首頁 放大器 比較器
首頁
放大器
比較器

TLV1805

現行

具有推挽輸出和關機功能的高電壓比較器

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同，但針腳輸出與所比較的裝置不同。
TLV1811 現行 具有推挽輸出的單通道微功耗高電壓比較器 Wider supply voltage, lower offset voltage, and lower Iq

TLV1805

現行
立即訂購

產品詳細資料

Number of channels 1 Output type Push-Pull Propagation delay time (µs) 0.25 Vs (max) (V) 40 Vs (min) (V) 3.3 Rating Catalog Features Hysteresis, POR, Shutdown Iq per channel (typ) (mA) 0.15 Vos (offset voltage at 25°C) (max) (mV) 4.5 Rail-to-rail In Operating temperature range (°C) -40 to 125 Input bias current (±) (max) (nA) 0.5 VICR (max) (V) 0 VICR (min) (V) 0
Number of channels 1 Output type Push-Pull Propagation delay time (µs) 0.25 Vs (max) (V) 40 Vs (min) (V) 3.3 Rating Catalog Features Hysteresis, POR, Shutdown Iq per channel (typ) (mA) 0.15 Vos (offset voltage at 25°C) (max) (mV) 4.5 Rail-to-rail In Operating temperature range (°C) -40 to 125 Input bias current (±) (max) (nA) 0.5 VICR (max) (V) 0 VICR (min) (V) 0
SOT-23 (DBV) 6 8.12 mm² (2.9 mm × 2.8 mm)
  • 3.3 V to 40 V supply range
  • Low quiescent current: 135 µA
  • High peak current push-pull output
  • Rail-to-rail inputs with phase reversal protection
  • Built-In hysteresis: 14mV
  • 250ns propagation delay
  • Low input offset voltage: 500 µV
  • Shutdown with high-z output
  • Power-On Reset (POR)
  • SOT-23-6 package
  • 3.3 V to 40 V supply range
  • Low quiescent current: 135 µA
  • High peak current push-pull output
  • Rail-to-rail inputs with phase reversal protection
  • Built-In hysteresis: 14mV
  • 250ns propagation delay
  • Low input offset voltage: 500 µV
  • Shutdown with high-z output
  • Power-On Reset (POR)
  • SOT-23-6 package

The TLV1805 high voltage comparator offers the unique combination of wide supply range, push-pull output, rail-to-rail inputs, low quiescent current, shutdown capability and fast output response. All these features make this comparator well-suited for applications that require sensing at the positive or negative voltage rails such as reverse current protection for a smart diode controller, overcurrent sensing, and overvoltage protection circuits where the push-pull output stage is used to drive the gate of a p-channel or n-channel MOSFET switch.

The high peak current push-pull output stage, which is unique for high-voltage comparators, offers the advantage of allowing the output to actively drive the load to either supply rail with a fast edge rate. This is especially valuable in applications where a MOSFET gate needs to be driven high or low quickly in order to connect or disconnect a host from an unexpected high voltage supply. Additional features such as low input offset voltage, low input bias currents and High-Z shutdown make the TLV1805 flexible enough to handle a broad range of applications. Power-On reset prevents false outputs at power-up.

The TLV1805 is in a 6-pin SOT-23 package and is specified for operation across the extended industrial temperature range of –40°C to +125°C.

The TLV1805 high voltage comparator offers the unique combination of wide supply range, push-pull output, rail-to-rail inputs, low quiescent current, shutdown capability and fast output response. All these features make this comparator well-suited for applications that require sensing at the positive or negative voltage rails such as reverse current protection for a smart diode controller, overcurrent sensing, and overvoltage protection circuits where the push-pull output stage is used to drive the gate of a p-channel or n-channel MOSFET switch.

The high peak current push-pull output stage, which is unique for high-voltage comparators, offers the advantage of allowing the output to actively drive the load to either supply rail with a fast edge rate. This is especially valuable in applications where a MOSFET gate needs to be driven high or low quickly in order to connect or disconnect a host from an unexpected high voltage supply. Additional features such as low input offset voltage, low input bias currents and High-Z shutdown make the TLV1805 flexible enough to handle a broad range of applications. Power-On reset prevents false outputs at power-up.

