首頁 電源管理 閘極驅動器 低壓側驅動器

LM5111

現行

具高電位作動或低輸出 4-V UVLO 的 5-A/3-A 雙通道閘極驅動器

現在提供此產品的更新版本

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
UCC27624 現行 具 4V UVLO 和低傳播延遲的 30V VDD、5A/5A 雙通道低壓側驅動器 Wide VDD and enable

產品詳細資料

Number of channels 2 Power switch MOSFET Peak output current (A) 5 Input supply voltage (min) (V) 3.5 Input supply voltage (max) (V) 14 Features UVLO Configured to Drive PFET through OUT_A Operating temperature range (°C) -40 to 125 Rise time (ns) 14 Fall time (ns) 12 Propagation delay time (µs) 0.025 Input threshold TTL Channel input logic Combination, Inverting, Non-Inverting Input negative voltage (V) 0 Rating Catalog Undervoltage lockout (typ) (V) 3 Driver configuration Dual, Independent
Number of channels 2 Power switch MOSFET Peak output current (A) 5 Input supply voltage (min) (V) 3.5 Input supply voltage (max) (V) 14 Features UVLO Configured to Drive PFET through OUT_A Operating temperature range (°C) -40 to 125 Rise time (ns) 14 Fall time (ns) 12 Propagation delay time (µs) 0.025 Input threshold TTL Channel input logic Combination, Inverting, Non-Inverting Input negative voltage (V) 0 Rating Catalog Undervoltage lockout (typ) (V) 3 Driver configuration Dual, Independent
SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm) HVSSOP (DGN) 8 14.7 mm² (3 mm × 4.9 mm)
  • Independently Drives Two N-Channel MOSFETs
  • Compound CMOS and Bipolar Outputs Reduce Output Current Variation
  • 5-A Sink and 3-A Source Current Capability
  • Two Channels can be Connected in Parallel to Double the Drive Current
  • Independent Inputs (TTL Compatible)
  • Fast Propagation Times (25 ns Typical)
  • Fast Rise and Fall Times (14 ns and 12 ns Rise and Fall, Respectively, With 2-nF Load)
  • Available in Dual Noninverting, Dual Inverting and Combination Configurations
  • Supply Rail Undervoltage Lockout Protection (UVLO)ƒ
  • LM5111-4 UVLO Configured to Drive PFET through OUT_A and NFET through OUT_B
  • Pin Compatible With Industry Standard Gate Drivers
  • Independently Drives Two N-Channel MOSFETs
  • Compound CMOS and Bipolar Outputs Reduce Output Current Variation
  • 5-A Sink and 3-A Source Current Capability
  • Two Channels can be Connected in Parallel to Double the Drive Current
  • Independent Inputs (TTL Compatible)
  • Fast Propagation Times (25 ns Typical)
  • Fast Rise and Fall Times (14 ns and 12 ns Rise and Fall, Respectively, With 2-nF Load)
  • Available in Dual Noninverting, Dual Inverting and Combination Configurations
  • Supply Rail Undervoltage Lockout Protection (UVLO)ƒ
  • LM5111-4 UVLO Configured to Drive PFET through OUT_A and NFET through OUT_B
  • Pin Compatible With Industry Standard Gate Drivers

The LM5111 Dual Gate Driver replaces industry standard gate drivers with improved peak output current and efficiency. Each compound output driver stage includes MOS and bipolar transistors operating in parallel that together sink more than 5-A peak from capacitive loads. Combining the unique characteristics of MOS and bipolar devices reduces drive current variation with voltage and temperature. Undervoltage lockout protection is also provided. The drivers can be operated in parallel with inputs and outputs connected to double the drive current capability. This device is available in the SOIC package or the thermally enhanced
MSOP-PowerPAD package.

