首頁 隔離 光電模擬器
首頁
隔離
光電模擬器

ISOM8600

現行

功能隔離、DC 輸入、常開輸出，單通道隔離式開關光電模擬器

立即訂購
產品規格表

ISOM8600

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Product type Solid-state relay output Input type DC Output type Solid-state relay Withstand isolation voltage (VISO) (Vrms) 500 Number of channels 1 Forward voltage (typ) (V) 1.3 Forward current (IF) (max) (mA) 20 Forward current (IF) (min) (µA) 800 Operating temperature range (°C) -55 to 125 Turnon time (enable) (µs) 200 Turnoff time (disable) (µs) 200 Creepage (min) (mm) 5 Clearance (min) (mm) 5
Rating Catalog Product type Solid-state relay output Input type DC Output type Solid-state relay Withstand isolation voltage (VISO) (Vrms) 500 Number of channels 1 Forward voltage (typ) (V) 1.3 Forward current (IF) (max) (mA) 20 Forward current (IF) (min) (µA) 800 Operating temperature range (°C) -55 to 125 Turnon time (enable) (µs) 200 Turnoff time (disable) (µs) 200 Creepage (min) (mm) 5 Clearance (min) (mm) 5
SOIC (DFG) 4 24.57 mm² (3.51 mm × 7 mm)
  • Drop-in replacement and pin-to-pin upgrade to industry-standard photorelays
  • Single-channel, diode-emulator input
  • Single-pole, normally-open, symmetrical 80V output switch
  • Primary-side current controlled switch, no additional isolated high voltage supply required for 80V switching
  • Ultra-low off-state leakage at VOFF = 70V
    • < 250nA at operating temperature of 25°C
    • < 1µA across operating temperature of –55°C to 125°C
  • Fast Response time: 10µs (typical) at IF = 5mA, VCC = 20V, RL = 200Ω, CL = 50pF
  • Ultra-low input trigger current of 800µA (at 25°C)
  • Functional isolation : 500VRMS Working voltage

  • Supports Industrial Temperature Range: –55°C to 125°C

  • Small SO-4 package
  • Drop-in replacement and pin-to-pin upgrade to industry-standard photorelays
  • Single-channel, diode-emulator input
  • Single-pole, normally-open, symmetrical 80V output switch
  • Primary-side current controlled switch, no additional isolated high voltage supply required for 80V switching
  • Ultra-low off-state leakage at VOFF = 70V
    • < 250nA at operating temperature of 25°C
    • < 1µA across operating temperature of –55°C to 125°C
  • Fast Response time: 10µs (typical) at IF = 5mA, VCC = 20V, RL = 200Ω, CL = 50pF
  • Ultra-low input trigger current of 800µA (at 25°C)
  • Functional isolation : 500VRMS Working voltage

  • Supports Industrial Temperature Range: –55°C to 125°C

  • Small SO-4 package

The ISOM8600 is an 80V single-pole, normally-open switch with an opto-emulator input. The opto-emulator inputs control the back-to-back MOSFETs without any power supply required on the secondary side. The devices are pin-compatible and drop-in replaceable for many traditional optocouplers, allowing enhancement to industry-standard packages with no PCB redesign.

The ISOM8600 opto-emulator switch offers significant reliability and performance advantages compared to optocouplers, like wider temperature ranges and tight process controls resulting in small part-to-part variations. Since there is no aging effect to compensate for, the emulated diode-input stage consumes less power than optocouplers that have LED aging and require higher bias currents over the device lifetime. ISOM8600 switch output can be controlled by just 0.8mA current through anode/cathode pins over the lifetime of the device, enabling system power savings.

The ISOM8600 is offered in a small SO-4 package, supporting a 500VRMS functional isolation. The high performance and reliability of the device enable the devices use in applications like Building automation, Factory automation, Semiconductor test, I/O modules in industrial controllers, factory automation applications, and more spaces.

The ISOM8600 is an 80V single-pole, normally-open switch with an opto-emulator input. The opto-emulator inputs control the back-to-back MOSFETs without any power supply required on the secondary side. The devices are pin-compatible and drop-in replaceable for many traditional optocouplers, allowing enhancement to industry-standard packages with no PCB redesign.

The ISOM8600 opto-emulator switch offers significant reliability and performance advantages compared to optocouplers, like wider temperature ranges and tight process controls resulting in small part-to-part variations. Since there is no aging effect to compensate for, the emulated diode-input stage consumes less power than optocouplers that have LED aging and require higher bias currents over the device lifetime. ISOM8600 switch output can be controlled by just 0.8mA current through anode/cathode pins over the lifetime of the device, enabling system power savings.

The ISOM8600 is offered in a small SO-4 package, supporting a 500VRMS functional isolation. The high performance and reliability of the device enable the devices use in applications like Building automation, Factory automation, Semiconductor test, I/O modules in industrial controllers, factory automation applications, and more spaces.
filter 尋找其它 光電模擬器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
ISOM8610 現行 DC 輸入、常開輸出、單通道隔離式開關光電模擬器 Certified 3.75kV isolation

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 6
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 ISOM8600 80V, 150mA Functionally Isolated Normally Open Opto-emulator Switch With Integrated FETs datasheet PDF | HTML 2024/6/24
Application brief Using TI Opto-emulator to Achieve High Speed and High Reliability Digital Output Applications PDF | HTML 2026/1/30
技術文章 光電模擬器說明：為何您應該升級光耦合器技術 (Rev. A) PDF | HTML Download English Version (Rev.A) PDF | HTML 2025/7/9
Product overview Upgrade photoMOS, SSR and Push-Pull, Totem-Pole, or Transistor Output Optocouplers With Opto-emulators (Rev. A) PDF | HTML 2025/6/19
Product overview Upgrading Relays With Opto-Emulator Switch PDF | HTML 2024/4/17
Application brief Demystifying Isolation Certification Standards: Optocouplers vs Opto-emulators PDF | HTML 2023/10/19

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ISOM-EVM — 通用光學模擬器評估模組

ISOM-EVM 支援評估採用 5 針腳 DFF、4 針腳 DFG、4 針腳 DFH 和 4 針腳 DFS SOIC 封裝的 TI 光電模擬器。透過變更 EVM 配置和元件值即可重新配置評估模組 (EVM)，以評估不同光電模擬器、不同輸入訊號或其他應用。EVM 在電路板上並未安裝光學模擬器 IC，讓使用者可安裝自己選擇的相容 IC。使用者可將電路板分成三個獨立單元，以個別測試印刷電路板。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

ISOM8610DFGEVM — ISOM8610 評估模組

ISOM8610DFGEVM 支援 ISOM8610 評估，這是一款採用四針腳 DFG SOIC 封裝，且配備整合式 FET 的單通道光學模擬器。評估模組可協助設計人員評估裝置性能，為隔離式系統提供快速開發與分析。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (DFG) 4 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片