SN65LVDS31-EP

現行

強化型產品四 LVDS 發射器

產品詳細資料

Function Driver Protocols LVDS Number of transmitters 4 Number of receivers 0 Signaling rate (Mbps) 400 Input signal LVTTL Output signal LVDS Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125
Function Driver Protocols LVDS Number of transmitters 4 Number of receivers 0 Signaling rate (Mbps) 400 Input signal LVTTL Output signal LVDS Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125
SOIC (D) 16 59.4 mm² (9.9 mm × 6 mm)
  • Meet or Exceed the Requirements of ANSI TIA/EIA-644 Standard
  • Low-Voltage Differential Signaling With Typical Output Voltage of 350 mV and 100-Ω Load
  • Typical Output Voltage Rise and Fall Times of 500 ps (400 Mbps)
  • Typical Propagation Delay Times of 1.7 ns
  • Operate From a Single 3.3-V Supply
  • Power Dissipation 25 mW Typical Per Driver at 200 MHz
  • Driver at High Impedance When Disabled or With VCC = 0
  • Bus-Terminal ESD Protection Exceeds 8 kV
  • Low-Voltage TTL (LVTTL) Logic Input Levels
  • Pin Compatible With AM26LS31, MC3487, and µA9638
  • Cold Sparing for Space and High Reliability Applications Requiring Redundancy
  • Meet or Exceed the Requirements of ANSI TIA/EIA-644 Standard
  • Low-Voltage Differential Signaling With Typical Output Voltage of 350 mV and 100-Ω Load
  • Typical Output Voltage Rise and Fall Times of 500 ps (400 Mbps)
  • Typical Propagation Delay Times of 1.7 ns
  • Operate From a Single 3.3-V Supply
  • Power Dissipation 25 mW Typical Per Driver at 200 MHz
  • Driver at High Impedance When Disabled or With VCC = 0
  • Bus-Terminal ESD Protection Exceeds 8 kV
  • Low-Voltage TTL (LVTTL) Logic Input Levels
  • Pin Compatible With AM26LS31, MC3487, and µA9638
  • Cold Sparing for Space and High Reliability Applications Requiring Redundancy

The SN65LVDS31 is a differential line driver that implements the electrical characteristics of low-voltage differential signaling (LVDS). This signaling technique lowers the output voltage levels of 5-V differential standard levels (such as TIA/EIA-422B) to reduce the power, increase the switching speeds, and allow operation with a 3.3-V supply rail. This driver will deliver a minimum differential output voltage magnitude of 247 mV into a 100-Ω load when enabled.

The intended application of this device and signaling technique is both point-to-point and multidrop (one driver and multiple receivers) data transmission over controlled impedance media of approximately 100 Ω. The transmission media may be printed-circuit board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

The SN65LVDS31 is characterized for operation from –55°C to 125°C.

The SN65LVDS31 is a differential line driver that implements the electrical characteristics of low-voltage differential signaling (LVDS). This signaling technique lowers the output voltage levels of 5-V differential standard levels (such as TIA/EIA-422B) to reduce the power, increase the switching speeds, and allow operation with a 3.3-V supply rail. This driver will deliver a minimum differential output voltage magnitude of 247 mV into a 100-Ω load when enabled.

The intended application of this device and signaling technique is both point-to-point and multidrop (one driver and multiple receivers) data transmission over controlled impedance media of approximately 100 Ω. The transmission media may be printed-circuit board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

The SN65LVDS31 is characterized for operation from –55°C to 125°C.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
SN65LVDS33-EP 現行 強化型產品高速差動接收器 Line Receiver variant

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 6
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 SN65LVDS31-EP High-Speed Differential Line Drivers datasheet 2011/9/22
* 輻射及可靠性報告 SN65LVDS31MDREP Reliability Report 2013/1/7
* VID SN65LVDS31-EP VID V6207627 2016/6/21
Application brief LVDS to Improve EMC in Motor Drives 2018/9/27
Application brief How Far, How Fast Can You Operate LVDS Drivers and Receivers? 2018/8/3
Application brief How to Terminate LVDS Connections with DC and AC Coupling 2018/5/16

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

AWRL1432BOOST-BSD — 適用於盲點偵測的 AWRL1432 單晶片 mmWave 感測器評估板

AWRL1432BOOST-BSD 是一款易於使用的 70GHz mmWave 感測器評估套件,以具有板載 ROGERS RO3003 高性能天線的 AWRL1432 裝置為基礎。此電路板可存取點雲資料及 USB 供電介面。AWRL1432BOOST-BSD 支援與 DCA1000EVM 開發套件直接連接。AWRL1432BOOST-BSD 也具有適用於汽車應用的 12V 供電 TCAN4550。

此套件受 mmWave 工具、示範與軟體支援,包括 mmWave 軟體開發套件 (mmwave_mcuplus_sdk) 和 TI 的 Code Composer Studio (...)

