首頁 放大器 運算放大器 (op amps) 一般用途運算放大器
首頁
放大器
運算放大器 (op amps)
一般用途運算放大器

LM248

現行

操作溫度範圍為 -25°C 至 85°C 的四路、36V、1MHz 運算放大器

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
具備升級功能，可直接投入使用替代所比較的裝置。
LM324B 現行 四路、36V 1.2MHz 3mV 補償電壓運算放大器 Higher GBW (1.2 MHz), lower offset voltage (3 mV), lower power (0.175 mA), lower noise (35 nV/√Hz), higher output current (40 mA), wider temp range (-40 to 85)

LM248

現行
立即訂購

產品詳細資料

Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 8 Rail-to-rail No GBW (typ) (MHz) 1 Slew rate (typ) (V/µs) 0.5 Vos (offset voltage at 25°C) (max) (mV) 6 Iq per channel (typ) (mA) 0.6 Vn at 1 kHz (typ) (nV√Hz) 60 Rating Catalog Operating temperature range (°C) -25 to 85 Offset drift (typ) (µV/°C) 15 Input bias current (max) (pA) 200000 CMRR (typ) (dB) 90 Iout (typ) (A) 0.025 Architecture Bipolar Input common mode headroom (to negative supply) (typ) (V) 3 Input common mode headroom (to positive supply) (typ) (V) -3 Output swing headroom (to negative supply) (typ) (V) 2 Output swing headroom (to positive supply) (typ) (V) -2
Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 36 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 8 Rail-to-rail No GBW (typ) (MHz) 1 Slew rate (typ) (V/µs) 0.5 Vos (offset voltage at 25°C) (max) (mV) 6 Iq per channel (typ) (mA) 0.6 Vn at 1 kHz (typ) (nV√Hz) 60 Rating Catalog Operating temperature range (°C) -25 to 85 Offset drift (typ) (µV/°C) 15 Input bias current (max) (pA) 200000 CMRR (typ) (dB) 90 Iout (typ) (A) 0.025 Architecture Bipolar Input common mode headroom (to negative supply) (typ) (V) 3 Input common mode headroom (to positive supply) (typ) (V) -3 Output swing headroom (to negative supply) (typ) (V) 2 Output swing headroom (to positive supply) (typ) (V) -2
SOIC (D) 14 51.9 mm² (8.65 mm × 6 mm) PDIP (N) 14 181.42 mm² (19.3 mm × 9.4 mm)
  • µA741 Operating Characteristics
  • Low Supply-Current Drain . . . 0.6 mA Typ (per amplifier)
  • Low Input Offset Voltage
  • Low Input Offset Current
  • Class AB Output Stage
  • Input/Output Overload Protection
  • Designed to Be Interchangeable With Industry Standard LM148, LM248, and LM348
  • µA741 Operating Characteristics
  • Low Supply-Current Drain . . . 0.6 mA Typ (per amplifier)
  • Low Input Offset Voltage
  • Low Input Offset Current
  • Class AB Output Stage
  • Input/Output Overload Protection
  • Designed to Be Interchangeable With Industry Standard LM148, LM248, and LM348

The LM148, LM248, and LM348 are quadruple, independent, high-gain, internally compensated operational amplifiers designed to have operating characteristics similar to the µA741. These amplifiers exhibit low supply-current drain and input bias and offset currents that are much less than those of the µA741.

The LM148, LM248, and LM348 are quadruple, independent, high-gain, internally compensated operational amplifiers designed to have operating characteristics similar to the µA741. These amplifiers exhibit low supply-current drain and input bias and offset currents that are much less than those of the µA741.
filter 尋找其它 一般用途運算放大器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 29
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LM148, LM248, LM348 Quadruple Operational Amplifiers datasheet (Rev. C) 2002/2/11
應用說明 AN-31 Amplifier Circuit Collection (Rev. D) PDF | HTML 2020/10/21
電子書 The Signal e-book: A compendium of blog posts on op amp design topics PDF | HTML 2017/3/28
應用說明 Building an Op Amp With Bipolar Transistors, A Historical Application Note (Rev. A) 2016/9/19
應用說明 AN-256 Circuitry for Inexpensive Relative Humidity Measurement (Rev. B) 2013/5/6
應用說明 Super Matched Bipolar Transistor Pair Sets New Standards for Drift and Noise (Rev. B) 2013/5/5
應用說明 AN-260 A 20-Bit (1 ppm) Linear Slope-Integrating A/D Converter (Rev. B) 2013/5/5
應用說明 AN-30 Log Converters (Rev. B) 2013/5/1
應用說明 AN-29 IC Op Amp Beats FETs on Input Current (Rev. B) 2013/5/1
應用說明 AN-20 An Applications Guide for Op Amps (Rev. C) 2013/5/1
應用說明 AN-4 Monolithic Op Amp—The Universal Linear Component (Rev. B) 2013/5/1
應用說明 AN-79 IC Preamplifier Challenges Choppers on Drift (Rev. B) 2013/5/1
應用說明 AN-278 Designing with a New Super Fast Dual Norton Amplifier (Rev. B) 2013/4/23
應用說明 AN-263 Sine Wave Generation Techniques (Rev. C) 2013/4/22
應用說明 Applying a New Precision Op Amp 2004/10/4
應用說明 AN-46 The Phase Locked Loop IC as a Communication System Building Block 2004/5/14
應用說明 AN-480 A 40 MHz Programmable Video Op Amp 2004/5/11
應用說明 AN-32 FET Circuit Applications 2004/5/10
應用說明 AN-446 A 150W IC Op Amp Simplifies Design of Power Circuits 2004/5/10
應用說明 AN-24 A Simplified Test Set for Op Amp Characterization 2004/5/10
應用說明 AN-241 Working with High Impedance Op Amps 2004/5/3
應用說明 Audio Applications of Linear Integrated Circuits 2004/5/2
應用說明 Predicting Op Amp Slew Rate Limited Response 2002/10/7
應用說明 General Purpose Power Supply 2002/10/3
應用說明 Get Fast Stable Response From Improved Unity-Gain Followers 2002/10/2
應用說明 Get More Power Out of Dual or Quad Op-Amps 2002/10/2
應用說明 Precise Tri-Wave Generation 2002/10/2
應用說明 Low Drift Amplifiers 2002/10/2
應用說明 True RMS Detector 2002/10/1

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

AMP-PDK-EVM — 放大器性能開發套件評估模組

放大器性能開發套件 (PDK) 是一款評估模組 (EVM) 套件，可測試通用運算放大器 (op amp) 參數，並與大多數運算放大器和比較器相容。EVM 套件提供主板和多個插槽式子卡選項，可滿足封裝需求，使工程師能夠快速評估和驗證裝置性能。

AMP-PDK-EVM 套件支援五種最熱門的業界標準封裝，包括：

  • D (SOIC-8 和 SOIC-14)
  • PW (TSSOP-14)
  • DGK (VSSOP-8)
  • DBV (SOT23-5 和 SOT23-6)
  • DCK (SC70-5 和 SC70-6)
使用指南: PDF | HTML
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (D) 14 Ultra Librarian
PDIP (N) 14 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片