TLV767-Q1
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, TA
- Junction temperature: –40°C to +150°C, TJ
- Input voltage range: 2.5 V to 16 V (18 V max)
- Output voltage range:
- 0.8 V to 14.6 V (adjustable)
- 1.2 V to 12 V (fixed)
- 1% output accuracy over load and temperature
- Low quiescent current (IQ):
- 50 µA (typ) with no load
- 4 µA (max) when disabled
- High PSRR: 70 dB at 1 kHz, 46 dB at 1 MHz
- Internal soft-start time: 500 µs (typical)
- Fold-back current limiting and thermal protection
- Stable with a 1-µF or larger capacitor
- Package: 8-pin, 3-mm × 3-mm WSON
with wettable flanks
- Low thermal resistance (RθJA): 51.9°C/W
The TLV767-Q1 is a wide input linear voltage regulator supporting an input voltage range from 2.5 V to 16 V and up to 1 A of load current. The output range is from 0.8 V to 12 V or up to 14.6 V with the adjustable version.
The wide input voltage range makes the device a good choice for operating from transformer secondary windings and regulated rails such as 10 V or 12 V. Additionally, the wide output voltage range allows the device to generate the bias voltage for silicon carbide (SiC) gate drivers and microphones as well as power microcontrollers (MCUs) and processors.
The TLV767-Q1 has a 1% output accuracy that is required for powering digital loads with tight supply requirements.
The internal soft-start circuit reduces inrush current during startup, thus allowing for smaller input capacitance.
Wide bandwidth PSRR performance is greater than 70 dB at 1 kHz and 46 dB at 1 MHz, which helps attenuate the switching frequency of an upstream DC/DC converter and minimizes post regulator filtering. The high ripple rejection from 20 Hz to 20 kHz make the device a good choice for powering audio components.
The TLV767-Q1 is available in a 8-pin, 3-mm × 3-mm VSON (DRB) package with wettable flanks and low thermal resistance.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TLV767-Q1 1-A, 16-V Linear Voltage Regulator datasheet (Rev. A) | PDF | HTML | 2020/12/7 | ||
| 應用說明 | An empirical analysis of the impact of board layout on LDO thermal performance (Rev. A) | PDF | HTML | 2025/9/23 | |||
| 功能安全資訊 | TLV767-Q1 Functional Safety FIT Rate, FMD and Pin FMA | PDF | HTML | 2023/4/28 | |||
| 應用說明 | A Topical Index of TI LDO Application Notes (Rev. F) | 2019/6/27 | ||||
| 電子書 | LDO Basics (Rev. A) | 2019/4/8 | ||||
| 技術文章 | LDO basics: dropout | PDF | HTML | 2017/3/16 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
MULTIPKGLDOEVM-823 — 支援 DBV、DRB、DRV 和 DQN 封裝的通用 LDO 線性穩壓器評估模組
MULTIPKGLDOEVM-823 評估模組 (EVM) 可協助您評估多種常用線性穩壓器封裝的運作與性能，以了解是否可在電路應用中使用。此特定 EVM 配置具有 DRB、DRV、DQN 和 DBV 元件封裝，能讓您焊接並評估低壓差 (LDO) 穩壓器。
TIDA-060054 — 人形機器人音訊子系統參考設計
此人形機器人音訊子系統參考設計包含一個 8 通道數位麥克風介面，該介面透過高性能 PDM 到 TDM 轉換器 PCMD3180-Q1 處理成單個 TDM 資料流，並包含一個數位輸入 D 類音訊放大器 TAS6511-Q1，可向 2Ω 負載提供 50W 輸出功率。
TIPA-020002 — 使用 LP8752-Q1 和 LP8756-Q1 且適用於 Semidrive X9SP (X9HP 相容) 的電源供應設計
TIPA-050043 — 適用於汽車應用的 X9H 電源供應設計
此專為 SemiDrive X9H 汽車 SoC 打造的電源供應設計，最適合汽車資訊娛樂及電子駕駛艙應用。本文件詳細說明使用 LP87565-Q1 和 LP87523-Q1 電源管理 IC (PMIC) 電源設計的設計考量。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VSON (DRB) | 8 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。