首頁 電源管理 電源保護開關與控制器 eFuse(整合式熱插拔)

TPS25980

現行

具可調式瞬態故障管理的 2.7-V 至 24-V、8-A、3-mΩ 智慧型 eFuse

產品詳細資料

Vabsmax_cont (V) 30 Vin (max) (V) 24 Vin (min) (V) 2.7 Current limit (max) (A) 8 Current limit (min) (A) 2 Features Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Power good signal, Short-circuit protection, adjustable UVLO UL recognition IEC62368, UL2367 Overcurrent response Circuit breaker Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 3 Overvoltage response Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.0008 Quiescent current (Iq) (max) (A) 0.0012 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
Vabsmax_cont (V) 30 Vin (max) (V) 24 Vin (min) (V) 2.7 Current limit (max) (A) 8 Current limit (min) (A) 2 Features Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Power good signal, Short-circuit protection, adjustable UVLO UL recognition IEC62368, UL2367 Overcurrent response Circuit breaker Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 3 Overvoltage response Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.0008 Quiescent current (Iq) (max) (A) 0.0012 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
VQFN (RGE) 24 16 mm² (4 mm × 4 mm)
  • Wide input voltage range: 2.7V to 24V
    • 30V Absolute maximum
  • Low On-Resistance: RON = 3mΩ typical
  • Circuit Breaker Response
  • Adjustable current limit threshold
    • Range: 2A to 8A
    • Accuracy: ± 8% (typical for ILIM > 5A)
  • Adjustable over-current blanking timer
    • Handles load transients without tripping
  • Accurate current monitor output
    • ± 3% (typical at 25°C for IOUT > 3A)
  • User configurable fault response
    • Latch-off or auto-retry
    • Number of retries (Finite or indefinite)
    • Delay between retries
  • Robust short-circuit protection
    • Fast-trip response time < 400ns typical
    • Tested against 1 million power-into-short events
    • Immune to line transients - no nuisance tripping
  • Adjustable output slew rate (dVdt) control
  • Adjustable undervoltage lockout
  • Overvoltage lockout (Fixed 3.7V, 7.6V, 16.9V and no-OVLO options)
  • Integrated overtemperature protection
  • Power good indication
  • Adjustable load detect and handshake timer
  • UL 2367 Recognition
    • File no. E339631
    • RILIM ≥ 182Ω
  • IEC 62368 CB Certification
  • Small footprint: 4mm × 4mm QFN package
  • Wide input voltage range: 2.7V to 24V
    • 30V Absolute maximum
  • Low On-Resistance: RON = 3mΩ typical
  • Circuit Breaker Response
  • Adjustable current limit threshold
    • Range: 2A to 8A
    • Accuracy: ± 8% (typical for ILIM > 5A)
  • Adjustable over-current blanking timer
    • Handles load transients without tripping
  • Accurate current monitor output
    • ± 3% (typical at 25°C for IOUT > 3A)
  • User configurable fault response
    • Latch-off or auto-retry
    • Number of retries (Finite or indefinite)
    • Delay between retries
  • Robust short-circuit protection
    • Fast-trip response time < 400ns typical
    • Tested against 1 million power-into-short events
    • Immune to line transients - no nuisance tripping
  • Adjustable output slew rate (dVdt) control
  • Adjustable undervoltage lockout
  • Overvoltage lockout (Fixed 3.7V, 7.6V, 16.9V and no-OVLO options)
  • Integrated overtemperature protection
  • Power good indication
  • Adjustable load detect and handshake timer
  • UL 2367 Recognition
    • File no. E339631
    • RILIM ≥ 182Ω
  • IEC 62368 CB Certification
  • Small footprint: 4mm × 4mm QFN package

The TPS25980x family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices are operational over a wide input voltage range. A single part caters to low-voltage systems needing minimal I*R voltage drop as well as higher voltage, high current systems needing low power dissipation. They are a robust defense against overloads, short-circuits, voltage surges and excessive inrush current.

Overvoltage events are limited by internal cutoff circuits, with multiple device options to select the overvoltage threshold.

The device provides a circuit-breaker response to overcurrent conditions. The overcurrent limit (circuit-breaker threshold) and fast-trip (short-circuit) threshold can be set with a single external resistor. The devices intelligently manage the overcurrent response by distinguishing between transient events and actual faults, thereby allowing the system to function uninterrupted during line and load transients without compromising on the robustness of the protection against faults. The device can be configured to stay latched off or retry automatically after a fault shutdown. The number of auto-retries as well as the retry delay are configurable with capacitors. This enables remote systems to automatically recover from temporary faults while ensuring that power supplies are not stressed indefinitely due to a persistent fault.

The TPS25980x devices are available in a small 4mm × 4mm QFN package. The devices are characterized for operation over a junction temperature range from –15°C to 125°C.

The TPS25980x family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices are operational over a wide input voltage range. A single part caters to low-voltage systems needing minimal I*R voltage drop as well as higher voltage, high current systems needing low power dissipation. They are a robust defense against overloads, short-circuits, voltage surges and excessive inrush current.

Overvoltage events are limited by internal cutoff circuits, with multiple device options to select the overvoltage threshold.

The device provides a circuit-breaker response to overcurrent conditions. The overcurrent limit (circuit-breaker threshold) and fast-trip (short-circuit) threshold can be set with a single external resistor. The devices intelligently manage the overcurrent response by distinguishing between transient events and actual faults, thereby allowing the system to function uninterrupted during line and load transients without compromising on the robustness of the protection against faults. The device can be configured to stay latched off or retry automatically after a fault shutdown. The number of auto-retries as well as the retry delay are configurable with capacitors. This enables remote systems to automatically recover from temporary faults while ensuring that power supplies are not stressed indefinitely due to a persistent fault.

The TPS25980x devices are available in a small 4mm × 4mm QFN package. The devices are characterized for operation over a junction temperature range from –15°C to 125°C.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
TPS25982 現行 具有熱插拔保護和可調整故障管理功能、±1.5% 電流監控器的 2.7V 至 24V、2.7mΩ、15A eFuse Higher current device
功能相同,但針腳輸出與所比較的裝置不同。
TPS25981 現行 具有瞬態過流消隱定時器的 2.7-V 至 16-V、10-A、6-mΩ eFuse eFuse with higher current and smaller package option.

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS25980: 2.7- 24V, 8A, 3mΩ Smart eFuse - Integrated Hot-swap Protection With Adjustable Transient Fault Management datasheet (Rev. A) PDF | HTML 2026/5/19

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS25980EVM — TPS25980x eFuse 評估模組

TPS25980EVM eFuse 評估板可對德州儀器 TPS25980x eFuse 裝置進行參考電路評估。TPS25980x 裝置為一款 2.7 V 至 24 V 8-A eFuse,具整合式 3 mOhm FET、可編程欠電壓、過電流、突波電流保護及可配置自動重試次數和重試延遲功能。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TPS25980XYNRGE PSPICE Model

SLVMDE1.ZIP (184 KB) - PSpice 模型
支援產品和硬體
計算工具

SLVRBG1 — TPS25980 Design Calculator

支援產品和硬體
計算工具

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGE) 24 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片