LM2902LV

現行

四路 5.5-V 1-MHz 3-mV 偏移電壓運算放大器

立即訂購

產品規格表

document-pdfAcrobat LM290xLV Industry Standard, Low Voltage Operational Amplifiers datasheet (Rev. C) (英文) PDF | HTML

LM2902LV

現行

產品規格表

立即訂購

產品詳細資料

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.7

Rail-to-rail

In to V-

GBW (typ) (MHz)

1

Slew rate (typ) (V/µs)

1.5

Vos (offset voltage at 25°C) (max) (mV)

3

Iq per channel (typ) (mA)

0.09

Vn at 1 kHz (typ) (nV√Hz)

40

Rating

Catalog

Operating temperature range (°C)

-40 to 125

TI functional safety category

Functional Safety-Capable

Offset drift (typ) (µV/°C)

4

Features

Cost Optimized, EMI Hardened, Small Size

Input bias current (max) (pA)

15

CMRR (typ) (dB)

92

Iout (typ) (A)

0.04

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

-1

Output swing headroom (to negative supply) (typ) (V)

0.04

Output swing headroom (to positive supply) (typ) (V)

-1

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.7

Rail-to-rail

In to V-

GBW (typ) (MHz)

1

Slew rate (typ) (V/µs)

1.5

Vos (offset voltage at 25°C) (max) (mV)

3

Iq per channel (typ) (mA)

0.09

Vn at 1 kHz (typ) (nV√Hz)

40

Rating

Catalog

Operating temperature range (°C)

-40 to 125

TI functional safety category

Functional Safety-Capable

Offset drift (typ) (µV/°C)

4

Features

Cost Optimized, EMI Hardened, Small Size

Input bias current (max) (pA)

15

CMRR (typ) (dB)

92

Iout (typ) (A)

0.04

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

-1

Output swing headroom (to negative supply) (typ) (V)

0.04

Output swing headroom (to positive supply) (typ) (V)

-1

SOIC (D)

14

51.9 mm² (8.65 mm × 6 mm)

SOT-23-THN (DYY)

14

13.692 mm² (4.2 mm × 3.26 mm)

TSSOP (PW)

14

32 mm² (5 mm × 6.4 mm)

Industry standard amplifier for cost-sensitive systems
Low input offset voltage: ±1 mV
Common-mode voltage range includes ground
Unity-gain bandwidth: 1 MHz
Low broadband noise: 40 nV/√Hz
Low quiescent current: 90 µA/Ch
Unity-gain stable
Operational at supply voltages from 2.7 V to 5.5 V
Offered in dual- and quad-channel variants
Robust ESD specification: 2-kV HBM
Extended temperature range: –40°C to 125°C

Industry standard amplifier for cost-sensitive systems
Low input offset voltage: ±1 mV
Common-mode voltage range includes ground
Unity-gain bandwidth: 1 MHz
Low broadband noise: 40 nV/√Hz
Low quiescent current: 90 µA/Ch
Unity-gain stable
Operational at supply voltages from 2.7 V to 5.5 V
Offered in dual- and quad-channel variants
Robust ESD specification: 2-kV HBM
Extended temperature range: –40°C to 125°C

The LM290xLV family includes the dual LM2904LV and quad LM2902LV operational amplifiers, or op amps. The devices operate from a low voltage of 2.7 V to 5.5 V.

These op amps supply an alternative to the LM2904 and LM2902 in low-voltage applications that are sensitive to cost. Some applications are large appliances, smoke detectors, and personal electronics. The LM290xLV devices supply better performance than the LM290x devices at low voltage, and have lower power consumption. The op amps are stable at unity gain, and do not have reverse phase in overdrive conditions. The design for ESD gives the LM290xLV family an HBM specification for a minimum of 2 kV.

The LM290xLV family is available in packages that have industry standards. The packages include SOIC, VSSOP, and TSSOP packages.

The LM290xLV family includes the dual LM2904LV and quad LM2902LV operational amplifiers, or op amps. The devices operate from a low voltage of 2.7 V to 5.5 V.

These op amps supply an alternative to the LM2904 and LM2902 in low-voltage applications that are sensitive to cost. Some applications are large appliances, smoke detectors, and personal electronics. The LM290xLV devices supply better performance than the LM290x devices at low voltage, and have lower power consumption. The op amps are stable at unity gain, and do not have reverse phase in overdrive conditions. The design for ESD gives the LM290xLV family an HBM specification for a minimum of 2 kV.

The LM290xLV family is available in packages that have industry standards. The packages include SOIC, VSSOP, and TSSOP packages.

filter

尋找其它一般用途運算放大器

下載觀看有字幕稿的影片影片