首頁 音訊、觸覺和壓電 音訊放大器 車用音訊放大器
首頁
音訊、觸覺和壓電
音訊放大器
車用音訊放大器
最新

TAS6501-Q1

現行

具有負載突降的車用 2.1MHz、15W、單通道數位輸入 D 類音訊放大器

立即訂購
產品規格表

TAS6501-Q1

現行
產品規格表 立即訂購

產品詳細資料

Output power (W) 15 Power stage supply (max) (V) 19 Power stage supply (min) (V) 4.5 Speaker channels (max) Mono Audio input type Digital Input Control interface I2C THD + N at 1 kHz (%) 0.02 Sampling rate (max) (Hz) 192000 Rating Automotive Operating temperature range (°C) -40 to 125
Output power (W) 15 Power stage supply (max) (V) 19 Power stage supply (min) (V) 4.5 Speaker channels (max) Mono Audio input type Digital Input Control interface I2C THD + N at 1 kHz (%) 0.02 Sampling rate (max) (Hz) 192000 Rating Automotive Operating temperature range (°C) -40 to 125
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4 VQFN (RGE) 24 16 mm² 4 x 4
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, TA
  • General operation
    • 4.5V to 19V supply voltage, 40V load dump
    • Support for 1.8V and 3.3V I/O’s
    • I2C control with 8 address options
    • <0.5W idle power loss at 14.4V, <5uA max PVDD shutdown loss
  • Output current sensing via I2S or TDM
    • No need for external circuitry
  • Real-time load diagnostics
    • Monitor output conditions while playing audio
    • Open load, Shorted load, Short-to-power, Short-to-ground detection
  • Integrated DSP processing
    • Thermal monitoring and foldback
    • PVDD monitoring and foldback
    • Clip detection
    • Low Latency Path, >70% reduced signal delay at 48kHz
  • DC and AC Standby load diagnostics
  • Audio inputs
    • I2S and TDM support up to TDM16
    • Input sample rates: 16, 32, 44.1, 48, 96, 192kHz
  • Audio outputs
    • 384kHz to 2MHz configurable output switching frequency
    • 15W (14.4V, 4Ω, 10% THD+N)
  • Audio Performance
    • THD+N <0.02% (4Ω, 1W, 1kHz)
    • 105dB SNR
    • Output noise: 41µVRMS at 14.4V, A-weighting
  • Protection
    • Output short protection
    • Speaker GuardTM Pro power limiter
    • Configurable overtemperature warning and shutdown
    • I2C temperature and supply voltage readout
    • DC offset, undervoltage and overvoltage
  • Easily meet CISPR25-L5 EMC specification
    • Advanced spread-spectrum
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, TA
  • General operation
    • 4.5V to 19V supply voltage, 40V load dump
    • Support for 1.8V and 3.3V I/O’s
    • I2C control with 8 address options
    • <0.5W idle power loss at 14.4V, <5uA max PVDD shutdown loss
  • Output current sensing via I2S or TDM
    • No need for external circuitry
  • Real-time load diagnostics
    • Monitor output conditions while playing audio
    • Open load, Shorted load, Short-to-power, Short-to-ground detection
  • Integrated DSP processing
    • Thermal monitoring and foldback
    • PVDD monitoring and foldback
    • Clip detection
    • Low Latency Path, >70% reduced signal delay at 48kHz
  • DC and AC Standby load diagnostics
  • Audio inputs
    • I2S and TDM support up to TDM16
    • Input sample rates: 16, 32, 44.1, 48, 96, 192kHz
  • Audio outputs
    • 384kHz to 2MHz configurable output switching frequency
    • 15W (14.4V, 4Ω, 10% THD+N)
  • Audio Performance
    • THD+N <0.02% (4Ω, 1W, 1kHz)
    • 105dB SNR
    • Output noise: 41µVRMS at 14.4V, A-weighting
  • Protection
    • Output short protection
    • Speaker GuardTM Pro power limiter
    • Configurable overtemperature warning and shutdown
    • I2C temperature and supply voltage readout
    • DC offset, undervoltage and overvoltage
  • Easily meet CISPR25-L5 EMC specification
    • Advanced spread-spectrum

The TAS6501-Q1 is a mono-channel, digital-input, Class-D audio amplifier that supports 2MHz switching frequency enabling a cost and size-optimized single-channel audio amplifier design. The device operates from 4.5V to 19V and delivers up to 15W (14.4V, 4Ω, 10% THD+N). The device integrates DC and AC load diagnostics to determine the status of the connected load before enabling the output stage. Additionally, the device can monitor the output load condition while in PLAY mode with or without audio using real-time load diagnostics which operates independently from the host and audio input.

