首頁 介面 USB IC USB Type-C 與 USB 電源傳輸 IC
首頁
介面
USB IC
USB Type-C 與 USB 電源傳輸 IC

TPS25750

不推薦在新設計中採用

具有預先配置 GUI 的高度整合 USB Type-C® 和 USB PD 控制器

立即訂購
產品規格表
TPS25750 不建議用於新設計
此產品將繼續向現有客戶提供。新設計應考量替代產品。
open-in-new 比較替代產品
功能與所比較的裝置相似
TPS25751 現行 具有濕度偵測與可編程電源供應的 USB-C® PD 3.2 控制器 Supports PD3.1 with liquid detection and PPS support

TPS25750

不推薦在新設計中採用
產品規格表 立即訂購

產品詳細資料

Function Type-C Type PD controller Power role DRP, Sink Rating Catalog Internal power path 20 V 5 A, 5 V 3 A Data role DFP, DRD, DRP Alternate mode No External power-path control NFET Dead battery support Yes Operating temperature range (°C) -40 to 125
Function Type-C Type PD controller Power role DRP, Sink Rating Catalog Internal power path 20 V 5 A, 5 V 3 A Data role DFP, DRD, DRP Alternate mode No External power-path control NFET Dead battery support Yes Operating temperature range (°C) -40 to 125
VQFN (RSM) 32 16 mm² 4 x 4 WQFN (RJK) 38 24 mm² 6 x 4

  • Integrated fully managed power paths

    • Integrated 5-V, 3-A, 36-mΩ sourcing switch (TPS25750S/D)

    • Integrated 28-V, 7-A, 16-mΩ bi-directional load switch (TPS25750D only)

  • Standalone USB Type-C PD solution

    • No firmware development or external micro-controller needed

  • Integrated robust power path protection

    • Integrated reverse current protection, overvoltage protection, and slew rate control the high-voltage bi-directional power path

    • Integrated undervoltage and overvoltage protection and current limiting for inrush current protection for the 5V/3A source power path
    • 26-V tolerant CC pins for robust protection when connected to non-compliant devices
  • Optimized for power applications
    • Integrated I2C control for TI battery chargers
    • Web-based GUI and pre-configured firmware
    • Optimized for power consumer only (sink) (UFP) applications
    • Optimized for power provider (source) and power consumer (sink) (DRP) applications
  • USB Type-C power delivery (PD) controller
    • 10 configurable GPIOs
    • BC1.2 charging support
    • USB PD 3.0 compliant
    • USB Type-C specification complaint
    • Cable attach and orientation detection
    • Integrated VCONN switch
    • Physical layer and policy engine
    • 3.3-V LDO output for dead battery support
    • Power supply from 3.3 V or VBUS source

  • Integrated fully managed power paths

    • Integrated 5-V, 3-A, 36-mΩ sourcing switch (TPS25750S/D)

    • Integrated 28-V, 7-A, 16-mΩ bi-directional load switch (TPS25750D only)

  • Standalone USB Type-C PD solution

    • No firmware development or external micro-controller needed

  • Integrated robust power path protection

    • Integrated reverse current protection, overvoltage protection, and slew rate control the high-voltage bi-directional power path

    • Integrated undervoltage and overvoltage protection and current limiting for inrush current protection for the 5V/3A source power path
    • 26-V tolerant CC pins for robust protection when connected to non-compliant devices
  • Optimized for power applications
    • Integrated I2C control for TI battery chargers
    • Web-based GUI and pre-configured firmware
    • Optimized for power consumer only (sink) (UFP) applications
    • Optimized for power provider (source) and power consumer (sink) (DRP) applications
  • USB Type-C power delivery (PD) controller
    • 10 configurable GPIOs
    • BC1.2 charging support
    • USB PD 3.0 compliant
    • USB Type-C specification complaint
    • Cable attach and orientation detection
    • Integrated VCONN switch
    • Physical layer and policy engine
    • 3.3-V LDO output for dead battery support
    • Power supply from 3.3 V or VBUS source

The TPS25750 is a highly integrated stand-alone USB Type-C and Power Delivery (PD) controller optimized for applications supporting USB-C PD Power. The TPS25750 integrates fully managed power paths with robust protection for a complete USB-C PD solution. The TPS25750 also integrates control for external battery charger ICs for added ease of use and reduced time to market. The intuitive web based GUI will ask the user a few simple questions on the applications needs using clear block diagrams and simple multiple-choice questions. As a result, the GUI will create the configuration image for the user’s application, reducing much of the complexity associated with competitive USB PD solutions.

The TPS25750 is a highly integrated stand-alone USB Type-C and Power Delivery (PD) controller optimized for applications supporting USB-C PD Power. The TPS25750 integrates fully managed power paths with robust protection for a complete USB-C PD solution. The TPS25750 also integrates control for external battery charger ICs for added ease of use and reduced time to market. The intuitive web based GUI will ask the user a few simple questions on the applications needs using clear block diagrams and simple multiple-choice questions. As a result, the GUI will create the configuration image for the user’s application, reducing much of the complexity associated with competitive USB PD solutions.
filter 尋找其它 USB Type-C 與 USB 電源傳輸 IC
下載

索取更多資訊

  • TPS25750 圖形使用者介面 (GUI) 可使用。開始開發
  • 若您設計的電池供電系統為 45W 以下，請考慮加上我們的配套裝置 BQ25792 或 BQ25790 來完成您的設計
  • 若您設計的電池供電系統為 45W 以上，請考慮加上我們的配套裝置 BQ25731 來完成您的設計

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet TPS25750 USB Type-C and USB PD Controller with Integrated Power Switches datasheet (Rev. A) 2020年 11月 12日

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點