TLV710
- Very Low Dropout:
- 150mV at IOUT = 200mA and VOUT = 2.8V
- 75mV at IOUT = 100mA and VOUT = 2.8V
- 40mV at IOUT = 50mA and VOUT = 2.8V
- 2% Accuracy Over Temperature
- Low IQ of 35µA per Regulator
- Multiple Fixed Output Voltage Combinations Possible from 1.2V to 4.8V
- High PSRR: 70dB at 1kHz
- Stable with Effective Capacitance of 0.1µF(1)
- Over-Current and Thermal Protection
- Dedicated VREF for Each Output Minimizes Crosstalk
- Available in 1.5mm × 1.5mm SON-6 Package
See the in the Application Information section - APPLICATIONS
- Wireless Handsets, Smart Phones, PDAs
- MP3 Players and Other Handheld Products
All other trademarks are the property of their respective owners.
The TLV710 and TLV711 series of dual, low-dropout (LDO) linear regulators are low quiescent current devices with excellent line and load transient performance. These LDOs are designed for power-sensitive applications. These devices provide a typical accuracy of 2% over temperature.
The TLV711 series provides an active pulldown circuit to quickly discharge the outputs.
In addition, the TLV711-D series of devices have pull-down resistors at the EN pins. This design helps in disabling the device when the signal-driving EN pins are in a weak, indeterminate state (for example, the GPIO of a processor that might be three-stated during startup). The pull-down resistor pulls the voltage to the EN pins down to 0V, thus disabling the device.
The TLV710 and TLV711 series are available in a 1.5mm × 1.5mm SON-6 package, and are ideal for handheld applications.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | Dual, 200mA, Low-Iq, Low-Dropout Regulator for Portable Devices datasheet (Rev. A) | 2010/9/13 | |||
| 選擇指南 | Power Management Guide 2018 (Rev. R) | 2018/6/25 | ||||
| 選擇指南 | Low Dropout Regulators Quick Reference Guide (Rev. P) | 2018/3/21 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TLV7101828EVM-595 — 適用於雙路、200mA 輸出、低雜訊、高 PSRR、低壓差穩壓器的評估模組
TIDA-00387 — 採用雙路 LDO 的動態電壓調節
此應用解決方案詳細說明如何使用雙通道 LDO 來提供動態電壓調整輸出。為具有廣泛操作電壓範圍的微控制器供電時,此功能特別重要:請盡可能降低 MCU 的操作電壓,有助於減少耗電量。
TIPA-050009 — 使用 DDR4 的 AM62x 離散式電源供應解決方案
此電源供應設計展示了使用低成本離散式電壓穩壓器且適用於 AM62x 處理器的電源樹,並詳細說明 AM62x 不同電壓軌的特定通電/斷電順序要求。
AM62x 是異質 ARM® 處理器 Sitara™ 工業級系列的延伸,具備嵌入式 3D 繪圖加速、雙顯示介面,以及廣泛的周邊設備和網路選項。低成本 AM62x Sitara 處理器可協助客戶降低系統設計複雜性和成本。AM62x 適合各種工業應用,包括工業 HMI (人機介面)、EV 充電站、非接觸式建築物門禁和駕駛監控系統。
TIPA-050010 — 使用 TPS65381x-Q1 PMIC 的 TMS570 電源供應設計
此電源供應設計概述針對 TMS570 供電最佳化的電源管理 IC,且文件詳細說明了可協助開發人員將 TPS65381x-Q1 PMIC 整合至安全相關系統的資訊。
TPS65381x-Q1 裝置是多軌電源供應器,專為對安全相關應用中的微控制器 (MCU) 供電所設計,例如可在汽車與工業市場中看到的應用。裝置支援 TMS570 MCU 和 C2000 微控制器系列,以及具有雙核心鎖步 (LS) 或鬆散耦合架構 (LC) 的其他各種 MCU。
TPS65381x-Q1 整合多個供應軌,可為 MCU、收發器 (CAN 或其他) 和外部感測器供電。以內部 FET 將輸入電源 (電池) 轉換成 6V (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WSON (DSE) | 6 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。