首頁 隔離 數位隔離器
首頁
隔離
數位隔離器

ISO7021

現行

Ultra-low power, basic 2-channel, 1/1, digital isolator with 120uA/ch Icc and ATEX certification

立即訂購
產品規格表

ISO7021

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Integrated isolated power No Number of channels 2 Forward/reverse channels 1 forward / 1 reverse Data rate (max) (Mbps) 4 Protocols GPIO, PWM, UART SPI frequency (max) (MHz) 1.5 Propagation delay time (typ) (ns) 140 Propagation delay time (max) (ns) 165 Part-to-part output skew (max) (ns) 70 Pulse-width distortion (t(PHL) - t(PLH)) (max) (ns) 10 Channel-to-channel output skew (max) (ns) 10 Certifications ATEX, CQC, CSA, DIN, IECE, TUV Isolation rating Basic Working isolation voltage (VIOWM) (Vrms) 400 Withstand isolation voltage (VISO) (Vrms) 3000 Surge isolation voltage (VIOSM) (kVPK) 6.4 CMTI (min) (kV/µs) 50 Default output High, Low Creepage (min) (mm) 3.7 Current consumption per channel (DC) (typ) (mA) 0.00475 Current consumption per channel (1 Mbps) (typ) (mA) 0.12 Operating temperature range (°C) -55 to 125 Transient isolation voltage (VIOTM) (VPK) 4242 Clearance (min) (mm) 3.7
Rating Catalog Integrated isolated power No Number of channels 2 Forward/reverse channels 1 forward / 1 reverse Data rate (max) (Mbps) 4 Protocols GPIO, PWM, UART SPI frequency (max) (MHz) 1.5 Propagation delay time (typ) (ns) 140 Propagation delay time (max) (ns) 165 Part-to-part output skew (max) (ns) 70 Pulse-width distortion (t(PHL) - t(PLH)) (max) (ns) 10 Channel-to-channel output skew (max) (ns) 10 Certifications ATEX, CQC, CSA, DIN, IECE, TUV Isolation rating Basic Working isolation voltage (VIOWM) (Vrms) 400 Withstand isolation voltage (VISO) (Vrms) 3000 Surge isolation voltage (VIOSM) (kVPK) 6.4 CMTI (min) (kV/µs) 50 Default output High, Low Creepage (min) (mm) 3.7 Current consumption per channel (DC) (typ) (mA) 0.00475 Current consumption per channel (1 Mbps) (typ) (mA) 0.12 Operating temperature range (°C) -55 to 125 Transient isolation voltage (VIOTM) (VPK) 4242 Clearance (min) (mm) 3.7
SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm)
  • Ultra-low power consumption
    • 4.8µA per channel quiescent current (3.3V)
    • 15µA per channel at 100kbps (3.3V)
    • 120µA per channel at 1Mbps (3.3V)
  • Robust isolation barrier
    • >100-year projected lifetime
    • 3000VRMS isolation rating
    • ±100kV/µs typical CMTI
  • Wide supply range: 1.71V to 1.89V and 2.25V to 5.5V
  • Wide temperature range: –55°C to 125°C
  • Small 8-SOIC package (8-D)
  • Signaling rate: Up to 4Mbps
  • Default output High (ISO7021) and Low (ISO7021F) options
  • Robust electromagnetic compatibility (EMC)
    • System-level ESD, EFT, and surge immunity
    • ±8kV IEC 61000-4-2 contact discharge protection across isolation barrier
    • Very low emissions
  • Safety-related certifications:
    • DIN EN IEC 60747-17 (VDE 0884-17)
    • UL 1577 Component Recognition Program
    • IEC 62368-1, IEC 61010-1 and GB 4943.1
    • IECEx (IEC 60079-0 & IEC 60079-11) and ATEX (EN IEC60079-0 & EN 60079-11)
  • Ultra-low power consumption
    • 4.8µA per channel quiescent current (3.3V)
    • 15µA per channel at 100kbps (3.3V)
    • 120µA per channel at 1Mbps (3.3V)
  • Robust isolation barrier
    • >100-year projected lifetime
    • 3000VRMS isolation rating
    • ±100kV/µs typical CMTI
  • Wide supply range: 1.71V to 1.89V and 2.25V to 5.5V
  • Wide temperature range: –55°C to 125°C
  • Small 8-SOIC package (8-D)
  • Signaling rate: Up to 4Mbps
  • Default output High (ISO7021) and Low (ISO7021F) options
  • Robust electromagnetic compatibility (EMC)
    • System-level ESD, EFT, and surge immunity
    • ±8kV IEC 61000-4-2 contact discharge protection across isolation barrier
    • Very low emissions
  • Safety-related certifications:
    • DIN EN IEC 60747-17 (VDE 0884-17)
    • UL 1577 Component Recognition Program
    • IEC 62368-1, IEC 61010-1 and GB 4943.1
    • IECEx (IEC 60079-0 & IEC 60079-11) and ATEX (EN IEC60079-0 & EN 60079-11)

The ISO7021 device is an ultra-low power, multichannel digital isolator that can be used to isolate CMOS or LVCMOS digital I/Os. Each isolation channel has a logic input and output buffer separated by a double capacitive silicon dioxide (SiO2) insulation barrier. Innovative edge based architecture combined with an ON-OFF keying modulation scheme allows these isolators to consume very-low power while meeting 3000VRMS isolation rating per UL1577. The per channel dynamic current consumption of the device is under 120µA/Mbps and the per channel static current consumption is 4.8µA at 3.3V, allowing for use of the ISO7021 in both power and thermal constrained system designs.

