LP2954
- 5-V Output within 1.2% Over Temperature
(A Grade) - Adjustable 1.23-V to 29-V Output Voltage Available (LP2954IM and LP2954AIM)
- Ensured 250-mA Output Current
- Extremely Low Quiescent Current
- Low Dropout Voltage
- Reverse Battery Protection
- Extremely Tight Line and Load Regulation
- Very Low Temperature Coefficient
- Current and Thermal Limiting
- Pin Compatible with LM2940 and LM340
(5-V Version Only) - Adjustable Version Adds ERROR Flag to Warn of Output Drop and a Logic-Controlled Shutdown
The LP2954 is a 5-V micropower LDO with very low quiescent current (90 μA typical at 1-mA load) and very low dropout voltage (typically 60 mV at light loads and 470 mV at 250-mA load current).
The quiescent current increases only slightly at dropout (120 μA typical), which prolongs battery life.
The LP2954 with a fixed 5-V output is available in three-pin TO-220 and DDPAK/TO-263 packages. The adjustable LP2954 is provided in an 8-pin, small-outline SOIC package. The adjustable version also provides a resistor network which can be pin strapped to set the output to any voltage from to 1.23 V to 29 V.
Reverse battery protection is provided for the IN pin.
The tight line and load regulation (0.04% typical), as well as very low output temperature coefficient make the LP2954 well suited for use as a low-power voltage reference.
Output accuracy is ensured at both room temperature and over the entire operating temperature range.
For all available packages, see the orderable addendum at the end of the data sheet.技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | LP2954, LP2954A 5-V and Adjustable Micropower LDOs datasheet (Rev. E) | PDF | HTML | 2016/7/28 | ||
| 應用說明 | AN-1061 Power Conversion in Line-Powered Equipment (Rev. B) | 2013/4/23 | ||||
| 應用說明 | Linear and Switching Voltage Regulator Fundamental Part 1 | 2007/3/21 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TIDA-00202 — HIPERFACE 位置編碼器介面參考設計
TIDA-00202 參考設計為 HIPERFACE 位置編碼器實作符合 EMC 規範的工業混合型類比和數位介面。具 IEC-ESD 和 IEC-EFT 保護的 3.3V 電源 RS485 收發器用於雙向參數通道。針對類比正弦/餘弦訊號通道，我們提供兩個選項，以便靈活地連接到帶或不帶嵌入式 ADC 的處理器，或者同時使用這兩個選項來實現備援。第一個選項採用具 SPI 輸出的全差動雙 12 位元 ADC，第二個選項採用具有單端類比輸出 (0-3.3V) 的雙差動輸入。此設計採用符合工業規範的 24V 輸入，且電壓範圍廣泛，從 16V 至 36V 均可覆蓋。編碼器的電源供應可設定在 7 至 (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| TO-220 (NDE) | 3 | Ultra Librarian |
| TO-263 (KTT) | 3 | Ultra Librarian |
| SOIC (D) | 8 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。