首頁 電源管理 LED 驅動器 汽車 LED 驅動器
首頁
電源管理
LED 驅動器
汽車 LED 驅動器

TLC6C5716-Q1

現行

汽車 16 通道完整診斷定電流 RGB LED 驅動器

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同，但針腳輸出與所比較的裝置不同。
最新 TLC69624-Q1 現行 車用、24 通道局部調光背光 LED 驅動器 Higher current, higher resolution, better thermal performance, more channels

TLC6C5716-Q1

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 16 Topology Current Sink Rating Automotive Operating temperature range (°C) -40 to 125 Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (min) (V) 0 Vout (max) (V) 7 Iout (max) (A) 0.8 Features Adjacent-Pin Short Detection, Fault Detection, Fault Diagnostic, LED Open Detection, LED Short to Ground Detection, LED Short to VLED Detection, LED Shorted Detection, LED Weak Supply Diagnostics, Reference Resistor Open or Short Detection, SPI Register Lock for Content Protection, Thermal Prewarning and Shutdown
Number of channels 16 Topology Current Sink Rating Automotive Operating temperature range (°C) -40 to 125 Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (min) (V) 0 Vout (max) (V) 7 Iout (max) (A) 0.8 Features Adjacent-Pin Short Detection, Fault Detection, Fault Diagnostic, LED Open Detection, LED Short to Ground Detection, LED Short to VLED Detection, LED Shorted Detection, LED Weak Supply Diagnostics, Reference Resistor Open or Short Detection, SPI Register Lock for Content Protection, Thermal Prewarning and Shutdown
HTSSOP (DAP) 38 101.25 mm² (12.5 mm × 8.1 mm)
  • AEC-Q100 Qualified for Automotive Applications
    • Device Temperature Grade 1: –40°C to 125°C, TA
  • 16 Constant-Current-Sink Output Channels
    • 50-mA Maximum Output Current
    • 8-V Maximum Output Voltage
    • Two Output Groups: OUTRn, OUTBn
  • Output Current Adjustment
    • 7-Bit Dot Correction (DC) for Each Channel
    • 8-Bit Brightness Control (BC) for Each Group
  • Integrated PWM Grayscale Generator
    • PWM Dimming for Each Individual Channel
    • Adjustable Global Grayscale Mode: 12-Bit, 10-Bit, 8-Bit
  • Protection and Diagnostics
    • LED-Open Detection (LOD), LED-Short Detection (LSD), Output Short-to-GND Detection (OSD)
    • Adjacent-Pin Short (APS) Detection
    • Pre-Thermal Warning (PTW), Thermal Shutdown (TSD)
    • IREF Resistor Open- (IOF) and Short-Detection (ISF) and -Protection
    • Negate Bit Toggle for GCLK Error Detect and LOD_LSD Register Error Check
    • LOD_LSD Circuit Self-Test
  • Programmable Output Slew Rate
  • Output Channel Group Delay
  • Serial Data Interface
  • AEC-Q100 Qualified for Automotive Applications
    • Device Temperature Grade 1: –40°C to 125°C, TA
  • 16 Constant-Current-Sink Output Channels
    • 50-mA Maximum Output Current
    • 8-V Maximum Output Voltage
    • Two Output Groups: OUTRn, OUTBn
  • Output Current Adjustment
    • 7-Bit Dot Correction (DC) for Each Channel
    • 8-Bit Brightness Control (BC) for Each Group
  • Integrated PWM Grayscale Generator
    • PWM Dimming for Each Individual Channel
    • Adjustable Global Grayscale Mode: 12-Bit, 10-Bit, 8-Bit
  • Protection and Diagnostics
    • LED-Open Detection (LOD), LED-Short Detection (LSD), Output Short-to-GND Detection (OSD)
    • Adjacent-Pin Short (APS) Detection
    • Pre-Thermal Warning (PTW), Thermal Shutdown (TSD)
    • IREF Resistor Open- (IOF) and Short-Detection (ISF) and -Protection
    • Negate Bit Toggle for GCLK Error Detect and LOD_LSD Register Error Check
    • LOD_LSD Circuit Self-Test
  • Programmable Output Slew Rate
  • Output Channel Group Delay
  • Serial Data Interface

There are automotive applications for indicators and for LCD local-dimming backlighting. For these applications, more persons think multi-channel constant-current LED drivers are necessary. The requirement is to get the same intensity and color temperature of LEDs. For system-level safety, it is necessary that the LED drivers can sense faults.

