首頁 電源管理 DC/DC 切換穩壓器 DC/DC 控制器

LM3475

現行

10-V 磁滯 PFET 降壓控制器

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 5 Vin (max) (V) 10 Vin (min) (V) 2.7 Vout (max) (V) 10 Vout (min) (V) 0.8 Control mode Hysteretic Features Enable, Light Load Efficiency Duty cycle (max) (%) 100 Iq (typ) (A) 0.00026 Number of phases 1 Operating temperature range (°C) -40 to 125
Rating Catalog Topology Buck Iout (max) (A) 5 Vin (max) (V) 10 Vin (min) (V) 2.7 Vout (max) (V) 10 Vout (min) (V) 0.8 Control mode Hysteretic Features Enable, Light Load Efficiency Duty cycle (max) (%) 100 Iq (typ) (A) 0.00026 Number of phases 1 Operating temperature range (°C) -40 to 125
SOT-23 (DBV) 5 8.12 mm² (2.9 mm × 2.8 mm)
  • Easy-to-Use Control Methodology
  • 0.8 V to VIN Adjustable Output Range
  • High Efficiency (90% Typical)
  • ±0.9% (±1.5% Over Temperature) Feedback
    Voltage
  • 100% Duty Cycle Capable
  • Maximum Operating Frequency up to 2 MHz
  • Internal Soft-Start
  • Enable Pin
  • Easy-to-Use Control Methodology
  • 0.8 V to VIN Adjustable Output Range
  • High Efficiency (90% Typical)
  • ±0.9% (±1.5% Over Temperature) Feedback
    Voltage
  • 100% Duty Cycle Capable
  • Maximum Operating Frequency up to 2 MHz
  • Internal Soft-Start
  • Enable Pin

The LM3475 is a hysteretic P-FET buck controller designed to support a wide range of high efficiency applications in a very small SOT-23-5 package. The hysteretic control scheme has several advantages, including simple system design with no external compensation, stable operation with a wide range of components, and extremely fast transient response. Hysteretic control also provides high efficiency operation, even at light loads. The PFET architecture allows for low component count as well as 100% duty cycle and ultra-low dropout operation.

The LM3475 is a hysteretic P-FET buck controller designed to support a wide range of high efficiency applications in a very small SOT-23-5 package. The hysteretic control scheme has several advantages, including simple system design with no external compensation, stable operation with a wide range of components, and extremely fast transient response. Hysteretic control also provides high efficiency operation, even at light loads. The PFET architecture allows for low component count as well as 100% duty cycle and ultra-low dropout operation.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 5
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LM3475 Hysteretic PFET Buck Controller datasheet (Rev. C) PDF | HTML 2015/10/31
類比設計期刊 Control-Mode Quick Reference Guide (Rev. B) PDF | HTML 2023/8/29
選擇指南 Power Management Guide 2018 (Rev. R) 2018/6/25
使用指南 PMLK Buck Experiment Book (Rev. B) 2017/4/21
使用指南 Cost Effective Test Methods Using PMLK BUCK Boards (Rev. A) 2016/8/31

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM3475EVAL — 磁滯 PFET 降壓控制器

The LM3475 evaluation board is provided as a tool for developing DC/DC converters based on the LM3475 IC. As shown in Figure 1, the evaluation board is configured to provide an output of 2.5V at up to 2A from an input up to 10V. The corresponding bill of material is given in Table 1. Typical (...)

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

PMLKBUCKEVM — 使用 TPS54160 和 LM3475 的 TI-PMLK 降壓實驗電路板

TI-PMLK 升壓實驗板是 TI 電源管理實驗套件 (TI-PMLK) 系列的一部分。TI-PMLK 系列提供動手實作的學習方式,以加強對電源供應知識的理解。模組化格式允許使用者依自身需求客製化 TI-PMLK 系列的學習體驗,以達到對電源設計理解的最大效益。TI-PMLK 降壓實驗板採用 TPS54160 與 LM3475。TI-PMLK 降壓實驗室手冊包含涵蓋實際應用中各種穩態、暫態與動態條件測試的理論與實驗。

 

支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-23 (DBV) 5 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片