LPV542

現行

雙路、5.5-V、8-kHz、超低靜態電流 (480-nA)、1.6-V 最小供應電壓、RRIO 運算放大器

立即訂購

產品規格表

document-pdfAcrobat LPV542 Dual Nanopower 1.8 V, 490nA, RRIO CMOS Operational Amplifier datasheet (Rev. A) (英文) PDF | HTML

現在提供此產品的更新版本

open-in-new

比較替代產品

功能相同，但針腳輸出與所比較的裝置不同。

TLV8542

現行

雙路、3.6-V、8-kHz、超低靜態電流 (500-nA)、RRIO 運算放大器 Lower supply range (1.7 V to 3.6 V), higher power (.0005 mA)

LPV542

現行

產品規格表

立即訂購

產品詳細資料

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

1.6

Rail-to-rail

In, Out

GBW (typ) (MHz)

0.008

Slew rate (typ) (V/µs)

0.0037

Vos (offset voltage at 25°C) (max) (mV)

3

Iq per channel (typ) (mA)

0.00048

Vn at 1 kHz (typ) (nV√Hz)

250

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

1

Features

EMI Hardened

CMRR (typ) (dB)

101

Iout (typ) (A)

0.03

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

0.00085

Input common mode headroom (to positive supply) (typ) (V)

0.00048

Output swing headroom (to negative supply) (typ) (V)

0.002

Output swing headroom (to positive supply) (typ) (V)

-0.003

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

1.6

Rail-to-rail

In, Out

GBW (typ) (MHz)

0.008

Slew rate (typ) (V/µs)

0.0037

Vos (offset voltage at 25°C) (max) (mV)

3

Iq per channel (typ) (mA)

0.00048

Vn at 1 kHz (typ) (nV√Hz)

250

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

1

Features

EMI Hardened

CMRR (typ) (dB)

101

Iout (typ) (A)

0.03

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

0.00085

Input common mode headroom (to positive supply) (typ) (V)

0.00048

Output swing headroom (to negative supply) (typ) (V)

0.002

Output swing headroom (to positive supply) (typ) (V)

-0.003

VSSOP (DGK)

8

14.7 mm² (3 mm × 4.9 mm)

X1SON (DNX)

8

9 mm² (3 mm × 3 mm)

Wide Supply Range: 1.6 V to 5.5 V
Low Supply Current: 490 nA (typical/channel)
Good Offset Voltage: 3 mV (maximum/room)
Good TcVos: 1µV/°C (typical)
Gain-Bandwidth: 8 kHz (typical)
Rail-to-Rail Input and Output
Unity-Gain Stable
Low Input Bias Current : 1 pA (typ)
EMI Hardened
Temperature Range: –40°C to 125°C
Thin 3 mm × 3 mm × 0.45 mm X1SON package

Wide Supply Range: 1.6 V to 5.5 V
Low Supply Current: 490 nA (typical/channel)
Good Offset Voltage: 3 mV (maximum/room)
Good TcVos: 1µV/°C (typical)
Gain-Bandwidth: 8 kHz (typical)
Rail-to-Rail Input and Output
Unity-Gain Stable
Low Input Bias Current : 1 pA (typ)
EMI Hardened
Temperature Range: –40°C to 125°C
Thin 3 mm × 3 mm × 0.45 mm X1SON package

The LPV542 is an ultra-low-power, dual operational amplifier that provides 8kHz of bandwidth from 490nA of quiescent current making it well suited for battery-powered applications such as health and fitness wearables, building automation, and remote sensing nodes.

Each amplifier has a CMOS input stage with pico-amp bias currents which reduces errors commonly introduced in megaohm feedback resistance topologies such as photodiode and charge sense applications. In addition, the input common-mode range extends to the power supply rails and the output swings to within 3 mV of the rails, maintaining the widest dynamic range possible. Likewise, EMI protection is designed into the LPV542 in order to reduce system sensitivity to unwanted RF signals from mobile phones, WiFi, radio transmitters, and tag readers.

The LPV542 operates on a supply voltage as low as 1.6 V, ensuring continuous superior performance in low battery situations. The device is available in an 8-pad, low-profile, leadless 3 mm × 3 mm × 0.45 mm X1SON package and a standard 8 pin VSSOP.

The LPV542 is an ultra-low-power, dual operational amplifier that provides 8kHz of bandwidth from 490nA of quiescent current making it well suited for battery-powered applications such as health and fitness wearables, building automation, and remote sensing nodes.

Each amplifier has a CMOS input stage with pico-amp bias currents which reduces errors commonly introduced in megaohm feedback resistance topologies such as photodiode and charge sense applications. In addition, the input common-mode range extends to the power supply rails and the output swings to within 3 mV of the rails, maintaining the widest dynamic range possible. Likewise, EMI protection is designed into the LPV542 in order to reduce system sensitivity to unwanted RF signals from mobile phones, WiFi, radio transmitters, and tag readers.

The LPV542 operates on a supply voltage as low as 1.6 V, ensuring continuous superior performance in low battery situations. The device is available in an 8-pad, low-profile, leadless 3 mm × 3 mm × 0.45 mm X1SON package and a standard 8 pin VSSOP.

filter

尋找其它一般用途運算放大器

下載觀看有字幕稿的影片影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 3

重要文件	類型	標題	格式選項	日期
*	資料表	LPV542 Dual Nanopower 1.8 V, 490nA, RRIO CMOS Operational Amplifier datasheet (Rev. A)	PDF \| HTML	2015/11/25
	電子書	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML	2017/3/28
	應用說明	Precision Voltage Offset: When Does it Matter? (Rev. A)		2016/11/2

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

AMP-PDK-EVM — 放大器性能開發套件評估模組

放大器性能開發套件 (PDK) 是一款評估模組 (EVM) 套件，可測試通用運算放大器 (op amp) 參數，並與大多數運算放大器和比較器相容。EVM 套件提供主板和多個插槽式子卡選項，可滿足封裝需求，使工程師能夠快速評估和驗證裝置性能。

AMP-PDK-EVM 套件支援五種最熱門的業界標準封裝，包括：

D (SOIC-8 和 SOIC-14)
PW (TSSOP-14)
DGK (VSSOP-8)
DBV (SOT23-5 和 SOT23-6)
DCK (SC70-5 和 SC70-6)

使用指南: PDF | HTML

支援產品和硬體

檢視選項

開發板

DIP-ADAPTER-EVM — DIP 轉接器評估模組

Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.

The (...)

支援產品和硬體

有庫存

限制：

登入以進行訂購

lock

登入以檢視庫存

??asset.out-of-stock-ti_zh_TW??

無法提供

模擬型號