TAS6501-Q1 can monitor the output current, PVDD voltage, and temperature of the device and can report this data through TDM or I2S. The integrated DSP of the TAS6501-Q1 enables advanced protection features such as PVDD foldback, thermal foldback, and Speaker Guard™ Pro power limiter. The DSP also enables an additional low-latency signal path, providing up to 70% faster signal processing at 48kHz for time-sensitive Active Noise Cancellation (ANC) and Road Noise Cancellation (RNC) applications.

The device is available in a small pad-down TSSOP and QFN with wettable flanks packages, enabling a heatsink-free audio amplifier design.

The TAS6501-Q1 is a mono-channel, digital-input, Class-D audio amplifier that supports 2MHz switching frequency enabling a cost and size-optimized single-channel audio amplifier design. The device operates from 4.5V to 19V and delivers up to 15W (14.4V, 4Ω, 10% THD+N). The device integrates DC and AC load diagnostics to determine the status of the connected load before enabling the output stage. Additionally, the device can monitor the output load condition while in PLAY mode with or without audio using real-time load diagnostics which operates independently from the host and audio input.

TAS6501-Q1 can monitor the output current, PVDD voltage, and temperature of the device and can report this data through TDM or I2S. The integrated DSP of the TAS6501-Q1 enables advanced protection features such as PVDD foldback, thermal foldback, and Speaker Guard™ Pro power limiter. The DSP also enables an additional low-latency signal path, providing up to 70% faster signal processing at 48kHz for time-sensitive Active Noise Cancellation (ANC) and Road Noise Cancellation (RNC) applications.

The device is available in a small pad-down TSSOP and QFN with wettable flanks packages, enabling a heatsink-free audio amplifier design.

filter 尋找其它 車用音訊放大器
下載 觀看有字幕稿的影片 影片

索取更多資訊

提供其他細部設計資源。立即索取

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet TAS6501-Q1 , 15W, 2MHz Digital Input 1-Channel Automotive Heatsink-Free Class-D Audio Amplifier with Current Sense and Real-time Load Diagnostics datasheet PDF | HTML 2025年 9月 17日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TAS6501Q1EVM — TAS6501-Q1 評估模組

TAS65x1-Q1 評估模組 (EVM) 展示了具有整合式數位訊號處理 (DSP) 的 TAS6511-Q1 和 TAS6501-Q1 單通道 D 類放大器的所有特性。名為 PurePath™ Console 的圖形使用者介面 (GUI) 用於透過 USB 連接至 EVM。該 EVM 具有光纖和同軸 SPDIF 輸入、I2S、TDM 和透過 USB 介面的音訊輸入。
View Options
開發板

TAS6511Q1EVM — TAS6511-Q1 評估模組

TAS6511-Q1 評估模組 (EVM) 展示了具有整合 DSP 的 TAS6511-Q1 單通道 D 類放大器的所有特性。使用 PurePath™ Console 3 圖形使用者介面 (GUI) 來透過 USB 介接至 EVM。該 EVM 具有光纖和同軸 SPDIF 輸入、I2S、TDM 和透過 USB 介面的音訊輸入。
View Options
支援軟體

TAS6501-Q1-DESIGN — TAS6501-Q1 technical documentation

TAS6501-Q1 technical documentation
支援產品和硬體

支援產品和硬體

產品
車用音訊放大器
  • TAS6501-Q1 — 具有負載突降的車用 2.1MHz、15W、單通道數位輸入 D 類音訊放大器
硬體開發
開發板
要求
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (PWP) 28 Ultra Librarian
VQFN (RGE) 24 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片