首頁 電源管理 電源保護開關與控制器 eFuse（整合式熱插拔）
首頁
電源管理
電源保護開關與控制器
eFuse（整合式熱插拔）

TPS25985

現行

具有精確和快速電流監視器的 4.5-V 至 16-V、0.59-mΩ、80-A 堆疊式精巧 eFuse

立即訂購
產品規格表

TPS25985

現行
產品規格表 立即訂購

產品詳細資料

Vabsmax_cont (V) 20 Vin (max) (V) 16 Vin (min) (V) 4.5 Current limit (max) (A) 60 Current limit (min) (A) 10 Features Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Power good signal, Stackable, Thermal shutdown, adjustable UVLO Overcurrent response Circuit breaker Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 0.59 Overvoltage response Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.00045 Quiescent current (Iq) (max) (A) 0.00055 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
Vabsmax_cont (V) 20 Vin (max) (V) 16 Vin (min) (V) 4.5 Current limit (max) (A) 60 Current limit (min) (A) 10 Features Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Power good signal, Stackable, Thermal shutdown, adjustable UVLO Overcurrent response Circuit breaker Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 0.59 Overvoltage response Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.00045 Quiescent current (Iq) (max) (A) 0.00055 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
VQFN-HR (RQP) 26 22.5 mm² (5 mm × 4.5 mm)
  • Input operating voltage range: 4.5 V to 16 V
    • 20-V absolute maximum
    • Withstands negative voltages up to –1 V at output
  • Integrated FET with low on-resistance: 0.59 mΩ (typ.)
  • Rated for 60-A RMS current and 80-A peak current
  • Supports parallel connection of multiple eFuses for higher current support
    • Active device state synchronization and load sharing during start-up and steady-state for unlimited scalability
  • Robust overcurrent protection
    • Adjustable overcurrent threshold (IOCP): 10 A to 60 A with accuracy of ±6% (max.)
    • Circuit-breaker response during steady state operation with adjustable transient blanking timer (ITIMER) to support peak currents up to 2 × IOCP
    • Adjustable active current limit during start-up (ILIM)
  • Robust short-circuit protection
    • Fast-trip response (< 200 ns) to output short-circuit events
    • Adjustable (2 × IOCP )and fixed thresholds
    • Immune to supply line transients — no nuisance tripping
  • Precise analog load current monitoring
    • ±1.4% accuracy
    • > 500-kHz bandwidth
  • Fast overvoltage protection (fixed 16.6-V threshold)
  • Adjustable output slew rate control (dVdt) for inrush current protection
  • Active high enable input with adjustable undervoltage lockout (UVLO)
  • Overtemperature Protection (OTP) to ensure FET SOA
    • Assured FET SOA: 12 W√s
  • Integrated FET health monitoring and reporting
  • Analog die temperature monitor output (TEMP)
  • Dedicated fault indication pin (FLT)
  • Power Good indication pin (PG)
  • Uncommitted general purpose fast comparator
  • Small footprint: QFN 4.5-mm × 5-mm, 0.6-mm pitch
    • 29-mil clearance between power and GND pins
  • 100% Pb Free
  • Input operating voltage range: 4.5 V to 16 V
    • 20-V absolute maximum
    • Withstands negative voltages up to –1 V at output
  • Integrated FET with low on-resistance: 0.59 mΩ (typ.)
  • Rated for 60-A RMS current and 80-A peak current
  • Supports parallel connection of multiple eFuses for higher current support
    • Active device state synchronization and load sharing during start-up and steady-state for unlimited scalability
  • Robust overcurrent protection
    • Adjustable overcurrent threshold (IOCP): 10 A to 60 A with accuracy of ±6% (max.)
    • Circuit-breaker response during steady state operation with adjustable transient blanking timer (ITIMER) to support peak currents up to 2 × IOCP
    • Adjustable active current limit during start-up (ILIM)
  • Robust short-circuit protection
    • Fast-trip response (< 200 ns) to output short-circuit events
    • Adjustable (2 × IOCP )and fixed thresholds
    • Immune to supply line transients — no nuisance tripping
  • Precise analog load current monitoring
    • ±1.4% accuracy
    • > 500-kHz bandwidth
  • Fast overvoltage protection (fixed 16.6-V threshold)
  • Adjustable output slew rate control (dVdt) for inrush current protection
  • Active high enable input with adjustable undervoltage lockout (UVLO)
  • Overtemperature Protection (OTP) to ensure FET SOA
    • Assured FET SOA: 12 W√s
  • Integrated FET health monitoring and reporting
  • Analog die temperature monitor output (TEMP)
  • Dedicated fault indication pin (FLT)
  • Power Good indication pin (PG)
  • Uncommitted general purpose fast comparator
  • Small footprint: QFN 4.5-mm × 5-mm, 0.6-mm pitch
    • 29-mil clearance between power and GND pins
  • 100% Pb Free

The TPS25985x is an integrated, high-current circuit protection and power management solution in a small package. The device provides multiple protection modes using very few external components and is a robust defense against overloads, short-circuits, and excessive inrush current.