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

AWRL6432BOOST — 用於單晶片、低功耗 mmWave 雷達感測器的 AWRL6432BOOST BoosterPack™ 評估模組

AWRL6432BOOST 是一款易於使用的 60GHz mmWave 感測器評估套件,適用於具有 FR4 型天線的 AWRL6432 裝置。此電路板可存取點雲資料及 USB 供電介面。

AWRL6432BOOST 支援與 DCA1000EVM 直接連接。此 ‌BoosterPack 由 mmWave 工具、示範和軟體支援,包括 mmWave 軟體開發套件 (MMWAVE-L-SDK) 和 Code Composer Studio™ 整合式開發環境 (IDE) (CCSTUDIO)。

可使用其他電路板來啟用其他功能。例如 DCA1000EVM 可存取感測器原始類比轉數位 (ADC) (...)

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

IWRL1432BOOST-BSD — 具有低功率 76-GHz 至 81-GHz 工業雷達感測器且適用於 BSD 的 IWRL1432 評估模組

IWRL1432BOOST-BSD 是一款易於使用的 77GHz mmWave 感測器評估套件,以具有板載 ROGERS RO3003 高性能天線的 IWRL1432 裝置為基礎。此電路板可存取點雲資料及 USB 供電介面。IWRL1432BOOST-BSD 還具有一個 12V 操作的 TCAN4550,適用於需要此介面的應用。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

IWRL6432BOOST — 適用於單晶片 60GHz mmWave 低功耗感測器的 IWRL6432 BoosterPack™評估模組

IWRL6432BOOST 是一款易於使用的 60GHz mmWave 感測器評估套件,以具有板載 FR4 型天線的 IWRL6432 裝置為基礎。此電路板可存取點雲資料及 USB 供電介面。IWRL6432BOOST 支援與 DCA1000EVM 開發套件直接連接。

此套件由 mmWave 工具、示範和軟體支援,包括 mmWave 軟體開發套件 (MMWAVE-L-SDK) 和 Code Composer Studio™ 整合式開發環境 (IDE) (CCSTUDIO)。

可使用其他電路板來啟用其他功能。例如 DCA1000EVM 可存取感測器的原始類比轉數位 (ADC) 資料擷取。板載 (...)

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

SN65LVDS31-32BEVM — 適用 LVDS31 和 LVDS32B 的 SN65LVDS31-32B 低電壓差動訊號評估模組

TI offers a series of low-voltage differential signaling (LVDS) evaluation modules (EVMs) designed for analysis of the electrical characteristics of LVDS drivers and receivers. Four unique EVMs are available to evaluate the different classes of LVDS devices offered by TI.

Combination Table

As seen (...)

支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

SN65LVDS31-32EVM — 適用 SNx5LVDS31 和 SNx5LVDS32 的 SN65LVDS31-32EVM 評估模組

The SN65LVDS31-32EVM evaluation moduel (EVM) includes the SV65LVDS31 quad driver and the SN65LVDS32 quad receiver. The SN65LVDS31 device is a TIA/EIA-644 standard-compliant LVDS driver. The SN65LVDS32 device is a TIA/EIA-644 standard-compliant receiver that has a passive open-circuit failsafe (...)

支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

SN65LVDS31-33EVM — 適用 SN65LVDS31 和 SN65LVDS33 的評估模組

TI offers a series of low-voltage differential signaling (LVDS) evaluation modules (EVMs) designed for analysis of the electrical characteristics of LVDS drivers and receivers. Four unique EVMs are available to evaluate the different classes of LVDS devices offered by TI.

As seen in the Combination (...)

支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

SN65LVDS31 IBIS Model (Rev. B)

SLLC012A (29 KB) - IBIS 模型
支援產品和硬體
參考設計

TIDEP-01040 — 適合工業應用的晶圓晶片級封裝 60GHz mmWave 感測器參考設計

此參考設計專為需要更小外型尺寸和低功耗的應用而設計。此設計以 TI 的 IWRL6432W 60GHz mmWave 雷達裝置為基礎,並使用搭載 Isola® FR408HR 材料的四層 PCB 堆疊。此參考設計也具有較小的外型尺寸,無偵錯和評估介面。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (D) 16 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片