THS4281
- Very Low Quiescent Current: 750 µA (at 5 V)
- Rail-to-Rail Input and Output:
- Common-Mode Input Voltage Extends
400 mV Beyond the Rails - Output Swings Within 150 mV From the Rails
- Common-Mode Input Voltage Extends
- Wide –3-dB Bandwidth at 5 V:
- 90 MHz at Gain = +1, 40 MHz at Gain = +2
- High Slew Rate: 35 V/µs
- Fast Settling Time (2-V Step):
- 78 ns to 0.1%
- 150 ns to 0.01%
- Low Distortion at Gain = +2, VO = 2-VPP, 5 V:
- –91 dBc at 100 kHz, –67 dBc at 1 MHz
- Input Offset Voltage: 2.5 mV (Max at +25°C)
- Output Current > 30 mA (10-Ω Load, 5 V)
- Low Voltage Noise of 12.5 nV/√Hz
- Supply Voltages: +2.7 V, 3 V, +5 V, ±5 V, +15 V
- Packages: SOT23, MSOP, and SOIC
- APPLICATIONS
- Portable/Battery-Powered Applications
- High Channel Count Systems
- ADC Buffer
- Active Filters
- Current Sensing
All other trademarks are the property of their respective owners.
Fabricated using the BiCom-II process, the THS4281 is a low-power, rail-to-rail input and output, voltage-feedback operational amplifier designed to operate over a wide power-supply range of 2.7-V to 15-V single supply, and ±1.35-V to ±7.5-V dual supply. Consuming only 750 µA with a unity gain bandwidth of 90 MHz and a high 35-V/µs slew rate, the THS4281 allows portable or other power-sensitive applications to realize high performance with minimal power. To ensure long battery life in portable applications, the quiescent current is trimmed to be less than 900 µA at +25°C, and 1 mA from –40°C to +85°C.
The THS4281 is a true single-supply amplifier with a specified common-mode input range of 400 mV beyond the rails. This allows for high-side current sensing applications without phase reversal concerns. Its output swings to within 40 mV from the rails with 10-kΩ loads, and 150 mV from the rails with 1-kΩ loads.
The THS4281 has a good 0.1% settling time of 78 ns, and 0.01% settling time of 150 ns. The low THD of –87 dBc at 100 kHz, coupled with a maximum offset voltage of less than 2.5 mV, makes the THS4281 a good match for high-resolution ADCs sampling less than 2 MSPS.
The THS4281 is offered in a space-saving SOT23-5 package, a small MSOP-8 package, and the industry standard SOIC-8 package.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | THS4281 Very Low-Power, High-Speed, Rail-to-Rail Input and Output Voltage-Feedback Operational Amplifier datasheet (Rev. B) | PDF | HTML | 2015/10/30 | ||
| 電子書 | The Signal e-book: A compendium of blog posts on op amp design topics | PDF | HTML | 2017/3/28 | |||
| 白皮書 | Voltage-reference impact on total harmonic distortion | 2016/8/1 | ||||
| 技術文章 | When to use an amplifier with rail-to-rail inputs – and what to watch out for | PDF | HTML | 2016/6/30 | |||
| 應用說明 | Low Power Input and Reference Driver Circuit for ADS8318 and ADS8319 | 2009/6/24 | ||||
| 類比設計期刊 | Designing for low distortion with high-speed op amps | 2005/3/2 | ||||
| 應用說明 | Noise Analysis for High Speed Op Amps (Rev. A) | 2005/1/17 | ||||
| 應用說明 | Voltage Feedback vs. Current Feedback Op Amps | 1998/11/30 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TIPD112 — 適用於多工器和步進輸入的資料採集、18 位元、1uS 全幅反應參考設計
This verified design is a high performance data acquisition system (DAQ) using an 18-bit SAR ADC, ADS8881 at a throughput of 1MSPS. This design has been optimized to provide 18-bit settling performance for a Full Scale Step Input signal, thus leading to excellent system linearity. Such an input (...)
TIPD113 — 10 kHz AC、35mW、18 位元、1 Msps 資料採集參考設計
This verified design is a high performance data acquisition system (DAQ) using an 18-bit SAR ADC, ADS8881 at a throughput of 1MSPS. This design has been optimized to provide the lowest power solution for a full scale input sine wave of 10 KHz. At a total power consumption of less than 35mW, this (...)
TIPD115 — 採用最低失真、最低雜訊最佳化設定的 18 位元、1 MSPS 資料採集參考設計
This verified design is a high performance data acquisition system (DAQ) using an 18-bit SAR ADC, ADS8881 at a throughput of 1MSPS. This design has been optimized to provide the lowest noise & distortion solution for a full scale input sinewave of 10 KHz. This leads to a maximum possible value (...)
TIPD149 — 實現最低失真與雜訊的功率最佳化 16 位元 1MSPS 資料擷取區塊參考設計
此 TI 驗證設計實現了高精準度、16 位元 1MSPS 資料擷取系統，適用於需要極低失真與雜訊之前端的應用（例如數位音訊）。該電路使用高性能連續漸近暫存器類比數位轉換器 (SAR ADC)，並經過最佳化，可在沒有過多功耗的情況下提供優異的動態性能。
TIPD169 — 16 位元 1 MSPS 多工處理資料採集參考設計
此設計適用於 DC 輸入的 16 位元 1MSPS 單端多工資料擷取系統 (DAQ)。該系統由 16 位元漸近法暫存器 (SAR) 類比轉數位轉換器 (ADC)、SAR ADC 驅動器、參考驅動器及多工器組成。此設計展示了最佳化單端 DAQ 的程序，以 1MSPS 取樣率實現快速穩定。
TIPD173 — 適用於單端多工應用的 16 位元 1 MSPS 資料採集參考設計
此 TI 精準驗證設計詳細說明了針對 16 位元、1MSPS 單端資料擷取 (DAQ) 區塊的系統化設計方法，該區塊經過最佳化，可為多工應用達成優異的穩定時間、功耗、靜態性能與動態性能。 此設計配備了 16 位元、高精準度、連續漸近暫存器 (SAR) 類比數位轉換器 (ADC)；低雜訊、低功耗與寬頻寬的 ADC 輸入驅動電路；以及極低漂移的 ADC 電壓參考與相應的參考輸入驅動電路。
此設計非常適合需要低延遲、多通道資料擷取以進行多重感測器測量（例如環境 [溫度、壓力等]、生物電位與功率測量）的應用。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| SOT-23 (DBV) | 5 | Ultra Librarian |
| VSSOP (DGK) | 8 | Ultra Librarian |