首頁 電源管理 LED 驅動器 RGB LED 驅動器

TLC59283

現行

具預充電 FET 的 16 通道定電流 LED 驅動器

產品詳細資料

Number of channels 16 LED current per channel (mA) 35 Vin (min) (V) 3 Vin (max) (V) 5.5 Features Constant current, Serial interface Operating temperature range (°C) -40 to 85 Rating Catalog
Number of channels 16 LED current per channel (mA) 35 Vin (min) (V) 3 Vin (max) (V) 5.5 Features Constant current, Serial interface Operating temperature range (°C) -40 to 85 Rating Catalog
VQFN (RGE) 24 16 mm² (4 mm × 4 mm) SSOP (DBQ) 24 51.9 mm² (8.65 mm × 6 mm)
  • 16-channel, constant-current sink output with on and off control
  • Constant-current sink capability: 35mA (VCC ≤ 3.6V), 45mA (VCC > 3.6V)
  • LED power-supply voltage: up to 10V
  • VCC = 3V to 5.5V
  • Constant-current accuracy:
    • Channel-to-channel: ±1.4% (typ), ±3% (max)
    • Device-to-device: ±2% (typ), ±4% (max)
  • CMOS logic level I/O
  • Data transfer rate: 35MHz
  • BLANK pulse width: 50ns
  • Pre-charge FET for ghosting reduction
  • Grouped switching delay for noise reduction
  • Operating temperature: –40°C to +85°C
  • 16-channel, constant-current sink output with on and off control
  • Constant-current sink capability: 35mA (VCC ≤ 3.6V), 45mA (VCC > 3.6V)
  • LED power-supply voltage: up to 10V
  • VCC = 3V to 5.5V
  • Constant-current accuracy:
    • Channel-to-channel: ±1.4% (typ), ±3% (max)
    • Device-to-device: ±2% (typ), ±4% (max)
  • CMOS logic level I/O
  • Data transfer rate: 35MHz
  • BLANK pulse width: 50ns
  • Pre-charge FET for ghosting reduction
  • Grouped switching delay for noise reduction
  • Operating temperature: –40°C to +85°C

The TLC59283 is a 16-channel, constant-current sink light-emitting diode (LED) driver. Each channel can be individually controlled with a simple serial communications protocol that is compatible with 3.3V or 5V CMOS logic levels, depending on the operating VCC. When the serial data buffer is loaded, a LAT rising edge transfers the data to the OUTn outputs. The BLANK pin can be used to turn off all OUTn outputs during power-on and output data latching to prevent unwanted image displays during these times. The constant-current value of all 16 channels is set by a single external resistor.

Each constant-current output has a pre-charge field-effect transistor (FET) that can reduce ghosting on the multiplexing (dynamic) drive LED display. Multiple TLC59283s can be cascaded together to control additional LEDs from the same processor.

The TLC59283 is a 16-channel, constant-current sink light-emitting diode (LED) driver. Each channel can be individually controlled with a simple serial communications protocol that is compatible with 3.3V or 5V CMOS logic levels, depending on the operating VCC. When the serial data buffer is loaded, a LAT rising edge transfers the data to the OUTn outputs. The BLANK pin can be used to turn off all OUTn outputs during power-on and output data latching to prevent unwanted image displays during these times. The constant-current value of all 16 channels is set by a single external resistor.

Each constant-current output has a pre-charge field-effect transistor (FET) that can reduce ghosting on the multiplexing (dynamic) drive LED display. Multiple TLC59283s can be cascaded together to control additional LEDs from the same processor.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 4
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 16-Channel, Constant-Current LED Driver With Pre-Charge FET datasheet (Rev. C) PDF | HTML 2023/11/3
應用說明 Improve TLC59283 Control Loop Stability for Appliance Application PDF | HTML 2023/10/27
白皮書 Common LED Functions and LED Driver Design Considerations 2020/9/21
應用說明 TLC59283 for LED Indication with Better Brightness Uniformity, Smaller Size 2019/7/1

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TLC59282EVM-118 — TLC59282 評估模組

The Texas Instruments TLC59282EVM-118 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TLC5928 16-Channel Constant Current LED Driver with 4-Channel Grouped Delay. The TLC59282 is capable of driving up to 45mA per channel when powered from a 5-V supply. The EVM is (...)

使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TLC59283 IBIS Model

SBVM180.ZIP (34 KB) - IBIS 模型
支援產品和硬體
參考設計

TIDA-010021 — 抗陽光且範圍廣泛 (1.6 公尺下 120° FoV) 的近距感測器參考設計

具有寬視野 (FoV) 的近距感測越來越受歡迎,也越來越重要,非常適合許多應用中的人員偵測。此參考設計採用光學飛時測距 (ToF) 技術,打造精巧且符合成本效益的近距感測器系統。配備三個外部 NIR LED 和一個光二極體的單個近距與測距感測器 AFE (OPT3101) 可覆蓋總角度數為 120° 的寬 FoV 範圍,並可輸出人員活動的準確距離。
支援產品和硬體
參考設計

TIDA-010077 — 適合機器人應用的障礙物、懸崖偵測和防卡住全功能參考設計

障礙物閃避、懸崖偵測、防止卡住和跟隨牆壁,都是機器人系統的必要功能。此參考設計使用光學飛時測距 (ToF) 技術,打造精巧且具成本效益的近距感測器系統,以實現這些功能。透過單一近距與距離感測類比前端 (AFE) (OPT3101)、三顆外部近紅外線 (NIR) LED 和一個光二極體解決通用 IR 解決方案對環境與物體顏色敏感的問題。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGE) 24 Ultra Librarian
SSOP (DBQ) 24 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片