heatsink 2011/5/4
應用說明 Designing Type III Compensation for Current Mode Step-Down Converters (Rev. A) 2010/9/15
使用指南 TPS54318EVM-512 3-A, SWIFT Regulator Evaluation Module 2009/9/23

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

TPS54318 TINA-TI Transient Reference Design

SLVM651.TSC (172 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

TPS54318 TINA-TI Transient Spice Model

SLVM652.ZIP (63 KB) - TINA-TI Spice 模型
支援產品和硬體
模擬型號

TPS54318 Unencrypted PSpice Average Model Package (Rev. A)

SLVM897A.ZIP (36 KB) - PSpice 模型
支援產品和硬體
模擬型號

TPS54318 Unencrypted PSpice Transient Model Package (Rev. A)

SLVM640A.ZIP (54 KB) - PSpice 模型
支援產品和硬體
計算工具

TPS54620DESIGN-CALC — TPS54620 and TPS54XXX Current-Mode Step-Down Converter Design Calculator

The Design Calculator Plus Application Note (SLVA352A) Calculator Tool calculates the critical external component values for the TPS54620/TPS54622/TPS54521/TPS54320/TPS54618/TPS54418/TPS54318/TPS54218/TPS54319. The calculator includes power stage design, feature design and Type II and Type III (...)
支援產品和硬體
參考設計

TIDA-010131 — 適用於雷達和無線 5G 測試儀的多通道射頻收發器計時參考設計

高速終端設備(例如相位陣列雷達、無線通訊測試器和電子戰設備)的類比前端需要同步多收發器訊號鏈。各收發器訊號鏈皆包含高速、類比轉數位轉換器 (ADC)、數位轉類比轉換器 (DAC) 和時脈子系統。時脈子系統提供含精密延遲調整的低雜訊取樣時脈,以實現最低通道對通道偏斜,同時最佳系統性能,例如訊號雜訊比 (SNR)、無雜散動態範圍 (SFDR)、IMD3、有效位元數 (ENOB) 等。此參考設計展示了使用 AFE7444 EVM 的多通道 JESD204B 時脈產生功能與系統性能。利用 6 GSPS/3 GSPS DAC/ADC 時脈實現優於 10 ps 的通道對通道偏斜,支援最高 (...)
支援產品和硬體
參考設計

TIDA-01021 — 適用於 DSO、雷達和 5G 無線測試儀的多通道 JESD204B 15 GHz 時鐘參考設計

高速多通道應用需要能精確管理通道間時脈偏斜的時脈解決方案,以達到最佳的系統 SNR、SFDR 和 ENOB。此參考設計利用 TI 的 LMX2594 寬頻 PLL(內建 VCO),可產生 10MHz 至 15GHz 的時脈及 JESD204B 介面用 SYSREF,支援在獨立電路板上兩個高速通道的應用。15GHz 時鐘頻率下,10kHz 偏移的相位雜訊為 < -104dBc/Hz。  使用 TI 的 ADC12DJ3200 高速轉換器 EVM,可實現板對板時脈偏斜 <10ps,並在 5.25GHz 輸入訊號下達到 49.6dB (...)
支援產品和硬體
參考設計

TIDA-01023 — 適用於雷達和 5G 無線測試器的高通道數 JESD204B 時脈產生參考設計

高速多通道應用需要能精確調整通道至通道偏斜的低雜訊、可擴充時脈解決方案,以達到最佳的系統 SNR、SFDR 和 ENOB。此參考設計支援使用一個主要時鐘和多個從屬時鐘裝置的高通道數 JESD204B 同步時鐘。此設計提供多通道 JESD204B 時鐘,使用 TI LMK04828 時鐘抖動清除器和整合 VCO 的 LMX2594 寬頻 PLL,以達到 <10 ps 的時鐘對時鐘偏斜。此設計以 3 GSPS 的速度使用 TI ADC12DJ3200 EVM 進行測試,可達到 < 50 ps 的通道對通道偏斜,並改善 SNR (...)
支援產品和硬體
參考設計

TIDA-01024 — 適用於雷達和 5G 無線測試器的高通道數 JESD204B 菊輪鍊時鐘參考設計

高速多通道應用需要能精確調整通道至通道偏斜的低雜訊、可擴充時脈解決方案,以達到最佳的系統 SNR、SFDR 和 ENOB。此參考設計支援在菊輪鍊配置中擴充 JESD204B 同步時脈。此設計提供多通道 JESD204B 時鐘,使用 TI LMK04828 時鐘抖動清除器和整合 VCO 的 LMX2594 寬頻 PLL,以達到 <10 ps 的時鐘對時鐘偏斜。此設計以 3 GSPS 的速度使用 TI ADC12DJ3200 EVM 進行測試,可達到 < 50 ps 的通道對通道偏斜,並改善 SNR (...)
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RTE) 16 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片