MCP6291

現行

單路、5.5V、10MHz、50mA 輸出電流、低雜訊 (8.7-nV/√Hz)、RRIO 運算放大器

立即訂購

產品規格表

document-pdfAcrobat MCP629x 10-MHz, Rail-to-Rail Operational Amplifier datasheet (Rev. D) (英文) PDF | HTML

MCP6291

現行

產品規格表

立即訂購

產品詳細資料

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.4

Rail-to-rail

In, Out

GBW (typ) (MHz)

10

Slew rate (typ) (V/µs)

6.5

Vos (offset voltage at 25°C) (max) (mV)

3

Iq per channel (typ) (mA)

0.6

Vn at 1 kHz (typ) (nV√Hz)

8.7

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

1.1

Features

EMI Hardened

CMRR (typ) (dB)

103

Iout (typ) (A)

0.05

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.5

Input common mode headroom (to positive supply) (typ) (V)

0.5

Output swing headroom (to negative supply) (typ) (V)

0.05

Output swing headroom (to positive supply) (typ) (V)

-0.05

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.4

Rail-to-rail

In, Out

GBW (typ) (MHz)

10

Slew rate (typ) (V/µs)

6.5

Vos (offset voltage at 25°C) (max) (mV)

3

Iq per channel (typ) (mA)

0.6

Vn at 1 kHz (typ) (nV√Hz)

8.7

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

1.1

Features

EMI Hardened

CMRR (typ) (dB)

103

Iout (typ) (A)

0.05

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.5

Input common mode headroom (to positive supply) (typ) (V)

0.5

Output swing headroom (to negative supply) (typ) (V)

0.05

Output swing headroom (to positive supply) (typ) (V)

-0.05

SOT-23 (DBV)

5

8.12 mm² (2.9 mm × 2.8 mm)

SOT-SC70 (DCK)

5

4.2 mm² (2 mm × 2.1 mm)

Gain bandwidth product: 10-MHz typical
Operating supply voltage: 2.4 V to 5.5 V
Rail-to-rail input/output
Low input bias current: 1 pA
Low quiescent current: 0.6 mA
Input voltage noise: 8.7 nV/√Hz at f = 10 kHz
Internal RF and EMI filter
Extended temperature range: –40°C to 125°C
Unity-gain stable
Easier to stabilize with higher capacitive load due to resistive open-loop output impedance

Gain bandwidth product: 10-MHz typical
Operating supply voltage: 2.4 V to 5.5 V
Rail-to-rail input/output
Low input bias current: 1 pA
Low quiescent current: 0.6 mA
Input voltage noise: 8.7 nV/√Hz at f = 10 kHz
Internal RF and EMI filter
Extended temperature range: –40°C to 125°C
Unity-gain stable
Easier to stabilize with higher capacitive load due to resistive open-loop output impedance

The MCP6291 (single), MCP6292 (dual), and MCP6294 (quad) devices comprise a family of general-purpose, low-power operational amplifiers. Features such as rail-to-rail input and output swings, low quiescent current (600-µA/ch typical) combined with a wide bandwidth of 10 MHz, and low noise (8.7 nV/√Hz at 10 kHz) make this family attractive for a variety of applications that require a balance between cost and performance. The low input bias current enables the family to be used in applications with high-source impedances.

The robust design of the MCP629x provides ease-of-use to the circuit designer: a unity-gain stable, integrated RFI and EMI rejection filter, no phase reversal in overdrive condition, and high electrostatic discharge (ESD) protection (4-kV HBM).

The MCP629x family operates over the extended temperature range of –40°C to 125°C. The family has a power supply range of 2.4 V to 5.5 V.

The MCP6291 (single), MCP6292 (dual), and MCP6294 (quad) devices comprise a family of general-purpose, low-power operational amplifiers. Features such as rail-to-rail input and output swings, low quiescent current (600-µA/ch typical) combined with a wide bandwidth of 10 MHz, and low noise (8.7 nV/√Hz at 10 kHz) make this family attractive for a variety of applications that require a balance between cost and performance. The low input bias current enables the family to be used in applications with high-source impedances.

The robust design of the MCP629x provides ease-of-use to the circuit designer: a unity-gain stable, integrated RFI and EMI rejection filter, no phase reversal in overdrive condition, and high electrostatic discharge (ESD) protection (4-kV HBM).

The MCP629x family operates over the extended temperature range of –40°C to 125°C. The family has a power supply range of 2.4 V to 5.5 V.

filter

尋找其它一般用途運算放大器

下載觀看有字幕稿的影片影片

您可能會感興趣的類似產品

open-in-new

比較替代產品

針腳對針腳的功能與所比較的裝置相同。

TLV9061

現行

適合成本最佳化應用的單路、5.5-V、10-MHz、RRIO 運算放大器 Lower offset voltage (1.5 mV), lower power (0.538 mA)

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 1

重要文件	類型	標題	格式選項	下載最新的英文版本		日期
*	資料表	MCP629x 10-MHz, Rail-to-Rail Operational Amplifier datasheet (Rev. D)	PDF \| HTML			2019/10/1

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

AMP-PDK-EVM — 放大器性能開發套件評估模組

放大器性能開發套件 (PDK) 是一款評估模組 (EVM) 套件，可測試通用運算放大器 (op amp) 參數，並與大多數運算放大器和比較器相容。EVM 套件提供主板和多個插槽式子卡選項，可滿足封裝需求，使工程師能夠快速評估和驗證裝置性能。

AMP-PDK-EVM 套件支援五種最熱門的業界標準封裝，包括：

D (SOIC-8 和 SOIC-14)
PW (TSSOP-14)
DGK (VSSOP-8)
DBV (SOT23-5 和 SOT23-6)
DCK (SC70-5 和 SC70-6)

使用指南: PDF | HTML

支援產品和硬體

檢視選項

開發板

DIP-ADAPTER-EVM — DIP 轉接器評估模組

Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.

The (...)

支援產品和硬體

有庫存

限制：

登入以進行訂購

lock

登入以檢視庫存

??asset.out-of-stock-ti_zh_TW??

無法提供

開發板

DIYAMP-EVM — 通用自製 (DIY) 放大器電路評估模組

DIYAMP-EVM 是一系列評估模組 (EVM)，提供工程師與自組愛好者 (DIYers) 實作型放大器電路，協助快速驗證設計概念並模擬結果。提供三種業界標準封裝（SC70、SOT-23 和 SOIC）與 12 種常見放大器配置，支援單電源與雙電源架構的放大器、濾波器、穩定補償與比較器應用。

DIYAMP-EVM 可快速製作電路原型，並採用常見的 0805 或 0603 表面裝載元件。透過多種組合方式，此 EVM 可建立從簡單放大器電路到複雜訊號鏈的各種評估電路。此 EVM 支援模擬板、超微型 A 版 (SMA)、接頭和有線介面連接方式，並與大多數類比數位轉換器 (ADC) (...)

使用指南: PDF | HTML

支援產品和硬體

檢視選項

模擬型號