首頁 電源管理 LED 驅動器 RGB LED 驅動器

LP3943

現行

16 通道 RGB白色 LED 驅動器,透過 SMBUS/I2C 進行獨立字串控制

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相似於所比較的產品。
LP5018 現行 18 通道 I2C 定電流 RGB LED 驅動器 Newer device with more outputs, larger current and smaller IQ

產品詳細資料

Number of channels 16 LED current per channel (mA) 25 LED configuration Parallel Program memory No Topology Linear Programmable ramp control No Vin (min) (V) 2.3 Vin (max) (V) 5.5 Iout (max) (A) 0.2 Features I2C control Iq (typ) (mA) 0.35 Shutdown current (ISD) (typ) (µA) 2 Operating temperature range (°C) -40 to 85 Rating Catalog
Number of channels 16 LED current per channel (mA) 25 LED configuration Parallel Program memory No Topology Linear Programmable ramp control No Vin (min) (V) 2.3 Vin (max) (V) 5.5 Iout (max) (A) 0.2 Features I2C control Iq (typ) (mA) 0.35 Shutdown current (ISD) (typ) (µA) 2 Operating temperature range (°C) -40 to 85 Rating Catalog
WQFN (RTW) 24 16 mm² (4 mm × 4 mm)
  • Internal power-on reset
  • Active low reset
  • Internal precision oscillator
  • Variable dim rates (from 6.25ms to 1.6s; 160Hz to 0.625Hz)
  • 16 LED drivers (multiple programmable states: ON, OFF, input, and dimming at a specified rate)
  • 16 open-drain outputs capable of driving up to 25mA per LED
  • Internal power-on reset
  • Active low reset
  • Internal precision oscillator
  • Variable dim rates (from 6.25ms to 1.6s; 160Hz to 0.625Hz)
  • 16 LED drivers (multiple programmable states: ON, OFF, input, and dimming at a specified rate)
  • 16 open-drain outputs capable of driving up to 25mA per LED

The LP3943 is an integrated device capable of independently driving 16 LEDs. This device also contains an internal precision oscillator that provides all the necessary timing required for driving each LED. Two prescaler registers, along with two PWM registers, provide a versatile duty-cycle control. The LP3943 contains the ability to dim LEDs in SMBUS/I2C applications where it is required, to cut down on bus traffic.

Traditionally, dimming LEDs using a serial shift register such as 74LS594/5 requires a large amount of traffic on the serial bus. The LP3943 instead requires only the setup of the frequency and duty cycle for each output pin; from then on, only a single command from the host is required to turn each individual open drain output to an ON or OFF state, or to cycle a programmed frequency and duty cycle. Maximum output sink current is 25mA per pin and 200mA per package. Any ports not used for controlling the LEDs can be used for general purpose input/output expansion.

The LP3943 is an integrated device capable of independently driving 16 LEDs. This device also contains an internal precision oscillator that provides all the necessary timing required for driving each LED. Two prescaler registers, along with two PWM registers, provide a versatile duty-cycle control. The LP3943 contains the ability to dim LEDs in SMBUS/I2C applications where it is required, to cut down on bus traffic.

Traditionally, dimming LEDs using a serial shift register such as 74LS594/5 requires a large amount of traffic on the serial bus. The LP3943 instead requires only the setup of the frequency and duty cycle for each output pin; from then on, only a single command from the host is required to turn each individual open drain output to an ON or OFF state, or to cycle a programmed frequency and duty cycle. Maximum output sink current is 25mA per pin and 200mA per package. Any ports not used for controlling the LEDs can be used for general purpose input/output expansion.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 5
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LP3943 16-Channel RGB, White-LED Driver with Independent SMBUS/I2 C String Control datasheet (Rev. E) PDF | HTML 2024/10/9
白皮書 Common LED Functions and LED Driver Design Considerations 2020/9/21
應用說明 How to Select a RGB LED Driver 2019/8/8
EVM User's guide AN-1300 LP3943 Evaluation Kit (Rev. B) 2013/4/30
應用說明 AN-1715 LP3943/LP3944 as a GPIO Expander (Rev. A) 2013/4/30

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LP3943ISQEV — RGB/白光/藍光 16 LED 趣味閃爍光驅動器

RGB/White/Blue 16-LED Fun Light Driver

使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發套件

BOOSTXL-CAPKEYPAD — MSP430 CapTIvate™ MCU 觸控鍵盤 BoosterPack 插入式模組

BOOSTXL-CAPKEYPAD 是一套使用簡單的評估模組 (EVM),適用於採用 CapTIvate™ 技術的 MSP430FR2522 電容式觸控感應微控制器 (MCU)。BOOSTXL-CAPKEYPAD 可以三種不同方法使用 — 與 LaunchPad™ 開發套件、CapTIvate 開發套件 (MSP-CAPT-FR2633) 或 CapTIvate 程式設計器板 (CAPTIVATE-PGMR) 搭配使用。

BOOSTXL-CAPKEYPAD 讓您透過新增具有 LED 背光和近距喚醒功能的 12 鍵電容式觸控數位鍵盤來擴展您的 LaunchPad™ 開發套件設計。沒有 (...)

使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
驅動程式或資料庫

LP3943SW-LINUX — 適用於 LP3943 的 Linux 驅動程式

The Linux driver supports the LP3943 16-LED Fun Light Driver. The Linux driver supports communication through the I2C bus and interfaces with the GPIO and PWM sub-systems.

 

Linux Mainline Status

Available in Linux Main line: Yes
Available through git.ti.com: N/A

Supported Devices:

  • lp3943

 

Linux Source (...)

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RTW) 24 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片