TCA5013
- Operating supply voltage range of 2.7 V to 5.5 V
- Supports EMV 4.3, ISO7816-3 and ISO7816-10 standards
- Supports 1 user card and 3 secure access module cards
- IEC61000-4-2 8-kV Contact discharge esd protection on all smartcard interface pins
- Low power mode for power saving when inactive (shutdown mode)
- Automatic card deactivation in the event of short circuit, card pull out, over temperature or power supply fault
- Integrated DC-DC boost to generate VCC for 5 V and 3 V on all card interfaces
- Automatic card clock generation for synchronous card activation
- 4-byte FIFO for storing ATR from ISO7816-10 Type 1 cards
- Programmable rise/fall time control for IO and clock lines of all smartcards
- Input clock frequency up to 26 MHz
- Tamper proof package design
TCA5013 is a smartcard interface IC that is targeted for use in Point of Sale (POS) terminals. The device enables POS terminals to interface with EMV4.3, ISO7816-3 and ISO7816-10 compliant cards. It supports up to 3 Secure Access Module (SAM) cards in addition to 1 user card. It operates from a single supply and generates all the card voltages. The device is controlled by a standard I2C interface and is capable of card activation and deactivation per EMV4.3 and ISO7816-3 standards. In addition it also supports ISO7816-10 synchronous cards. It has a 4-byte FIFO that stores the ATR (Answer to Reset) sequence in ISO7816-10 type 1 cards. Synchronous cards (ISO7816-10 type 1 and type 2) can be set up for automatic activation or manual activation. The device has multiple power saving modes and also supports power saving in the smartcard itself by “clock stop” or lowering clock frequency to lowest allowable levels per the ISO7816 - 3 standard. TCA5013 has IEC 61000-4-2 8kV contact discharge on all pins that interface with smartcards. This enables the system to be resistant to ESD in the field without the need for external ESD devices. It is available in an 5 mm x 5 mm BGA package. The pin out of the device is such that all the IO pins are securely surrounded by other pins. This prevents the secure pins from being probed during device operation.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TCA5013 Feature Rich Smartcard Interface IC with 1 User Card and 3 SAM Card Support datasheet (Rev. C) | PDF | HTML | 2019/9/24 | ||
| 應用說明 | Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A) | PDF | HTML | 2024/7/3 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TMDXEVM438X-EPOS — AM438x 電子銷售點 (EPOS) 評估模組
附註： 請注意，此 EVM 需要核准才能購買及取得軟體存取權。使用「立即訂購」表格中的「要求」按鈕提交要求。
TIDA-00382 — 智慧卡介面參考設計
TIDA-00382 TCA5013 參考設計解決了 EPOS 智慧卡子系統的問題；讓客戶可以更加輕鬆地通過 EMV 測試。 TCA5013 參考設計內建一個使用者卡插槽，可讓 TCA5013 偵測使用者卡的插入與移除。使用者卡（也稱為 IC 卡）包含使用電子銷售點 (EPOS) 之消費者的帳戶資訊。TCA5013 的設計還包含三個安全存取模組 (SAM) 卡盒。SAM 卡在外觀上類似於用戶識別模組 (SIM)，但包含與 EPOS 交易相關的資訊。
TIDA-00818 — 行動銷售點 (mPOS) 電源參考設計
TIDA-00818 是行動銷售點 (mPOS) 參考設計，採用 1S1P 鋰離子電池架構，可縮減系統尺寸和成本。整合式負載開關可減少待機耗電量，並盡可能延長電池壽命，實現單芯架構。也配備 USB Type-C 充電連接埠，可支援更高的功率傳輸，並大幅縮短充電時間。
TIDEP-0093 — 電子銷售點 (EPOS) 支付終端參考設計
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| NFBGA (ZAH) | 48 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。