首頁 電源管理 DC/DC 切換穩壓器 DC/DC 控制器
首頁
電源管理
DC/DC 切換穩壓器
DC/DC 控制器

LM51561H-Q1

現行

具備展頻和 hiccup 的 2.2-MHz 大範圍 VIN 非同步升壓、返馳和 SEPIC 控制器

立即訂購
產品規格表

LM51561H-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Topology Boost, Flyback, SEPIC Vin (max) (V) 60 Vin (min) (V) 1.5 Vout (max) (V) 300 Vout (min) (V) 1.5 Control mode current mode Features Adjustable current limit, Enable, Frequency synchronization, Hiccup mode protection, Light-load efficiency, Nonsynchronous rectification, Power good, Spread Spectrum, UVLO adjustable EMI features Frequency Dithering, Spread Spectrum Duty cycle (max) (%) 93 Iq (typ) (A) 0.00049 TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 150
Rating Automotive Topology Boost, Flyback, SEPIC Vin (max) (V) 60 Vin (min) (V) 1.5 Vout (max) (V) 300 Vout (min) (V) 1.5 Control mode current mode Features Adjustable current limit, Enable, Frequency synchronization, Hiccup mode protection, Light-load efficiency, Nonsynchronous rectification, Power good, Spread Spectrum, UVLO adjustable EMI features Frequency Dithering, Spread Spectrum Duty cycle (max) (%) 93 Iq (typ) (A) 0.00049 TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 150
HTSSOP (PWP) 14 32 mm² (5 mm × 6.4 mm)
  • AEC-Q100 Qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C TA
    • Maximum operating temperature 150°C TJ
  • Functional Safety-Capable
    • Documentation available to aid functional safety system design
  • Suited for wide input operating range car battery applications
    • 3.5-V to 60-V Operating range (65-V abs max)
    • 2.97-V to 16-V when BIAS = VCC
    • Minimum boost supply voltage 1.5 V when BIAS ≥ 3.5 V
    • Input transient protection up to 65 V
    • Minimized battery drain
      • Low shutdown current ( IQ ≤ 2.6 µA )
      • Low operating current ( IQ ≤ 490 µA )
  • Small solution size and low cost
    • Maximum switching frequency of 2.2 MHz
    • Integrated error amplifier allows primary-side regulation without optocoupler (flyback)
    • Minimized undershoot during cranking (start-stop application)
  • EMI mitigation
    • Selectable dual random spread spectrum
  • Higher efficiency with low-power dissipation
    • 100-mV ±7% accurate current limit threshold
    • Strong 1.5-A peak standard MOSFET driver
    • Supports external VCC supply
  • Avoid AM band interference and crosstalk
    • Optional clock synchronization
    • Dynamically programmable switching frequency from 100 kHz to 2.2 MHz
  • Integrated protection features
    • Constant peak current limiting over input voltage
    • Optional hiccup mode overload protection (see the Device Comparison Table)
    • Programmable line UVLO
    • OVP protection
    • Thermal shutdown
  • Accurate ±1% accuracy feedback reference
  • Programmable extra slope compensation
  • Adjustable soft start
  • PGOOD indicator
  • 14-Pin HTSSOP package (5.0 mm × 4.4 mm)
  • Create a custom design using the LM5156xH-Q1 with the WEBENCH power designer
  • AEC-Q100 Qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C TA
    • Maximum operating temperature 150°C TJ
  • Functional Safety-Capable
    • Documentation available to aid functional safety system design
  • Suited for wide input operating range car battery applications
    • 3.5-V to 60-V Operating range (65-V abs max)
    • 2.97-V to 16-V when BIAS = VCC
    • Minimum boost supply voltage 1.5 V when BIAS ≥ 3.5 V
    • Input transient protection up to 65 V
    • Minimized battery drain
      • Low shutdown current ( IQ ≤ 2.6 µA )
      • Low operating current ( IQ ≤ 490 µA )
  • Small solution size and low cost
    • Maximum switching frequency of 2.2 MHz
    • Integrated error amplifier allows primary-side regulation without optocoupler (flyback)
    • Minimized undershoot during cranking (start-stop application)
  • EMI mitigation
    • Selectable dual random spread spectrum
  • Higher efficiency with low-power dissipation
    • 100-mV ±7% accurate current limit threshold
    • Strong 1.5-A peak standard MOSFET driver
    • Supports external VCC supply
  • Avoid AM band interference and crosstalk
    • Optional clock synchronization
    • Dynamically programmable switching frequency from 100 kHz to 2.2 MHz
  • Integrated protection features
    • Constant peak current limiting over input voltage
    • Optional hiccup mode overload protection (see the Device Comparison Table)
    • Programmable line UVLO
    • OVP protection
    • Thermal shutdown
  • Accurate ±1% accuracy feedback reference
  • Programmable extra slope compensation
  • Adjustable soft start
  • PGOOD indicator
  • 14-Pin HTSSOP package (5.0 mm × 4.4 mm)
  • Create a custom design using the LM5156xH-Q1 with the WEBENCH power designer

The LM5156xH-Q1 (LM5156H-Q1 and LM51561H-Q1) device is a wide input range, non-synchronous boost controller that uses peak current mode control. The device can be used in boost, SEPIC, and flyback topologies.

The device can start up from a 1-cell battery with a minimum of 2.97 V if the BIAS pin is connected to the VCC pin. It can operate with the input supply voltage as low as 1.5 V if the BIAS pin is greater than 3.5 V.

The LM5156xH-Q1 (LM5156H-Q1 and LM51561H-Q1) device is a wide input range, non-synchronous boost controller that uses peak current mode control. The device can be used in boost, SEPIC, and flyback topologies.

The device can start up from a 1-cell battery with a minimum of 2.97 V if the BIAS pin is connected to the VCC pin. It can operate with the input supply voltage as low as 1.5 V if the BIAS pin is greater than 3.5 V.
filter 尋找其它 DC/DC 控制器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LM5156xH-Q1 2.2-MHz Wide VIN 65-V Non-synchronous Boost/SEPIC/Flyback Controller with 150°C Maximum Junction Temperature datasheet PDF | HTML 2020/9/23
白皮書 Isolated Bias Power Supply Architecture for HEV and EV Traction Inverters PDF | HTML 2023/10/11
應用說明 How to Design a Boost Converter Using the LM5156 (Rev. A) PDF | HTML 2022/11/14
功能安全資訊 LM34966-Q1, LM5156x-Q1 Functional Safety, FIT Rate, Failure Mode Distribution (Rev. C) PDF | HTML 2021/4/28

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM5156HEVM-FLY — LM5156H 返馳式控制器評估模組

LM5156HEVM-FLY 評估模組展示了 LM51561（TSSOP 封裝）作為廣泛輸入非同步返馳控制器的功能和性能。標準配置的設計可在 18 V 至 36 V 輸入，在 250 kHz 下切換時，在 4 A 時提供 5 V 的穩壓輸出。此評估模組旨在簡化配置，讓使用者能夠在同一模組上評估多種不同應用。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
計算工具

SNVC240 — LM5155/56 Flyback Controller Quick Start Calculator

LM5155/56 Flyback Controller Quick Start Calculator
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (PWP) 14 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片