The TLV1805 is in a 6-pin SOT-23 package and is specified for operation across the extended industrial temperature range of –40°C to +125°C.
filter 尋找其它 比較器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 6
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TLV1805 40V, Rail-to-Rail Input, Push-Pull Output, High Voltage Comparator with Shutdown datasheet (Rev. A) PDF | HTML 2020/1/30
Application brief High Speed Current Sensing for Data Center mCRPS Standards PDF | HTML 2026/4/7
Product overview Implementing SAE JI772 Pilot Wire System in EV Charging Station With Comparators PDF | HTML 2024/4/5
應用說明 Overcurrent latch circuit PDF | HTML 2019/8/9
應用說明 Using Comparators in Reverse Current Applications (Rev. A) 2019/6/11
Application brief Overvoltage protection with comparator circuit PDF | HTML 2019/1/17

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

AMP-PDK-EVM — 放大器性能開發套件評估模組

放大器性能開發套件 (PDK) 是一款評估模組 (EVM) 套件，可測試通用運算放大器 (op amp) 參數，並與大多數運算放大器和比較器相容。EVM 套件提供主板和多個插槽式子卡選項，可滿足封裝需求，使工程師能夠快速評估和驗證裝置性能。

AMP-PDK-EVM 套件支援五種最熱門的業界標準封裝，包括：

  • D (SOIC-8 和 SOIC-14)
  • PW (TSSOP-14)
  • DGK (VSSOP-8)
  • DBV (SOT23-5 和 SOT23-6)
  • DCK (SC70-5 和 SC70-6)
使用指南: PDF | HTML
支援產品和硬體
模擬型號

Over-Current Protection with Latched Output

SNOM675.ZIP (8 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

TLV1805 PSpice Model

SNOM764.ZIP (51 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV1805 TINA-TI Reference Design

SNVMBP4.ZIP (8 KB) - TINA-TI 參考設計
支援產品和硬體
設計工具

CIRCUIT060079 — 具有比較器電路的過電壓保護

此過電壓防護電路使用含推挽輸出級的高電壓比較器，控制將電源連接至負載的 P 通道 MOSFET。當供應電壓超過過電壓閾值 (VOVER) 時，比較器的輸出會變高，並開啟 P 通道 MOSFET 斷開電源的負載。同樣的，當供應電壓低於 VOVER 時，比較器的輸出為 LOW，並將負載連接至 SUPPLY。
支援產品和硬體
設計工具

CIRCUIT060086 — 具有比較器電路的 ORing MOSFET 控制器

比較器可用於 ORing 配置中選擇不同的來源。有了相對簡單的電路和智慧型開關，可使用比較器來隨時維持負載的供應電壓。在低電壓應用中，比較器在二極體上擁有更出色的邊緣，因為沒有壓降。此電路設計用於連接到附帶備用電池的牆上插座的系統。如果主電源被切斷，備用電池將爲負載供電，以確保設備始終處於開啟狀態。電路左側的交換網路用於建立 LDO 輸出模型。
支援產品和硬體
參考設計

TIDA-010239 — AC Level 2 充電器平台參考設計

Electric vehicle supply equipment (EVSE) facilitates power delivery to electric vehicles safely from the grid. An EVSE control system consists of an auxiliary power stage, an off-board AC/DC high-power stage (only in DC charging stations), energy metering unit, AC and DC residual current detector, (...)

支援產品和硬體
參考設計

TIDA-010939 — 電動車供電設備前端控制器參考設計

此參考設計為電動車供電設備 (EVSE) 前端控制器，可做為 EV 充電程序的中央通訊模組使用。此設計支援 AC 和各種全球 DC 充電標準，包括組合充電系統 (CCS)、Guobiao/Tuijian (GB/T) 以及 Charge de Move (CHAdeMO)。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-23 (DBV) 6 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片