首頁 放大器 比較器
首頁
放大器
比較器

TLV1H103-SEP

現行

Radiation-tolerant, 2.5ns single-channel comparator with push-pull outputs

立即訂購
產品規格表

TLV1H103-SEP

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Output type Push-Pull Propagation delay time (µs) 0.0025 Vs (max) (V) 5.5 Vs (min) (V) 2.4 Rating Space Features Adjustable Hysteresis, Latch, POR Iq per channel (typ) (mA) 5.7 Vos (offset voltage at 25°C) (max) (mV) 7 Rail-to-rail In Operating temperature range (°C) -55 to 125 Input bias current (±) (max) (nA) 5000 VICR (max) (V) 5.7 VICR (min) (V) -0.2
Number of channels 1 Output type Push-Pull Propagation delay time (µs) 0.0025 Vs (max) (V) 5.5 Vs (min) (V) 2.4 Rating Space Features Adjustable Hysteresis, Latch, POR Iq per channel (typ) (mA) 5.7 Vos (offset voltage at 25°C) (max) (mV) 7 Rail-to-rail In Operating temperature range (°C) -55 to 125 Input bias current (±) (max) (nA) 5000 VICR (max) (V) 5.7 VICR (min) (V) -0.2
SOT-23 (DBV) 6 8.12 mm² (2.9 mm × 2.8 mm)

  • VID V62/22606-01XE

  • Radiation - Total Ionizing Dose (TID)

    • TID Characterized to 30krad (Si)

    • ELDRS-Free to 30krad (Si)

    • RHA/RLAT to 30krad (Si)

  • Radiation - Single-Event Effects (SEE)

    • SEL Immune to LET = 43MeV·cm2/mg

    • SET Characterized to LET = 43MeV·cm2/mg

  • Space Enhanced Plastic

    • Controlled Baseline

    • One Assembly/Test Site

    • One Fabrication Site

    • Extended Product Life Cycle

    • Product Traceability

  • Low propagation delay: 2.5ns
  • Low overdrive dispersion: 700ps
  • High toggle frequency: 325MHz
  • Narrow pulse width detection capability: 1.5ns
  • Input common-mode range extends 200mV beyond both rails
  • Supply range: 2.4V to 5.5V
  • Adjustable hysteresis control
  • Output latch capability

  • VID V62/22606-01XE

  • Radiation - Total Ionizing Dose (TID)

    • TID Characterized to 30krad (Si)

    • ELDRS-Free to 30krad (Si)

    • RHA/RLAT to 30krad (Si)

  • Radiation - Single-Event Effects (SEE)

    • SEL Immune to LET = 43MeV·cm2/mg

    • SET Characterized to LET = 43MeV·cm2/mg

  • Space Enhanced Plastic

    • Controlled Baseline

    • One Assembly/Test Site

    • One Fabrication Site

    • Extended Product Life Cycle

    • Product Traceability

  • Low propagation delay: 2.5ns
  • Low overdrive dispersion: 700ps
  • High toggle frequency: 325MHz
  • Narrow pulse width detection capability: 1.5ns
  • Input common-mode range extends 200mV beyond both rails
  • Supply range: 2.4V to 5.5V
  • Adjustable hysteresis control
  • Output latch capability

The TLV1H103-SEP is a 325MHz, high speed comparator with rail-to-rail inputs and a propagation delay of 2.5ns. The combination of fast response and wide operating voltage range make the comparator an excellent choice for narrow signal pulse detection and data and clock recovery applications in radar imaging and communications payload systems.

The push-pull (single-ended) outputs of the TLV1H103-SEP simplify and save cost on board-to-board wiring for I/O interfaces while reducing power consumption when compared to alternative high-speed differential output comparators. In addition, the TLV1H103-SEP offers the features such as adjustable hysteresis control and output latch capability. The comparator can directly interface most prevailing digital controllers and IO expanders in the downstream.

The TLV1H103-SEP uses a high-speed complementary BiCMOS process and is available in a 6-pin, SOT-23 package.

The TLV1H103-SEP is a 325MHz, high speed comparator with rail-to-rail inputs and a propagation delay of 2.5ns. The combination of fast response and wide operating voltage range make the comparator an excellent choice for narrow signal pulse detection and data and clock recovery applications in radar imaging and communications payload systems.

The push-pull (single-ended) outputs of the TLV1H103-SEP simplify and save cost on board-to-board wiring for I/O interfaces while reducing power consumption when compared to alternative high-speed differential output comparators. In addition, the TLV1H103-SEP offers the features such as adjustable hysteresis control and output latch capability. The comparator can directly interface most prevailing digital controllers and IO expanders in the downstream.

The TLV1H103-SEP uses a high-speed complementary BiCMOS process and is available in a 6-pin, SOT-23 package.
filter 尋找其它 比較器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 7
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TLV1H103-SEP Radiation Tolerant High-Speed Comparator with 2.5ns Propagation Delay datasheet PDF | HTML 2024/8/14
* 輻射及可靠性報告 TLV1H103-SEP Radiation Tolerant High-Speed Comparator TID Report (Rev. B) 2024/8/14
* 輻射及可靠性報告 TLV1H103-SEP Production Flow and Reliability Report PDF | HTML 2024/8/12
* 輻射及可靠性報告 TLV1H103-SEP Neutron Displacement Damage (NDD) Characterization Report 2024/4/29
* 輻射及可靠性報告 TLV1H103-SEP Single-Event Effects (SEE) Radiation Report PDF | HTML 2024/4/26
* VID TLV1H103-SEP VID V62/22606 2024/12/16
證書 HS-COMPARATOR-EVM EU Declaration of Conformity (DoC) 2024/4/8

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

HS-COMPARATOR-EVM — 採用 SOT-23 (DBV) 封裝的高速比較器評估模組

HS-COMPARATOR-EVM 是一款評估板，專門用於評估採用 5 針腳和 6 針腳 SOT-23 (DBV) 封裝的高速單路比較器，例如 TLV3601 和 TLV1H103。評估板內含配置選項，可簡化採用不同量測工具的計時性能評估。輸出允許直接連接至 50Ω 端接的示波器。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TLV1H103-SEP PSpice Model

SNOM799.ZIP (269 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV1H103-SEP TINA-TI Model

SNOM798.ZIP (0 KB) - TINA-TI Spice 模型
支援產品和硬體
參考設計

TIDA-010931 — 抗輻射航太電池管理系統 (BMS) 參考設計

此參考設計展示航太級電池管理系統。電路可量測串聯的八顆電池芯，以監控電池健康狀態、充電狀態與溫度。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-23 (DBV) 6 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片