首頁 介面 HDMI、顯示介面和 MIPI IC
首頁
介面
HDMI、顯示介面和 MIPI IC

SN65DP159

現行

6-Gbps DP++ 1.1 至 HDMI 2.0 重新定時器，-40 至 85C 操作溫度

立即訂購
產品規格表

SN65DP159

現行
產品規格表 立即訂購

產品詳細資料

Type Retimer Protocols HDMI Rating Catalog Speed (max) (Gbpp) 6 Number of channels 4 Operating temperature range (°C) -40 to 85
Type Retimer Protocols HDMI Rating Catalog Speed (max) (Gbpp) 6 Number of channels 4 Operating temperature range (°C) -40 to 85
WQFN (RSB) 40 25 mm² (5 mm × 5 mm) VQFN (RGZ) 48 49 mm² (7 mm × 7 mm)
  • AC-coupled TMDS or DisplayPort Dual-Mode Physical Layer Input to HDMI2.0b TMDS Physical Layer Output Supporting up to 6 Gbps Data Rate, Compatible with HDMI2.0b Electrical Parameters
  • Supporting DisplayPort Dual-Mode Standard Version 1.1
  • Adaptive Receiver Equalizer and Programmable Fixed Equalizer up to 16.5 dB
  • High Speed Lane Control, Pre-emphasis and Transmit Swing, and Slew Rate Control
  • I2C or Pin Strap Programmable
  • Supports Type-2 I2C-over-AUX to DDC Bridge
  • Integrated TMDS Level Translator and CDR
  • Active I2C[4] Buffer
  • Input Swap on Main Lanes
  • Low Power Consumption
  • Low Power Consumption
    • –435 mW Active at 6-Gbps and –10 mW at Shutdown State
  • Both Extended Commercial and Industrial Temperature Device Options
  • 40-pin, 0.4 mm Pitch, 5 mm x 5 mm, WQFN Package, Pin Compatible to the TPD158 Redriver
  • 40-pin, 0.5 mm Pitch, 7 mm x 7 mm, VQFN Package
  • AC-coupled TMDS or DisplayPort Dual-Mode Physical Layer Input to HDMI2.0b TMDS Physical Layer Output Supporting up to 6 Gbps Data Rate, Compatible with HDMI2.0b Electrical Parameters
  • Supporting DisplayPort Dual-Mode Standard Version 1.1
  • Adaptive Receiver Equalizer and Programmable Fixed Equalizer up to 16.5 dB
  • High Speed Lane Control, Pre-emphasis and Transmit Swing, and Slew Rate Control
  • I2C or Pin Strap Programmable
  • Supports Type-2 I2C-over-AUX to DDC Bridge
  • Integrated TMDS Level Translator and CDR
  • Active I2C[4] Buffer
  • Input Swap on Main Lanes
  • Low Power Consumption
  • Low Power Consumption
    • –435 mW Active at 6-Gbps and –10 mW at Shutdown State
  • Both Extended Commercial and Industrial Temperature Device Options
  • 40-pin, 0.4 mm Pitch, 5 mm x 5 mm, WQFN Package, Pin Compatible to the TPD158 Redriver
  • 40-pin, 0.5 mm Pitch, 7 mm x 7 mm, VQFN Package

The SNx5DP159 device is a dual mode[1] DisplayPort to transition-minimized differential signal (TMDS) retimer supporting digital video interface (DVI) 1.0 and high-definition multimedia interface (HDMI) 1.4b and 2.0b output signals. The SNx5DP159 device supports the dual mode standard version 1.1 type 1 and type 2 through the DDC link or AUX channel. The SNx5DP159 device supports data rate up to 6-Gbps per data lane to support Ultra HD (4K × 2K / 60-Hz) 8-bits per color high-resolution video and HDTV with 16-bit color depth at 1080p (1920 × 1080 / 60-Hz). The SNx5DP159 device can automatically configure itself as a re-driver at data rates <1 Gbps, or as a retimer at more than this data rate. This feature can be turned off through I2C[4] programming.

For signal integrity, the SNx5DP159 device implements several features. The SNx5DP159 receiver supports both adaptive and fixed equalization to clean up inter-symbol interference (ISI) jitter or loss from the bandwidth-limited board traces or cables. When working as a retimer, the embedded clock data recovery (CDR) cleans up the input high frequency and random jitter from video source. The transmitter provides several features for passing compliance and reducing system-level design issues like de-emphasis, which compensates for the attenuation when driving long cables or high-loss board traces. The SNx5DP159 device also includes TMDS output amplitude adjust using an external resistor on the Vsadj pin, source termination selection, and output slew rate control. Device operation and configuration can be programmed by pin strapping or I2C[4].

The SNx5DP159 device implements several methods for power management and active power reduction.

The SNx5DP159 receiver uses several methods to determine whether the application supports HDMI1.4b[2] or HDMI2.0[3] data rates. The SNx5DP159 receiver comes in two packages: a 40-pin RSB supporting space-constrained applications and a 48-pin RGZ version supporting the full feature set for DisplayPort dual-mode standard version 1.1 in applications such as dongles.

The SN65DP159 device is characterized for an industrial operational temperature range from –40°C to 85°C.

The SN75DP159 device is characterized for an extended commercial operational temperature range from 0°C to 85°C.

