LMR64010
- Input Voltage Range of 2.7V to 14V
- Output Voltage up to 40V
- Switch Current up to 1A
- 1.6 MHz Switching Frequency
- Low Shutdown Iq, <1 µA
- Cycle-by-Cycle Current Limiting
- Internally Compensated
- SOT-23-5 Packaging (2.92 x 2.84 x 1.08mm)
- Fully Enabled for WEBENCH® Power Designer
Performance Benefits
- Extremely Easy to Use
- Tiny Overall Solution Reduces System Cost
All trademarks are the property of their respective owners.
The LMR64010 switching regulators is a current-mode boost converter operating at a fixed frequency of 1.6 MHz.
The use of SOT-23 package, made possible by the minimal power loss of the internal 1A switch, and use of small inductors and capacitors result in the industry's highest power density. The 40V internal switch makes these solutions perfect for boosting to voltages of 16V or greater.
These parts have a logic-level shutdown pin that can be used to reduce quiescent current and extend battery life.
Protection is provided through cycle-by-cycle current limiting and thermal shutdown. Internal compensation simplifies design and reduces component count.
技術文件
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
LMR64010XMFDEMO — SOT-23 的 LMR64010 SIMPLE SWITCHER® 40Vout、1A 升壓穩壓器展示板
The LMR62014 and LMR64010 are high frequency switching boost regulators which offer small size and high power conversion efficiency. The parts operate at a 1.6MHz switching frequency. The primary difference between the LMR62014 and LMR64010 is that the LMR62014 has a higher current internal switch (...)
PMP22339 — 適用伺服器電池備援充電的高電壓 800-W SEPIC 轉換器參考設計
TIDA-01393 — 適合 Xilinx® Zynq® UltraScale+™ MPSoC 應用的電源參考設計
此參考設計為可設定的電源解決方案，其設計旨在處理整個 Xilinx® Zynq® UltraScale+ (ZU+) 系列 MPSoC 裝置運用於各種使用案例。
各種版本的 TPS65086x PMIC 讓此設計可為各種裝置提供電源，從基本的搭載雙核心 Arm® Cortex®-A53 之應用處理器及雙核心 Arm Cortex-R5 即時處理器之 ZU2CG 裝置，一直到較高階的 ZU7EV、ZU19EG 與 ZU21DR 裝置，這可以新增其他元件至 MPSoC，例如圖形處理單元、視訊轉碼器單元和高達 16 個 16.3Gbps 的收發器。
此設計包括許多可搭配 TPS65086x (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。