The TLC6C5716-Q1 device is an automotive 16-channel constant-current RGB LED driver that can do tests on the LEDs. The TLC6C5716-Q1 device supplies a maximum of 50-mA output current set by an external resistor. The device has a 7-bit dot correction with two ranges for each output. The device also has an 8-bit intensity control for the outputs of each color group.

A 12-,10-, or 8-bit grayscale control adjusts the intensity of each output. The device has circuits that sense faults in the system, including LED faults, adjacent-pin short faults, reference-resistor faults, and more. A slew rate control has 2 positions for adjustment to get the largest decrease in system noise. There is an interval between the changes of output level from one LED group to a different one. This interval helps to decrease the starting electrical current. The SDI and SDO pins let more than one device be connected in series for control through 1 serial interface.

There are automotive applications for indicators and for LCD local-dimming backlighting. For these applications, more persons think multi-channel constant-current LED drivers are necessary. The requirement is to get the same intensity and color temperature of LEDs. For system-level safety, it is necessary that the LED drivers can sense faults.

The TLC6C5716-Q1 device is an automotive 16-channel constant-current RGB LED driver that can do tests on the LEDs. The TLC6C5716-Q1 device supplies a maximum of 50-mA output current set by an external resistor. The device has a 7-bit dot correction with two ranges for each output. The device also has an 8-bit intensity control for the outputs of each color group.

A 12-,10-, or 8-bit grayscale control adjusts the intensity of each output. The device has circuits that sense faults in the system, including LED faults, adjacent-pin short faults, reference-resistor faults, and more. A slew rate control has 2 positions for adjustment to get the largest decrease in system noise. There is an interval between the changes of output level from one LED group to a different one. This interval helps to decrease the starting electrical current. The SDI and SDO pins let more than one device be connected in series for control through 1 serial interface.
filter 尋找其它 汽車 LED 驅動器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但針腳輸出與所比較的裝置不同。
TLC6C5724-Q1 現行 汽車 24 通道完整診斷定電流 RGB LED 驅動器 TLC6C5724-Q1 and TLC6C5716-Q1 are hardware and software compatible

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TLC6C5716-Q1 Automotive 16-Channel, Full Diagnostics, Constant-Current LED Driver datasheet (Rev. A) PDF | HTML 2018/8/20
功能安全資訊 TLC6C5716-Q1 Functional Safety, FIT Rate, and Failure Mode Distribution PDF | HTML 2023/2/23

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TLC6C5716EVM — TLC6C5716-Q1 16 通道定電流 LED 驅動器評估模組

TLC6C5716EVM 的設計目的在透過 USB2ANY 通訊工具採用 TLC65716EVM GUI 進行控制。TLC6C5716EVM 可由具有 PC USB 埠的 micro-USB 電源供電。TLC6C5716EVM GUI 的設計目的在展示 TLC6C5716-Q1 的功能。
使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發模組 (EVM) 的 GUI

SLVC724 — TLC6C5716EVM GUI

支援產品和硬體
模擬型號

TLC6C5716-Q1 PSpice Transient Model

SLVMCI7.ZIP (170 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLC6C5716-Q1 Unencrypted PSpice Transient Model

SLVMCI8.ZIP (23 KB) - PSpice 模型
支援產品和硬體
參考設計

TIDA-020001 — 車用 144 區局部調光背光參考設計

本機調光背光參考設計可節省電力，延長液晶顯示器 (LCD) 的使用壽命，並透過高動態範圍 (HDR) 或局部調光技術強化汽車顯示器品質。七個多通道定電流 LED 驅動器，可透過脈衝寬度調變 (PWM) 導通時間和電流位準亮度配置，實現 144 區局部調光。單一序列介面允許以菊鏈方式連接 LED 驅動器，以進行亮度與配置編程。溫度與環境光感測器可感測周圍環境，以防止發生過熱情況，並根據環境亮度調整全域亮度。
支援產品和硬體
參考設計

TIDA-020010 — 具有 HMI 的車用 HVAC 控制參考設計

此參考設計提供符合成本效益的解決方案，用於暖氣，通風與空調 (HVAC) 人機介面 (HMI) 之應用。此參考設計結合了同步降壓式轉換器、有刷 DC 馬達 (BDC) 的多通道半橋馬達驅動器以及多通道發光二極體 (LED) 驅動器，此驅動器可根據環境光強度來設定 LED 光線強度，而環境光感測是經由光線感測器加以測量，此參考設計上的高壓側開關可驅動各種負載，多個霍爾感測器用於旋轉旋鈕的非接觸式測量，追蹤電壓調整器供電給非內建感測器，而多工器用來多路傳輸多個類比感測器輸出至微控制器類比數位轉換器 (ADC)。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (DAP) 38 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片