SN74F543
- 3-State True Outputs
- Back-to-Back Registers for Storage
- Package Options Include Plastic Small-Outline and Shrink Small-Outline Packages and Standard Plastic 300-mil DIPs
The SN74F543 octal transceiver contains two sets of D-type latches
for temporary storage of data flowing in either direction. Separate
latch-enable (
or 
) and output enable (
or 
) inputs are provided for each register to permit
independent control in either direction of data flow. The A outputs
are characterized to sink 24 mA while the B outputs are characterized
to sink 64 mA.
The A-to-B enable (
)
input must be low in order to enter data from A or to output data
from B. Having low and low makes the A-to-B latches
transparent; a subsequent low-to-high transition of puts the A latches in the storage
mode. With and both low, the 3-state B outputs
are active and reflect the data present at the output of the A
latches. Data flow from B to A is similar, but requires using the
, , and inputs.
The SN74F543 is available in TI's shrink small-outline package (DB), which provides the same I/O pin count and functionality of standard small-outline packages in less than half the printed-circuit-board area.
The SN74F543 is characterized for operation from 0°C to 70°C.
A-to-B data flow is shown; B-to-A flow control is the same
except that it uses ,
, and .
Output level before the indicated steady-state input conditions were established.
您可能會感興趣的類似產品
針腳對針腳的功能與所比較的裝置相同。
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | Octal Registered Transceiver With 3-State Outputs datasheet (Rev. B) | 1993/10/1 |