LM393-MIL
- Single-Supply or Dual Supplies
- Wide Range
of Supply Voltage
- Maximum Rating: 2 V to 36 V
- Tested to 30 V
- Low Supply-Current Drain Independent of Supply
Voltage: 0.4 mA (Typical) Per Comparator - Low Input Bias Current: 25 nA (Typical)
- Low Input Offset Voltage: 2 mV (Typical)
- Common-Mode Input Voltage Range Includes Ground
- Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage: ±36 V - Low Output Saturation Voltage
- Output Compatible with TTL, MOS, and CMOS
- On Products Compliant to MIL-PRF-38535, All
Parameters are Tested Unless Otherwise Noted.
On All Other Products, Production Processing does not Necessarily Include Testing of All Parameters.
These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.
The LM393-MIL device is characterized for operation from 0°C to 70°C.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | LM393-MIL Dual Differential Comparators datasheet | PDF | HTML | 2017/6/13 | ||
| 電子書 | The Signal e-book: A compendium of blog posts on op amp design topics | PDF | HTML | 2017/3/28 | |||
| 應用說明 | Designing Overcurrent protection for TPL7407L Peripheral Driver | 2014/11/5 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
PMP6712 — 適用 PoE 供電設備 (PSE) 的雙通道全橋式轉換器參考設計 (54 V @ 30 A)
This is a phase-shifted full-bridge converter reference design capable of delivering 1600 W of isolated output power and achieving efficiency of greater than 96%. This design uses the UCC28950 controller in a dual-phase primary/secondary configuration. An LM5017 constant on-time synchronous buck (...)
TIDA-00782 — 使用 DLP® 技術的可攜式、高亮度 HD 投影顯示參考設計
此參考設計採用 DLP Pico™ 0.45 英吋 WXGA 顯示晶片組，可為投影顯示應用提供 HD 解析度，適用於投影顯示應用，例如配件投影機、智慧型投影機、行動智慧型 TV、內建式投影機（如筆記型電腦和熱點中的投影功能）等應用。此設計中使用的晶片組包含 DLP4501 (.45 WXGA) DMD 和 DLPC6401 顯示控制器。外部 LED 驅動器參考設計可透過以下連結存取：PMP4356
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| DIESALE (Y) | — | Ultra Librarian |