Applications with particular inrush current requirements can set the output slew rate with a single external capacitor. Output current limit level can be set by user as per system needs. A user adjustable overcurrent blanking timer allows systems to support transient peaks in the load current without tripping the eFuse.

Multiple TPS25985x devices can be connected in parallel to increase the total current capacity for high power systems. All devices actively synchronize their operating state and share current during start-up as well as steady state to avoid over-stressing some of the devices which can result in premature or partial shutdown of the parallel chain.

An integrated fast and accurate sense analog load current monitor facilitates predictive maintenance and advanced dynamic platform power management techniques such as Intel PSYS and PROCHOT# to maximize system throughput and power supply utilization.

The devices are characterized for operation over a junction temperature range of –40°C to +125°C.

The TPS25985x is an integrated, high-current circuit protection and power management solution in a small package. The device provides multiple protection modes using very few external components and is a robust defense against overloads, short-circuits, and excessive inrush current.

Applications with particular inrush current requirements can set the output slew rate with a single external capacitor. Output current limit level can be set by user as per system needs. A user adjustable overcurrent blanking timer allows systems to support transient peaks in the load current without tripping the eFuse.

Multiple TPS25985x devices can be connected in parallel to increase the total current capacity for high power systems. All devices actively synchronize their operating state and share current during start-up as well as steady state to avoid over-stressing some of the devices which can result in premature or partial shutdown of the parallel chain.

An integrated fast and accurate sense analog load current monitor facilitates predictive maintenance and advanced dynamic platform power management techniques such as Intel PSYS and PROCHOT# to maximize system throughput and power supply utilization.

The devices are characterized for operation over a junction temperature range of –40°C to +125°C.
filter 尋找其它 eFuse（整合式熱插拔）
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
TPS25990 現行 具備數位遙測控制器的 2.9-V 至 16-V、0.79-mΩ、60-A eFuse With PMBUS
功能相似於所比較的產品。
TPS24771 現行 具高性能類比電流監視器的 2.5V 至 18V 熱插拔控制器 Offers similar voltage range with higher current limit

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 8
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS25985x 4.5 V – 16 V, 0.59-mΩ, 80-A Stackable eFuse with Accurate and Fast Current Monitor datasheet (Rev. A) PDF | HTML 2022/9/29
應用說明 Active Current Sharing: Advanced Current Distribution Feature From TI's Smart eFuses PDF | HTML 2025/5/9
應用說明 Enhancing Server Power Design Using Advanced Features of TI’s Smart eFuses PDF | HTML 2025/1/29
應用說明 Implementation of PSYS Monitor Using TPS25984, TPS25985, or TPS25990 eFuses PDF | HTML 2023/11/15
技術文章 Managing thermals: 3 ways to break through power-density barriers PDF | HTML 2022/10/16
技術文章 How a fully-stackable eFuse can help meet ever-increasing power needs of servers PDF | HTML 2022/10/3
證書 TPS25985EVM EU RoHS Declaration of Conformity (DoC) (Rev. A) 2022/9/15
應用說明 How eFuse Ensures Integrated FET Operation in Safe Operating Area PDF | HTML 2022/9/7

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS25985EVM — 適用於 4.5-V 至 16-V、80-A、0.59-mΩ eFuse 的 TPS25985 評估模組

TPS25985EVM eFuse 評估板允許對 TPS25985 eFuse 進行參考電路評估。TPS25985 裝置為一搭載整合式 0.59-mΩ FET 及過電流、突波電流防護、可調式過電流瞬態消隱定時器、可編程欠電壓和過電壓防護的 4.5-V 至 16-V、80-A eFuse。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TPS25985x PSpice Transient Model (Rev. A)

SLVMDZ3A.ZIP (220 KB) - PSpice 模型
支援產品和硬體
計算工具

SLVRBL0 — TPS25985 Design Calculator

支援產品和硬體
計算工具

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
支援產品和硬體
參考設計

TIDA-050077 — 採用可堆疊式 eFuse 的 4kW、12V 輸入電源路徑保護參考設計

本參考設計展示適用於資料中心伺服器的 12V、4kW 輸入電源路徑保護系統，採用六台 TPS25985 eFuse 裝置並聯架構。TPS25985x 是一款精巧、封裝整合式、可平行高電流電路保護和電源管理裝置。此參考設計的主要目標是展示兩台裝置位於相同區域時，TPS25985 eFuse 的熱性能：一個位於 PCB 上方，另一個位於底部。在此配置中，四台裝置位於頂層，而另兩台裝置位於底層，直接與頂層的第二台和第三台設備對齊。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN-HR (RQP) 26 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片