The LM5111 Dual Gate Driver replaces industry standard gate drivers with improved peak output current and efficiency. Each compound output driver stage includes MOS and bipolar transistors operating in parallel that together sink more than 5-A peak from capacitive loads. Combining the unique characteristics of MOS and bipolar devices reduces drive current variation with voltage and temperature. Undervoltage lockout protection is also provided. The drivers can be operated in parallel with inputs and outputs connected to double the drive current capability. This device is available in the SOIC package or the thermally enhanced
MSOP-PowerPAD package.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同,但針腳輸出與所比較的裝置不同。
UCC27524A 現行 具有 5-V UVLO、啟用和負輸入電壓處理功能的 5-A/5-A 雙通道閘極驅動器 This product has higher drive current with 5-A sink/source, as well as faster propagation delay (13-ns) , rise time (7-ns) and fall time (6-ns).

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

UCC27423-4-5-Q1EVM — 具有啟用功能的 UCC2742xQ1 雙路 4A 高速低壓側 MOSFET 驅動器評估模組

UCC2742xQ1 EVM 是高速雙 MOSFET 評估模組,提供可快速且輕鬆啟動 UCC2742xQ1 驅動器的測試平台。由 4V 至 15V 外部單電源供電,並配備全方位的測試點和跨接器組。所有裝置都有獨立的輸入與輸出線路,且所有裝置都共享一個共同接地。提供啟用 (ENBL) 功能以更妥善控制驅動器應用的運作,裝置的驅動器訊號可透過相同的啟用接腳啟用或停用。
使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

LM5111-1M TINA-TI Transient Reference Design

SNVM404.TSC (146 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

LM5111-1M TINA-TI Transient Spice Model

SNVM405.ZIP (9 KB) - TINA-TI Spice 模型
支援產品和硬體
模擬型號

LM5111-2M TINA-TI Transient Reference Design

SNVM411.TSC (147 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

LM5111-2M TINA-TI Transient Spice Model

SNVM410.ZIP (10 KB) - TINA-TI Spice 模型
支援產品和硬體
模擬型號

LM5111-3M TINA-TI Transient Reference Design

SNVM414.TSC (152 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

LM5111-3M TINA-TI Transient Spice Model

SNVM415.ZIP (10 KB) - TINA-TI Spice 模型
支援產品和硬體
模擬型號

LM5111-4M TINA-TI Transient Reference Design

SNVM402.TSC (148 KB) - TINA-TI 參考設計
支援產品和硬體
模擬型號

LM5111-4M TINA-TI Transient Spice Model

SNVM403.ZIP (9 KB) - TINA-TI Spice 模型
支援產品和硬體
模擬型號

LM5111_1M PSpice Transient Model

SNVM358.ZIP (55 KB) - PSpice 模型
支援產品和硬體
模擬型號

LM5111_1M Unencrypted PSpice Transient Model

SNVMAD2.ZIP (1 KB) - PSpice 模型
支援產品和硬體
模擬型號

LM5111_2M PSpice Transient Model

SNVM360.ZIP (45 KB) - PSpice 模型
支援產品和硬體
模擬型號

LM5111_2M Unencrypted PSpice Transient Model

SNVMAD5.ZIP (1 KB) - PSpice 模型
支援產品和硬體
模擬型號

LM5111_3M PSpice Transient Model

SNVM359.ZIP (44 KB) - PSpice 模型
支援產品和硬體
模擬型號

LM5111_3M Unencrypted PSpice Transient Model

SNVMAD3.ZIP (1 KB) - PSpice 模型
支援產品和硬體
模擬型號

LM5111_4M PSpice Transient Model

SNVM357.ZIP (44 KB) - PSpice 模型
支援產品和硬體
模擬型號

LM5111_4M Unencrypted PSpice Transient Model

SNVMAD4.ZIP (1 KB) - PSpice 模型
支援產品和硬體
參考設計

TIDM-AUTO-DC-LED-LIGHTING — 適用於汽車頭燈應用的多通道高密度 LED 控制

此設計搭載 TMS320F2803x Piccolo 微控制器,實作適合一般車用照明系統的高效率多通道 DC-DC LED 控制系統。此設計支援高達 6 通道的 LED 控制,每個通道皆具備最大 1.2A 的電流驅動能力。此系統採用升壓和降壓的兩級功率拓撲結構,能夠以 8V 至 20V 的廣泛輸入 DC 電壓運作,非常適合汽車應用。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (D) 8 Ultra Librarian
HVSSOP (DGN) 8 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片