首頁 介面 I2C、I3C 與 SPI IC I2C 與 SPI 通用 I/O (GPIO)
首頁
介面
I2C、I3C 與 SPI IC
I2C 與 SPI 通用 I/O (GPIO)

TCA6408A-Q1

現行

具中斷、重設和配置暫存器的車用 8 位元轉換 I2C/SMBus I/O 擴展器

立即訂購
產品規格表

TCA6408A-Q1

現行
產品規格表 立即訂購

產品詳細資料

Number of I/Os 8 Features Adjustable I/O level, Configuration registers, Interrupt pin, Reset pin Addresses 2 Rating Automotive Frequency (max) (MHz) 0.4 Operating temperature range (°C) -40 to 125
Number of I/Os 8 Features Adjustable I/O level, Configuration registers, Interrupt pin, Reset pin Addresses 2 Rating Automotive Frequency (max) (MHz) 0.4 Operating temperature range (°C) -40 to 125
TSSOP (PW) 16 32 mm² (5 mm × 6.4 mm)
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • I2C to parallel port expander
  • Operating power-supply voltage range of 1.65 V to 3.6 V
  • Allows bidirectional voltage-level translation and GPIO expansion between 1.8-, 2.5-, and 3.3-V I2C bus and P-ports
  • Low standby current consumption
  • 400-kHz Fast I2C Bus
  • Hardware address pin allows Two TCA6408A-Q1 devices on the same I2C/SMBus bus
  • Active-low reset ( RESET) input
  • Open-drain active-low interrupt ( INT) output
  • Input and output configuration register
  • Polarity inversion register
  • Internal power-on reset
  • Power up with all channels configured as inputs
  • No glitch on power up
  • Noise filter on SCL and SDA inputs
  • Latched outputs with high-current drive maximum capability for directly driving LEDs
  • Latch-up performance meets 100 mA per AEC Q100-004
  • Schmitt-Trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs
  • ESD protection
    • 2000-V Human body model (Q100-002)
    • 1000-V Charged-device model (Q100-011)
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • I2C to parallel port expander
  • Operating power-supply voltage range of 1.65 V to 3.6 V
  • Allows bidirectional voltage-level translation and GPIO expansion between 1.8-, 2.5-, and 3.3-V I2C bus and P-ports
  • Low standby current consumption
  • 400-kHz Fast I2C Bus
  • Hardware address pin allows Two TCA6408A-Q1 devices on the same I2C/SMBus bus
  • Active-low reset ( RESET) input
  • Open-drain active-low interrupt ( INT) output
  • Input and output configuration register
  • Polarity inversion register
  • Internal power-on reset
  • Power up with all channels configured as inputs
  • No glitch on power up
  • Noise filter on SCL and SDA inputs
  • Latched outputs with high-current drive maximum capability for directly driving LEDs
  • Latch-up performance meets 100 mA per AEC Q100-004
  • Schmitt-Trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs
  • ESD protection
    • 2000-V Human body model (Q100-002)
    • 1000-V Charged-device model (Q100-011)

The TCA6408A-Q1 is a 16-pin device that provides 8-bits of general purpose parallel input and output (I/O) expansion for the two-line bidirectional I2C bus (or SMBus) protocol. This device can operate with a power supply voltage ranging from 1.65 V to 3.6 V on both the I2C bus side (VCCI) and on the P-port side (VCCP). This allows the TCA6408A-Q1 to interface with next-generation microprocessors and microcontrollers on the SDA/SCL side, where supply levels are dropping down to conserve power. In contrast to the dropping power supplies of microprocessors and microcontrollers, some PCB components such as LEDs remain at a higher power supply.

The device supports both 100-kHz (Standard-mode) and 400-kHz (Fast-mode) clock frequencies. I/O expanders such as the TCA6408A-Q1 provide a simple solution when additional I/Os are needed for switches, sensors, push-buttons, LEDs, fans, and so forth.

The TCA6408A-Q1 is a 16-pin device that provides 8-bits of general purpose parallel input and output (I/O) expansion for the two-line bidirectional I2C bus (or SMBus) protocol. This device can operate with a power supply voltage ranging from 1.65 V to 3.6 V on both the I2C bus side (VCCI) and on the P-port side (VCCP). This allows the TCA6408A-Q1 to interface with next-generation microprocessors and microcontrollers on the SDA/SCL side, where supply levels are dropping down to conserve power. In contrast to the dropping power supplies of microprocessors and microcontrollers, some PCB components such as LEDs remain at a higher power supply.

The device supports both 100-kHz (Standard-mode) and 400-kHz (Fast-mode) clock frequencies. I/O expanders such as the TCA6408A-Q1 provide a simple solution when additional I/Os are needed for switches, sensors, push-buttons, LEDs, fans, and so forth.
filter 尋找其它 I2C 與 SPI 通用 I/O (GPIO)
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但針腳輸出與所比較的裝置不同。
TCA9539-Q1 現行 具有中斷、重設和配置暫存器的汽車 16 位元 1.65 至 3.6-V I2C/SMBus I/O 擴展器 16-bit IO exapnder

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TCA6408A-Q1 Low-Voltage 8-Bit I2C and SMBus I/O Expander With Interrupt Output datasheet (Rev. A) PDF | HTML 2023/2/6
應用說明 Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A) PDF | HTML 2024/7/3
功能安全資訊 TCA6408A-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2020/10/29
應用說明 I2C Dynamic Addressing 2019/4/25

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

IO-EXPANDER-EVM — IO-EXPANDER-EVM：I2C 和 SMBus IO 擴展器評估模組

IO 擴展器評估模組 (EVM) 可讓您評估 TI 的 SMBus 與 I2C IO 擴展器線路裝置產品組合。TCA6424A 和 TCA9539 都安裝在電路板上。24 針腳 TSSOP 元件封裝還支援 TCA6408A、TCA6416A、TCA9534、TCA9534A、TCA9535、TCA9538, TCA9554、TCA9554A 和 TCA9555。

使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
韌體

SLVC564 — I/O Expander Software and Firmware Package

支援產品和硬體
模擬型號

TCA6408A IBIS Model

SCPM014.ZIP (107 KB) - IBIS 模型
支援產品和硬體
設計工具

I2C-DESIGNER — I2C 設計工具

使用 I2C 設計工具快速解決 I2C 設計中在定址、電壓位準和頻率方面的衝突。輸入主裝置和從屬裝置的參數，自動產生 I2C 樹狀結構，或輕鬆建置自訂解決方案。此工具將協助設計人員節省時間並符合 I2C 標準，提供關於偵錯缺失確認、選擇上拉電阻以及滿足 I2C 匯流排最大電容負載的指導。 
支援產品和硬體
參考設計

TIDA-020060 — 適用於 100/1000Base-T1 乙太網路應用的汽車數據線供電參考設計

此參考設計展現出汽車應用實例的數據線供電 (PoDL) 實作。此設計使用 DP83TG720S-Q1 1000MBit/s 單對乙太網路 (SPE) PHY，並可選擇切換至 DP83TC812S-Q1 SPE PHY 以進行 100MBit/s 運作。耦合和去耦合網路用於在 50W 的最大功率下耦合。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TSSOP (PW) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片