The device can operate as low as 1.71V, as high as 5.5V , and is fully functional with different supply voltages on each side of isolation barrier. The two-channel isolator comes in a narrow body 8-SOIC package with one forward and one reverse-direction channel in a 8-SOIC package. The device has default output high and low options. If the input power or signal is lost, default output is high for the ISO7021 device without the suffix F and low for the ISO7021F device with the F suffix. See the Device Functional Modes section for more information.

The ISO7021 device is an ultra-low power, multichannel digital isolator that can be used to isolate CMOS or LVCMOS digital I/Os. Each isolation channel has a logic input and output buffer separated by a double capacitive silicon dioxide (SiO2) insulation barrier. Innovative edge based architecture combined with an ON-OFF keying modulation scheme allows these isolators to consume very-low power while meeting 3000VRMS isolation rating per UL1577. The per channel dynamic current consumption of the device is under 120µA/Mbps and the per channel static current consumption is 4.8µA at 3.3V, allowing for use of the ISO7021 in both power and thermal constrained system designs.

The device can operate as low as 1.71V, as high as 5.5V , and is fully functional with different supply voltages on each side of isolation barrier. The two-channel isolator comes in a narrow body 8-SOIC package with one forward and one reverse-direction channel in a 8-SOIC package. The device has default output high and low options. If the input power or signal is lost, default output is high for the ISO7021 device without the suffix F and low for the ISO7021F device with the F suffix. See the Device Functional Modes section for more information.
filter 尋找其它 數位隔離器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
具備升級功能，可直接投入使用替代所比較的裝置。
最新 ISO6021 預覽 具 0.4mA/ch Icc、200Mbps 的低功率與傳播延遲、強化型 2 通道、1/1 數位隔離器 Pin-to-pin performance upgrade; 25Mhz SPI for precision applications

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 17
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 ISO7021 Ultra-Low Power Two-Channel Digital Isolator datasheet (Rev. C) PDF | HTML 2024/5/20
證書 VDE Certificate for Reinforced Isolation for DIN EN IEC 60747-17 (Rev. AB) 2026/7/15
證書 TUV Certificate for Isolation Devices (Rev. M) 2026/5/7
證書 UL Certificate of Compliance File E181974 Vol 4 Sec 6 (Rev. S) 2026/5/7
應用說明 Construction and Marking Report for ATEX / IECEx Certification (Rev. A) PDF | HTML 2025/12/2
白皮書 Improve Your System Performance by Replacing Optocouplers with Digital Isolators (Rev. D) PDF | HTML 2025/11/7
證書 ISO7041 Written Attestation of Conformity PDF | HTML 2025/9/10
證書 CQC Certificate for ISOxxD (Rev. B) 2025/8/19
證書 CSA Certificate for ISO7021D 2023/3/24
白皮書 Why are Digital Isolators Certified to Meet Electrical Equipment Standards? 2021/11/16
應用說明 Intrinsic Safety Compliance of Digital Isolators in Explosive Atmospheres (Rev. A) 2021/8/25
白皮書 Distance Through Insulation: How Digital Isolators Meet Certification Requiremen PDF | HTML 2021/6/11
技術文章 Upgrade your explosive atmosphere designs with IECEx-certified digital isolators PDF | HTML 2020/11/6
證書 ATEX Certificate for Explosive Atmospheres: CSANe 20ATEX2090U 2020/8/19
證書 IECEx Certificate for Explosive Atmospheres: IECEx CSA 20.0012U 2020/8/14
技術文章 Staying on budget: How digital isolators are transforming field transmitters PDF | HTML 2019/5/24
設計指南 Isolated power and data interface for low-power applications reference design 2019/1/30

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DIGI-ISO-EVM — 通用數位隔離器評估模組

DIGI-ISO-EVM 是一款評估模組 (EVM)，可評估任何 TI 單通道、雙通道、三通道、四通道或六通道數位隔離器裝置，並提供五種不同封裝 - 8 接腳窄體 SOIC (D)、8 接腳寬體 SOIC (DWV)、16 接腳寬體 SOIC (DWW)、16 接腳超寬體 SOIC (DWW) 和 16 接腳 (DBQ) 封裝。EVM 具備足夠 Berg 接腳選項，可用於評估具最少外部零組件的裝置。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

ISO7041DBQEVM — 採用 DBQ 封裝的 ISO7041 低功耗四通道數位隔離器的評估模組

ISO7041DBQEVM 是一款評估模組 (EVM)，可用於評估採用 16 接腳 SSOP 封裝（封裝代碼，DBQ）的 ISO7041 低功耗四通道數位隔離器。EVM 具有足夠的測試點、跳線選項和電流感應功能，讓您能夠使用最少的外部零組即可件評估設備。
使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (D) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片