TCAN1473A-Q1
- AEC-Q100 Qualified for automotive applications
- Functional Safety-Capable
- Implements Signal Improvement Capability (SIC) as defined in ISO 11898-2:2024
- Actively improves bus signal by eliminating ringing and enhancing bit symmetry
- Backward compatible for use in classic CAN networks
- Wide input operational voltage range
- Supports classic CAN and CAN FD up to 8Mbps
- VIO level shifting supports: 1.7V to 5.5V
- Operating modes:
- Normal mode
- Silent mode
- Standby mode
- Low-power sleep mode supporting remote and local wake-up
- High-voltage INH output for system power control
- INH_MASK pin to keep INH disabled during spurious wake-up events
- Local wake-up support via the WAKE pin
- Sleep Wake Error (SWE) timer enables safe transition from standby mode to sleep mode in the event of a system power failure or software fault
- Allows for extended power-up time
- Defined behavior when unpowered
- Bus and IO terminals are high impedance
- Protection features:
- ±58V CAN bus fault tolerant
- Load dump support on VSUP
- IEC ESD protection
- Undervoltage protection
- Thermal shutdown protection
- TXD dominant state timeout (TXD DTO)
- Available in 14-pin leaded (SOT and SOIC) packages and leadless (VSON) package with wettable flanks for improved automated optical inspection (AOI) capability
The TCAN1473A-Q1 is a Controller Area Network (CAN) transceiver that meets the physical layer requirements of the ISO 11898-2:2024 CAN specification with Signal Improvement Capability (SIC) functionality. The device reduces signal ringing at dominant-to-recessive edges and enables higher throughput in complex network topologies. SIC allows applications to extract the real benefit of CAN Flexible Datarate (CAN FD) by operating at 2Mbps, 5Mbps, and 8Mbps, even in large networks with multiple unterminated stubs.
The TCAN1473A-Q1 allows for system-level reductions in battery current consumption by selectively enabling the various power supplies that can be present on a system via the INH output pin. This allows a low-current sleep state in which power is gated to all system components except for the TCAN1473A-Q1, while monitoring the CAN bus. When a wake-up event is detected, the TCAN1473A-Q1 initiates system start-up by driving INH high.
The TCAN1473A-Q1 features an SWE timer that enables a safe transition to Sleep mode after 4 minutes (tINACTIVE) of inactivity in Standby mode. This makes sure the device is transitioned to low-power Sleep mode if the MCU fails to transition the device to Normal mode.
The device is pin compatible with classical CAN FD transceivers, such as TCAN1043A-Q1 or TCAN1043H-Q1 when INH_MASK feature is not used (INH_MASK pin is left floating or connected to GND).
您可能會感興趣的類似產品
針腳對針腳的功能與所比較的裝置相同。
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TCAN1473A-Q1 Automotive Signal Improvement Capable CAN FD Transceiver With Sleep Mode datasheet (Rev. A) | PDF | HTML | 2025/12/22 | ||
| 應用說明 | Comparison of CAN, CAN FD, and CAN XL | PDF | HTML | 2026/6/18 | |||
| 功能安全資訊 | TCAN1473A-Q1 Functional Safety FIT Rate, FMD and Pin FMA | PDF | HTML | 2024/10/8 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TCAN-SOIC14-EVM — 通用 SOIC 14 針腳 CAN 評估模組
通用 SOIC 14 針腳 CAN 評估模組 (EVM) 為使用者提供評估所有 TI 14 針腳 CAN 收發器系列的能力。這款通用 14 針腳 CAN EVM 可透過填充收發器並在 EVM 上設定跨接器進行配置，並搭配所有 TI 14 針腳 CAN 收發器系列使用。
此 EVM 也具備 SIC 網路的配置面積，可透過使用者安裝的 J10 和 J11 連接至 CAN 匯流排線路。將 SIC 網路連接至 CANH 和 CANL 會在訊號中增加更多反射和振鈴，以模擬有雜訊的 CAN 匯流排。這可用於在雜訊較高的環境中測試收發器的可靠性。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-23-THN (DYY) | 14 | Ultra Librarian |
| SOIC (D) | 14 | Ultra Librarian |
| VSON (DMT) | 14 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。