首頁 電源管理 電源保護開關與控制器 eFuse（整合式熱插拔）
首頁
電源管理
電源保護開關與控制器
eFuse（整合式熱插拔）

TPS2640

現行

具有整合式反向輸入極性保護的 42-V、2-A 工業 eFuse

立即訂購
產品規格表

TPS2640

現行
產品規格表 立即訂購

產品詳細資料

Vabsmax_cont (V) 45 Vin (max) (V) 42 Vin (min) (V) 4.2 Current limit (max) (A) 2.23 Current limit (min) (A) 0.1 Features Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Reverse current blocking always, Reverse polarity protection, Short-circuit protection, Thermal shutdown, adjustable UVLO Overcurrent response Circuit breaker, Current limiting Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 150 Overvoltage response Clamp, Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.0058 Quiescent current (Iq) (max) (A) 0.008 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
Vabsmax_cont (V) 45 Vin (max) (V) 42 Vin (min) (V) 4.2 Current limit (max) (A) 2.23 Current limit (min) (A) 0.1 Features Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Reverse current blocking always, Reverse polarity protection, Short-circuit protection, Thermal shutdown, adjustable UVLO Overcurrent response Circuit breaker, Current limiting Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 150 Overvoltage response Clamp, Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.0058 Quiescent current (Iq) (max) (A) 0.008 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
VQFN (RHF) 24 20 mm² (5 mm × 4 mm) HTSSOP (PWP) 16 32 mm² (5 mm × 6.4 mm)

  • 4.2-V to 42-V operating voltage, 45-V absolute maximum

  • Integrated reverse input polarity protection down to –42 V
    • Zero additional components required
  • Integrated back to back MOSFETs with 150-mΩ total RON
  • 0.1-A to 2.23-A adjustable current limit (±5% accuracy at 1 A)
  • Load protection during surge (IEC 61000-4-5) with suitable TVS
  • IMON current indicator output (±8.5% accuracy)
  • Low quiescent current, 300-µA in operating, 20-µA in shutdown
  • Adjustable UVLO, OVP cut off, output slew rate control
  • Reverse current blocking
  • Available in easy-to-use 16-pin HTSSOP and 24-pin VQFN packages
  • Selectable current-limiting fault response options (auto-retry, latch off, circuit breaker modes)

  • 4.2-V to 42-V operating voltage, 45-V absolute maximum

  • Integrated reverse input polarity protection down to –42 V
    • Zero additional components required
  • Integrated back to back MOSFETs with 150-mΩ total RON
  • 0.1-A to 2.23-A adjustable current limit (±5% accuracy at 1 A)
  • Load protection during surge (IEC 61000-4-5) with suitable TVS
  • IMON current indicator output (±8.5% accuracy)
  • Low quiescent current, 300-µA in operating, 20-µA in shutdown
  • Adjustable UVLO, OVP cut off, output slew rate control
  • Reverse current blocking
  • Available in easy-to-use 16-pin HTSSOP and 24-pin VQFN packages
  • Selectable current-limiting fault response options (auto-retry, latch off, circuit breaker modes)

The TPS26400 devices are compact, feature rich high voltage eFuses with a full suite of protection features. The wide supply input range of 4.2 to 42 V allows control of many popular DC bus voltages. The device can withstand and protect the loads from positive and negative supply voltages up to ±42 V. Integrated back to back FETs provide reverse current blocking feature making the device suitable for systems with output voltage holdup requirements during power fail and brownout conditions. Load, source and device protection are provided with many adjustable features including overcurrent, output slew rate and overvoltage, undervoltage thresholds. The internal robust protection control blocks along with the high voltage rating of the TPS26400 helps to simplify the system designs for Surge protection.

A shutdown pin provides external control for enabling and disabling the internal FETs as well as placing the device in a low current shutdown mode. For system status monitoring and downstream load control, the device provides fault and precise current monitor output. The MODE pin allows flexibility to configure the device between the three current-limiting fault responses (circuit breaker, latch off, and Auto-retry modes).

The device is available in a 5-mm × 4.4-mm 16-pin HTSSOP as well as 5-mm x 4-mm 24-pin VQFN package and are specified over a –40°C to +125°C temperature range

The TPS26400 devices are compact, feature rich high voltage eFuses with a full suite of protection features. The wide supply input range of 4.2 to 42 V allows control of many popular DC bus voltages. The device can withstand and protect the loads from positive and negative supply voltages up to ±42 V. Integrated back to back FETs provide reverse current blocking feature making the device suitable for systems with output voltage holdup requirements during power fail and brownout conditions. Load, source and device protection are provided with many adjustable features including overcurrent, output slew rate and overvoltage, undervoltage thresholds. The internal robust protection control blocks along with the high voltage rating of the TPS26400 helps to simplify the system designs for Surge protection.

A shutdown pin provides external control for enabling and disabling the internal FETs as well as placing the device in a low current shutdown mode. For system status monitoring and downstream load control, the device provides fault and precise current monitor output. The MODE pin allows flexibility to configure the device between the three current-limiting fault responses (circuit breaker, latch off, and Auto-retry modes).

The device is available in a 5-mm × 4.4-mm 16-pin HTSSOP as well as 5-mm x 4-mm 24-pin VQFN package and are specified over a –40°C to +125°C temperature range
filter 尋找其它 eFuse（整合式熱插拔）
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
TPS2660 現行 具有整合式輸入反向極性防護功能的 4.2V 至 60V、150mΩ、0.1-2.23A eFuse 60-V eFuse designed for surge immunity and SELV applications
功能相似於所比較的產品。
TPS1641 現行 具有輸出功率限制的 2.7-V 至 40-V、152-mΩ、1.8-A eFuse 2.7 to 36-V eFuse without reverse current blocking and output power limiting.

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS2640 42-V, 2-A eFuse with Integrated Reverse Input Polarity Protection datasheet (Rev. A) PDF | HTML 2021/6/1
證書 TPS2640 UL Certificate of Compliance IEC 62368-1 2021/7/23
證書 TPS2640 UL Certificate of Compliance 2021/7/20
證書 TPS2640EVM EU Declaration of Conformity (DoC) 2020/7/22

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS2640EVM — 具整合式反向輸入極性保護 EVM 的 TPS2640x 42-V、2-A 工業 eFuse

TPS2640EVM 可對 TI 的 TPS2640 裝置進行參考電路評估。TPS2640 是一款具整合式背對背 FET、可編程欠電壓、過電壓、反向極性、過電流、突波電流保護和輸出電流監控功能的精巧型 4.2 V 至 42 V、2.23 A 的工業 eFuse。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TPS26400 PSPICE Transient Model

SLVMDF4.ZIP (305 KB) - PSpice 模型
支援產品和硬體
計算工具

SLVRBG7 — TPS2640 Design Calculator

支援產品和硬體
計算工具

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RHF) 24 Ultra Librarian
HTSSOP (PWP) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片