The SNx5DP159 device is a dual mode[1] DisplayPort to transition-minimized differential signal (TMDS) retimer supporting digital video interface (DVI) 1.0 and high-definition multimedia interface (HDMI) 1.4b and 2.0b output signals. The SNx5DP159 device supports the dual mode standard version 1.1 type 1 and type 2 through the DDC link or AUX channel. The SNx5DP159 device supports data rate up to 6-Gbps per data lane to support Ultra HD (4K × 2K / 60-Hz) 8-bits per color high-resolution video and HDTV with 16-bit color depth at 1080p (1920 × 1080 / 60-Hz). The SNx5DP159 device can automatically configure itself as a re-driver at data rates <1 Gbps, or as a retimer at more than this data rate. This feature can be turned off through I2C[4] programming.

For signal integrity, the SNx5DP159 device implements several features. The SNx5DP159 receiver supports both adaptive and fixed equalization to clean up inter-symbol interference (ISI) jitter or loss from the bandwidth-limited board traces or cables. When working as a retimer, the embedded clock data recovery (CDR) cleans up the input high frequency and random jitter from video source. The transmitter provides several features for passing compliance and reducing system-level design issues like de-emphasis, which compensates for the attenuation when driving long cables or high-loss board traces. The SNx5DP159 device also includes TMDS output amplitude adjust using an external resistor on the Vsadj pin, source termination selection, and output slew rate control. Device operation and configuration can be programmed by pin strapping or I2C[4].

The SNx5DP159 device implements several methods for power management and active power reduction.

The SNx5DP159 receiver uses several methods to determine whether the application supports HDMI1.4b[2] or HDMI2.0[3] data rates. The SNx5DP159 receiver comes in two packages: a 40-pin RSB supporting space-constrained applications and a 48-pin RGZ version supporting the full feature set for DisplayPort dual-mode standard version 1.1 in applications such as dongles.

The SN65DP159 device is characterized for an industrial operational temperature range from –40°C to 85°C.

The SN75DP159 device is characterized for an extended commercial operational temperature range from 0°C to 85°C.
filter 尋找其它 HDMI、顯示介面和 MIPI IC
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 13
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 SNx5DP159 6-Gbps AC-Coupled TMDS™ to HDMI™ Level Shifter Retimer datasheet (Rev. G) PDF | HTML 2020/3/17
應用說明 High-Speed Layout Guidelines for Signal Conditioners and USB Hubs (Rev. A) PDF | HTML 2026/1/8
應用說明 DP159 and DP149 Configuration Guide 2019/12/13
應用說明 SN75DP159 Schematic Checklist 2019/8/28
使用指南 Pattern Verifier and Generator User's Guide 2018/4/27
使用指南 SNx5DP159RSB - TDP158RSB Transition Document (Rev. A) 2018/2/26
技術文章 How to select a redriver or retimer for HDMI 2.0 jitter cleansing PDF | HTML 2017/5/1
使用指南 EyeScan Tool User's Guide 2016/12/1
技術文章 How to select the right retimer for HDMI 2.0 applications PDF | HTML 2016/9/27
技術文章 How to reduce jitter and improve signal integrity in source and sink system design PDF | HTML 2016/7/11
技術文章 HDMI 2.0: How to generate cleaner signals over long traces, connectors and cables PDF | HTML 2016/6/21
白皮書 Build a true fidelity system using video signal conditioners 2016/6/9
應用說明 DP159 as DisplayPort Retimer 2015/8/3

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DP159RGZEVM — DP159RGZEVM 評估模組

DP159RSBEVM 是一塊 PCB，用於協助客戶評估 DP159 裝置於視訊應用中的表現。  此 EVM 配備適用於來源的 DP 連接及適用於接收器的 HDMI 連接。  J2 為標準 DP 連接器 (Molex 47272-0001)。  P2 為標準 HDMI 連接器 (Molex 4715-10001)。  電路板上有適用於 HDMI 來源的第三組視訊連接 (P1)，但 DP159RGZEVM 未安裝此功能。

使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

DP159RSBEVM — DP159RSBEVM 評估模組

DP159RSBEVM 是一塊 PCB，用於協助客戶評估 DP159 裝置於視訊應用中的表現。  此 EVM 配備適用於來源的 DP 連接及適用於接收器的 HDMI 連接。  J2 為標準 DP 連接器 (Molex 47272-0001)。  P2 為標準 HDMI 連接器 (Molex 4715-10001)。  電路板上有適用於 HDMI 來源的第三組視訊連接 (P1)，但 DP159RSBEVM 未安裝此功能。

使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
軟體程式設計工具

SLLC455 — EyeScan Tool

支援產品和硬體
模擬型號

SNx5DP159 IBIS-AMI Model

SLLM414.ZIP (18723 KB) - IBIS-AMI 模型
支援產品和硬體
參考設計

TIDA-050001 — HDMI 2.0 ESD 保護參考設計

此參考設計展示兩種不同的方式，以保護 HDMI 2.0 驅動器與重定時器的 TMDS 線路，使其免受靜電放電 (ESD) 影響。HDMI 標準適用於從機上盒到筆記型電腦到電視的多項應用領域。由於這些連接埠始終是外部埠，因此容易受到 ESD 事件的影響。高速 HDMI 2.0 訊號代表驅動器無法在 IC 中整合良好的 ESD 防護，因此需要離散式 ESD 防護裝置。HDMI 驅動器通常也非常敏感，這表示 ESD 保護必須具有超低鉗位。此設計會檢查兩種設定的初始 HDMI 2.0 規範資料，每塊電路板上執行的 ESD 測試和測試後的最終 HDMI 2.0 規範資料。如需有關保護 HDMI (...)

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RSB) 40 Ultra Librarian
VQFN (RGZ) 48 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片