首頁 電源管理 電源保護開關與控制器 熱插拔控制器

TPS2400

現行

具有 100-V 輸入瞬態保護的 5.5-V 過電壓保護控制器

產品詳細資料

Vabsmax_cont (V) 110 Vin (max) (V) 100 Vin (min) (V) 3 Current limit (min) (A) 0.01 Features Overvoltage cutoff Fault response Auto-retry Overvoltage response Cut-off Rating Catalog Soft start Fixed Quiescent current (Iq) (typ) (A) 0.000065 Quiescent current (Iq) (max) (A) 0.00011 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 85
Vabsmax_cont (V) 110 Vin (max) (V) 100 Vin (min) (V) 3 Current limit (min) (A) 0.01 Features Overvoltage cutoff Fault response Auto-retry Overvoltage response Cut-off Rating Catalog Soft start Fixed Quiescent current (Iq) (typ) (A) 0.000065 Quiescent current (Iq) (max) (A) 0.00011 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 85
SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8
  • Up to 100-V Overvoltage Protection
  • 6.9-V Overvoltage Shutdown Threshold
  • 3-V Undervoltage Shutdown Threshold
  • Overvoltage Turnoff Time Less than 1 µs
  • External N-Channel MOSFET Driven by
    Internal Charge Pump
  • 1-mA Maximum Static Supply Current
  • 5-Pin SOT–23 Package
  • –40°C to 85°C Ambient Temperature Range
  • 2.5-kV Human-Body-Model, 500-V CDM
    Electrostatic Discharge Protection
  • Up to 100-V Overvoltage Protection
  • 6.9-V Overvoltage Shutdown Threshold
  • 3-V Undervoltage Shutdown Threshold
  • Overvoltage Turnoff Time Less than 1 µs
  • External N-Channel MOSFET Driven by
    Internal Charge Pump
  • 1-mA Maximum Static Supply Current
  • 5-Pin SOT–23 Package
  • –40°C to 85°C Ambient Temperature Range
  • 2.5-kV Human-Body-Model, 500-V CDM
    Electrostatic Discharge Protection

The TPS2400 overvoltage protection controller is used with an external N-channel MOSFET to isolate sensitive electronics from destructive voltage spikes and surges. It is specifically designed to prevent large voltage transients associated with automotive environments (load dump) from damaging sensitive circuitry. When potentially damaging voltage levels are detected by the TPS2400 the supply is disconnected from the load before any damage can occur.

Internal circuitry includes a trimmed band-gap reference, oscillator, Zener diode, charge pump, comparator, and control logic. The TPS2400 device is designed for use with an external N-channel MOSFET, which are readily available in a wide variety of voltages.

The TPS2400 overvoltage protection controller is used with an external N-channel MOSFET to isolate sensitive electronics from destructive voltage spikes and surges. It is specifically designed to prevent large voltage transients associated with automotive environments (load dump) from damaging sensitive circuitry. When potentially damaging voltage levels are detected by the TPS2400 the supply is disconnected from the load before any damage can occur.

Internal circuitry includes a trimmed band-gap reference, oscillator, Zener diode, charge pump, comparator, and control logic. The TPS2400 device is designed for use with an external N-channel MOSFET, which are readily available in a wide variety of voltages.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能與所比較的裝置相似
TPS2595 現行 採用小型 WSON 封裝且具有過電壓保護的 2.7V 至 18V、34mΩ、0.5-4A eFuse This product has full integrated low Ron and high current eFuse with accurate load current monitor.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet TPS2400 Overvoltage Protection Controller datasheet (Rev. B) PDF | HTML 2014年 8月 20日
E-book 11 Ways to Protect Your Power Path 2019年 7月 3日
Selection guide Power Management Guide 2018 (Rev. R) 2018年 6月 25日
Application note Overvoltage Protector For High-Voltage Loads 2004年 3月 29日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ADS58J64EVM — ADS58J64 評估模組

ADS58J64EVM 是用於評估德州儀器 ADS58J64 整合式接收器的評估板。ADS58J64 是一款具有緩衝類比輸入的低功率、14 位元、500-MSPS、四通道電信接收器。裝置支援 JESD204B 介面和高達 10Gbps 的資料速率。EVM 具有變壓器耦合類比和時鐘輸入,可支援單端訊號和時鐘來源,並適應廣泛的訊號頻率。類比輸入的變壓器背對背連接,以獲得更佳的振幅和相位比對性能。板載時鐘合成器/配電晶片 LMK04828 可用於為 ADC 和資料擷取板 (TSW14J56EVM) 的 JESD204B 介面提供超低抖動和相位雜訊裝置時鐘,以及比對的系統參考時鐘 (...)

使用指南: PDF
開發板

DAC38RF80EVM — DAC38RF80 雙通道、14 位元、9GSPS、6x-24x 內插、6 和 9GHz PLL DAC 評估模組

DAC38RF80EVM 是用於評估 DAC38RF80/84/90 數位類比轉換器 (DAC) 的電路板。EVM 可用於評估高達 9GSPS 取樣率的 DAC 性能。此設計可搭配基於 FPGA 的圖型產生器卡 TSW14J56EVM(Rev B 及以上版本)協同運作。EVM 中提供的 FMC 連接器亦可將 DAC 與第三方廠商的 FPGA 開發板進行介接。同時提供易於使用的軟體介面,可透過 SPI 控制 DAC 與板載的 LMK04828 時鐘晶片。

使用指南: PDF
TI.com 無法提供
開發板

DAC38RF82EVM — DAC38RF82 雙通道、14 位元、9 GSPS、1x-24x 內插、6 和 9 GHz PLL DAC 評估模組

DAC38RF82EVM 是用於評估 DAC38RF82/83/85/93 數位類比轉換器 (DAC) 的電路板。EVM 可用於評估取樣率高達 9GSPS 的 DAC 性能,其設計需與 TSW14J56 EVM 搭配使用。提供的 FMC 連接器亦可將 DAC 與第三方廠商的 FPGA 開發板進行介接。同時提供易於使用的軟體介面,可透過 SPI 控制 DAC 與板載的 LMK04828 時鐘晶片。
使用指南: PDF
TI.com 無法提供
開發板

DAC38RF89EVM — DAC38RF89 雙通道、14 位元、8.4 GSPS、1x-24x 內插、5 和 7.5 GHz PLL DAC 評估模組

DAC38RF89 評估模組 (EVM) 是用於評估 DAC38RF89 數位類比轉換器 (DAC) 的電路板。DAC38RFEVM 可用於評估取樣率高達 9GSPS 的 DAC 性能,其設計需與 TSW14J56EVM(Rev B 及以上版本)搭配使用。提供的 FMC 連接器亦可將 DAC 與第三方廠商的 FPGA 開發板進行介接。同時提供易於使用的軟體介面,可透過 SPI 控制 DAC 與板載的 LMK04828 時脈晶片。

使用指南: PDF
TI.com 無法提供
計算工具

SLUC073 TPS2400 Design Calculator

支援產品和硬體

支援產品和硬體

產品
熱插拔控制器
TPS2400 具有 100-V 輸入瞬態保護的 5.5-V 過電壓保護控制器
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一,涵蓋我們的類比和電源產品組合,以及特定類比行為模型,且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前,建立完整的終端設備設計和解決方案原型,進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中,您可以搜尋 TI (...)

許多 TI 參考設計包含 TPS2400

使用我們的參考設計選擇工具,以檢視並找出最適合您的應用和參數的設計。

封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-23 (DBV) 5 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片