LMR70503
- Tiny 8-Bump Thin DSBGA Package: 0.84 mm × 1.615 mm × 0.6 mm
- 2.8 V to 5.5 V Input Voltage Range
- Adjustable Output Voltage: -0.9 V to -5.5 V
- 320 mA Switch Current Limit
- 500 kHz Minimum Switching Frequency
- Ground Referred Enable Input
- Under Voltage Lock Out (UVLO)
- No External Compensation
- Internal Soft Start
- 1 µA Shutdown Supply Current
- Small Output Voltage Ripple
- WEBENCH Enabled
Performance Benefits
- Easy To Use
- Tiny Overall Solution Size Reduces System Cost
SIMPLE SWITCHER is a trademark of Texas Instruments. WEBENCH is a trademark of Texas Instruments. All trademarks are the property of their respective owners.
The LMR70503 is a buck-boost converter with adjustable negative output voltage in a tiny 8-bump thin DSBGA package. Its unique control method is designed to provide fast transient response, low output noise, high efficiency, and tight regulation in the smallest possible PCB area. The LMR70503 has built in soft start, peak current limit, minimum switching frequency, and Under Voltage Lock Out (UVLO), with no external compensation required. For ease of use, the Enable pin is referred to the IC ground, instead of the lowest potential of the IC: the negative output voltage.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
LMR70503EVM — LMR70503 評估模組
TIDA-00431 — 採用 8 GHz DC 耦合差動放大器的射頻取樣 4 GSPS ADC 參考設計
寬頻射頻 (RF) 接收器可大幅提高無線電設計的靈活性。寬廣的瞬時頻寬允許在不更換硬體的情況下進行靈活調諧,並能夠擷取頻率相差很大的多個通道。
此參考設計說明了一種寬頻 RF 接收器,它採用 4GSPS 類比數位轉換器 (ADC),並具有 8GHz DC 耦合全差動放大器前端。放大器前端提供訊號增益,並允許擷取低至 DC 的訊號。這是使用平衡不平衡轉換器耦合輸入時無法實現的。
TIDA-00826 — 50 Ohm 2 GHz 示波器前端參考設計
此參考設計為 50Ω 輸入示波器應用類比前端的一部分。系統設計師可以輕鬆使用此評估平台,在頻域和時域應用中處理從 DC 至 2GHz 的輸入訊號。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| DSBGA (YFX) | 8 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。