TCA9543A

現行

具中斷、重設和電壓轉換的 2 通道 1.65- 至 5.5-V I2C/SMBus 開關

立即訂購

產品規格表

document-pdfAcrobat TCA9543A Low Voltage 2-Channel I2C Bus Switch With Interrupt Logic And Reset datasheet (Rev. B) (英文) PDF | HTML

TCA9543A

現行

產品規格表

立即訂購

產品詳細資料

Addresses

4

Features

Interrupt pin, Reset pin

Rating

Catalog

Frequency (max) (MHz)

0.4

Operating temperature range (°C)

-40 to 85

Number of channels

2

Addresses

4

Features

Interrupt pin, Reset pin

Rating

Catalog

Frequency (max) (MHz)

0.4

Operating temperature range (°C)

-40 to 85

Number of channels

2

SOIC (D)

14

51.9 mm² (8.65 mm × 6 mm)

TSSOP (PW)

14

32 mm² (5 mm × 6.4 mm)

1-of-2 Bidirectional Translating Switches
I²C Bus and SMBus Compatible
Two active-low interrupt inputs
Active-low interrupt output
Active-low reset input
Two address pins allowing up to four TCA9543A devices on the I²C bus
Channel selection via I²C bus, in any combination
Power-up with all switch channels deselected
Low R_ON switches
Allows voltage-level translation between
1.8-V, 2.5-V, 3.3-V, and 5-V buses
No glitch on power-up
Supports hot insertion
Low standby current
Operating power-supply voltage range of 1.65-V to 5.5-V
5.5-V Tolerant inputs
0 to 400-kHz Clock frequency
Latch-up Performance exceeds 100-mA Per JESD78
ESD Protection exceeds JESD 22
- 4000-V Human-body model (A114-A)
- 1500-V Charged-device model (C101)

1-of-2 Bidirectional Translating Switches
I²C Bus and SMBus Compatible
Two active-low interrupt inputs
Active-low interrupt output
Active-low reset input
Two address pins allowing up to four TCA9543A devices on the I²C bus
Channel selection via I²C bus, in any combination
Power-up with all switch channels deselected
Low R_ON switches
Allows voltage-level translation between
1.8-V, 2.5-V, 3.3-V, and 5-V buses
No glitch on power-up
Supports hot insertion
Low standby current
Operating power-supply voltage range of 1.65-V to 5.5-V
5.5-V Tolerant inputs
0 to 400-kHz Clock frequency
Latch-up Performance exceeds 100-mA Per JESD78
ESD Protection exceeds JESD 22
- 4000-V Human-body model (A114-A)
- 1500-V Charged-device model (C101)

The TCA9543A is a dual bidirectional translating switch controlled by the I²C bus. The SCL/SDA upstream pair fans out to two downstream pairs, or channels. Either individual SCn/SDn channel or both channels can be selected, determined by the contents of the programmable control register. Two interrupt inputs (INT1–INT0), one for each of the downstream pairs, are provided. One interrupt output (INT) acts as an AND of the two interrupt inputs.

An active-low reset (RESET) input allows the TCA9543A to recover from a situation where one of the downstream I²C buses is stuck in a low state. Pulling RESET low resets the I²C state machine and causes both of the channels to be deselected, as does the internal power-on reset function.

The pass gates of the switches are constructed such that the VCC terminal can be used to limit the maximum high voltage, which will be passed by the TCA9543A. This allows the use of different bus voltages on each pair, so that 1.8-V, 2.5-V, or 3.3-V parts can communicate with 5-V parts without any additional protection. External pull-up resistors pull the bus up to the desired voltage level for each channel. All I/O terminals are 5.5-V tolerant.

The TCA9543A is a dual bidirectional translating switch controlled by the I²C bus. The SCL/SDA upstream pair fans out to two downstream pairs, or channels. Either individual SCn/SDn channel or both channels can be selected, determined by the contents of the programmable control register. Two interrupt inputs (INT1–INT0), one for each of the downstream pairs, are provided. One interrupt output (INT) acts as an AND of the two interrupt inputs.

An active-low reset (RESET) input allows the TCA9543A to recover from a situation where one of the downstream I²C buses is stuck in a low state. Pulling RESET low resets the I²C state machine and causes both of the channels to be deselected, as does the internal power-on reset function.

The pass gates of the switches are constructed such that the VCC terminal can be used to limit the maximum high voltage, which will be passed by the TCA9543A. This allows the use of different bus voltages on each pair, so that 1.8-V, 2.5-V, or 3.3-V parts can communicate with 5-V parts without any additional protection. External pull-up resistors pull the bus up to the desired voltage level for each channel. All I/O terminals are 5.5-V tolerant.

filter

尋找其它 I2C & I3C 交換器與多工器

下載觀看有字幕稿的影片影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 9

重要文件	類型	標題	格式選項	日期
*	資料表	TCA9543A Low Voltage 2-Channel I2C Bus Switch With Interrupt Logic And Reset datasheet (Rev. B)	PDF \| HTML	2019/10/29
	Application brief	Best Practices: I2C Devices on an I3C Shared Bus	PDF \| HTML	2023/3/30
	應用說明	I2C Solutions for Hot Swap Applications (Rev. A)		2023/1/31
	應用說明	I2C Dynamic Addressing		2019/4/25
	應用說明	Choosing the Correct I2C Device for New Designs	PDF \| HTML	2016/9/7
	選擇指南	I2C Infographic Flyer		2015/12/3
	應用說明	Understanding the I2C Bus	PDF \| HTML	2015/6/30
	應用說明	Maximum Clock Frequency of I2C Bus Using Repeaters		2015/5/15
	應用說明	I2C Bus Pull-Up Resistor Calculation	PDF \| HTML	2015/2/13

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TCA9548AEVM — TCA9548A I2C 1 對 8 雙向轉換開關評估模組

TCA9548AEVM 旨在評估和演示 TI TCA954xA 系列 I2C 交換機的功能。TCA9548AEVM 可作為獨立評估模組與現有系統連接，或與 MSP430 Lauchpad 搭配使用，後者可作為 I2C 主控端及 TCA9548AEVM 的電源供應器。TCA9548AEVM 也配備多個跨接器，可進行調整以適應 5 種不同的德州儀器 I2C 開關：TCA9543A、TCA9544A、TCA9545A、TCA9546A 和 TCA9548A。通道數較低的裝置可單獨訂購，並放置在 TCA9548AEVM 上以進行評估。