SN65LBC174A

現行

四路 RS-485 差分線路驅動器

立即訂購

產品規格表

document-pdfAcrobat SNx5LBC174A Quadruple RS-485 Differential Line Drivers datasheet (Rev. G) (英文) PDF | HTML

SN65LBC174A

現行

產品規格表

立即訂購

產品詳細資料

Number of receivers

0

Number of transmitters

4

Signaling rate (max) (Mbps)

30

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 12

Number of nodes

32

Isolated

No

Supply current (max) (µA)

23000

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Number of receivers

0

Number of transmitters

4

Signaling rate (max) (Mbps)

30

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 12

Number of nodes

32

Isolated

No

Supply current (max) (µA)

23000

Rating

Catalog

Operating temperature range (°C)

-40 to 85

SOIC (DW)

20

131.84 mm² (12.8 mm × 10.3 mm)

SOIC (DW)

16

106.09 mm² (10.3 mm × 10.3 mm)

PDIP (N)

16

181.42 mm² (19.3 mm × 9.4 mm)

Designed for TIA/EIA-485, TIA/EIA-422 and ISO 8482 applications
Signaling Rates ⁽¹⁾up to 30 Mbps
Propagation delay times < 11ns
Low standby power consumption 1.5mA max
Output ESD protection: 12kV
Driver positive- and negative-current limiting
Power-up and power-down glitch-free for line insertion applications
Thermal shutdown protection
Industry standard pin-out, compatible With SN75174, MC3487, DS96174, LTC487, and MAX3042

⁽¹⁾The signaling rate of a line is the number of voltage transitions that are made per second expressed in the units bps (bits per second).

Designed for TIA/EIA-485, TIA/EIA-422 and ISO 8482 applications
Signaling Rates ⁽¹⁾up to 30 Mbps
Propagation delay times < 11ns
Low standby power consumption 1.5mA max
Output ESD protection: 12kV
Driver positive- and negative-current limiting
Power-up and power-down glitch-free for line insertion applications
Thermal shutdown protection
Industry standard pin-out, compatible With SN75174, MC3487, DS96174, LTC487, and MAX3042

⁽¹⁾The signaling rate of a line is the number of voltage transitions that are made per second expressed in the units bps (bits per second).

The SN65LBC174A and SN75LBC174A are quadruple differential line drivers with 3-state outputs, designed for TIA/EIA-485 (RS-485), TIA/EIA-422 (RS-422), and ISO 8482 applications.

These devices are optimized for balanced multipoint bus transmission at signaling rates up to 30 million bits per second. The transmission media may be printed-circuit board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

Each driver features current limiting and thermal-shutdown circuitry making it suitable for high-speed multipoint applications in noisy environments. These devices are designed using LinBiCMOS, facilitating low power consumption and robustness.

The two EN inputs provide pair-wise driver enabling, or can be externally tied together to provide enable control of all four drivers with one signal. When disabled or powered off, the driver outputs present a high-impedance to the bus for reduced system loading.

The SN75LBC174A is characterized for operation over the temperature range of 0°C to 70°C. The SN65LBC174A is characterized for operation over the temperature range of –40°C to 85°C.

The SN65LBC174A and SN75LBC174A are quadruple differential line drivers with 3-state outputs, designed for TIA/EIA-485 (RS-485), TIA/EIA-422 (RS-422), and ISO 8482 applications.

These devices are optimized for balanced multipoint bus transmission at signaling rates up to 30 million bits per second. The transmission media may be printed-circuit board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

Each driver features current limiting and thermal-shutdown circuitry making it suitable for high-speed multipoint applications in noisy environments. These devices are designed using LinBiCMOS, facilitating low power consumption and robustness.

The two EN inputs provide pair-wise driver enabling, or can be externally tied together to provide enable control of all four drivers with one signal. When disabled or powered off, the driver outputs present a high-impedance to the bus for reduced system loading.

The SN75LBC174A is characterized for operation over the temperature range of 0°C to 70°C. The SN65LBC174A is characterized for operation over the temperature range of –40°C to 85°C.

filter

尋找其它 RS-485 & RS-422 收發器

下載觀看有字幕稿的影片影片