產品詳細資料

Relative humidity accuracy (typ) (%RH) 0.5 Temperature accuracy (typ) (°C) 0.1 Relative humidity operating range (typ) (%RH) 0 to 100 Average supply current (typ) (µA) 0.4 Operating temperature range (°C) -40 to 125 Interface type I2C Rating Catalog
Relative humidity accuracy (typ) (%RH) 0.5 Temperature accuracy (typ) (°C) 0.1 Relative humidity operating range (typ) (%RH) 0 to 100 Average supply current (typ) (µA) 0.4 Operating temperature range (°C) -40 to 125 Interface type I2C Rating Catalog
WSON (DEJ) 8 6.25 mm² (2.5 mm × 2.5 mm)
  • Relative humidity (RH) sensor:
    • Operating range: 0% to 100%
    • Accuracy: ±0.5% typical
    • Offset Error Correction: reduces offset to return device to within accuracy specification
    • Long-term drift: 0.19%RH/yr
    • Condensation protection with integrated heater
  • Temperature sensor:
    • Operating range: –40°C to 125°C
    • Accuracy: ±0.1°C typical
    • Long-term drift: ±0.03°C/yr
  • NIST traceability: relative humidity & temperature
  • Output Short Circuit Protection

  • Low power: average current 0.4µA
  • I2C interface compatibility up to 1MHz speeds
    • Four selectable I2C addresses
    • Data protection through CRC checksum
  • Supply voltage: 1.62V to 5.50V
  • Available auto measurement mode
  • Programmable interrupts
  • Programmable RH and Temp measurement offset
  • Factory-installed polyimide tape assembly cover
  • Factory-installed IP67 rated environmental cover
  • Relative humidity (RH) sensor:
    • Operating range: 0% to 100%
    • Accuracy: ±0.5% typical
    • Offset Error Correction: reduces offset to return device to within accuracy specification
    • Long-term drift: 0.19%RH/yr
    • Condensation protection with integrated heater
  • Temperature sensor:
    • Operating range: –40°C to 125°C
    • Accuracy: ±0.1°C typical
    • Long-term drift: ±0.03°C/yr
  • NIST traceability: relative humidity & temperature
  • Output Short Circuit Protection

  • Low power: average current 0.4µA
  • I2C interface compatibility up to 1MHz speeds
    • Four selectable I2C addresses
    • Data protection through CRC checksum
  • Supply voltage: 1.62V to 5.50V
  • Available auto measurement mode
  • Programmable interrupts
  • Programmable RH and Temp measurement offset
  • Factory-installed polyimide tape assembly cover
  • Factory-installed IP67 rated environmental cover

The HDC302x is an integrated, capacitive based relative humidity (RH) and temperature sensor . The device provides high accuracy measurements over a wide supply range (1.62V – 5.5V) and ultra low power consumption in a compact 2.5mm × 2.5mm × 0.8mm WSON 8-pin package. Both the temperature and humidity sensors are 100% tested and trimmed on a production setup that is NIST traceable and verified with equipment that is calibrated to ISO/IEC 17025 standards.

Offset Error Correction reduces RH sensor offset due to aging, exposure to extreme operating conditions, and contaminants to return device to within accuracy specifications. For battery IoT applications, auto measurement mode and ALERT feature enable low system power by maximizing MCU sleep time. There are four different I2C addresses that support speeds up to 1MHz. A heater is available to dissipate condensation and moisture.

The HDC3020 is an open cavity package without protective cover. Two device variants have a cover option to protect the open cavity RH sensor: HDC3021 and HDC3022. HDC3021 has removable protective tape to allow conformal coatings and PCB wash. HDC3022 has a permanent IP67 filter membrane to protect against dust and water condensation.

The HDC302x is an integrated, capacitive based relative humidity (RH) and temperature sensor . The device provides high accuracy measurements over a wide supply range (1.62V – 5.5V) and ultra low power consumption in a compact 2.5mm × 2.5mm × 0.8mm WSON 8-pin package. Both the temperature and humidity sensors are 100% tested and trimmed on a production setup that is NIST traceable and verified with equipment that is calibrated to ISO/IEC 17025 standards.

Offset Error Correction reduces RH sensor offset due to aging, exposure to extreme operating conditions, and contaminants to return device to within accuracy specifications. For battery IoT applications, auto measurement mode and ALERT feature enable low system power by maximizing MCU sleep time. There are four different I2C addresses that support speeds up to 1MHz. A heater is available to dissipate condensation and moisture.

The HDC3020 is an open cavity package without protective cover. Two device variants have a cover option to protect the open cavity RH sensor: HDC3021 and HDC3022. HDC3021 has removable protective tape to allow conformal coatings and PCB wash. HDC3022 has a permanent IP67 filter membrane to protect against dust and water condensation.

下載 觀看有字幕稿的影片 影片

索取更多資訊

提供 NIST 校準文件。立即索取

您可能會感興趣的類似產品

open-in-new 比較替代產品
具備升級功能,可直接投入使用替代所比較的裝置。
HDC3020 現行 0.5% RH 數位濕度感測器、0.19% 長期偏移、400 nA、4 秒回應時間、NIST 可追蹤 Open cavity, same functionality and accuracy
HDC3022-Q1 現行 具有永久式 IP67 濾波器的車用 0.5% RH 數位濕度感測器 Automotive (Q100) qualified version, pin/software compatible
HDC3021 現行 具有可移除式膠膜上蓋的 0.5% RH 數位濕度感測器 Tape cover, same functionality and accuracy
功能相似於所比較的產品。
HDC2010 現行 2% RH 超小型、低功耗數位相對濕度感測器 Ultrasmall 1.5-mm x 1.5-mm package

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 18
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 HDC302x 0.5%RH Digital Relative Humidity Sensor, 0.19%RH/yr Long Term Drift, 4s Response, Low-Power, Offset Error Correction, 0.1°C Temperature Sensor datasheet (Rev. D) PDF | HTML 2024/7/24
* 使用指南 HDC302x Silicon Users Guide (Rev. D) PDF | HTML 2025/2/18
應用說明 How to Use the Integrated Heater to Mitigate RH Drift PDF | HTML 2026/5/1
應用說明 A Simple, Java-Based CRC Calculator PDF | HTML 2026/3/4
Product overview Humidity Sensor Comparison Guide PDF | HTML 2026/1/2
應用說明 TI Humidity Sensors: Programming & Integration Guide PDF | HTML 2025/11/3
應用說明 How to Debug RH Accuracy Issues in RH Sensors PDF | HTML 2025/10/30
應用說明 Humidity Sensor-Based Water Ingress Monitoring for Automotive Electronics (Rev. A) PDF | HTML 2025/8/5
Product overview NIST Traceability for Temperature and Humidity Sensors PDF | HTML 2025/4/15
Application brief How TI Humidity Sensors Remove Device Condensation Using On-Chip Heaters PDF | HTML 2023/2/10
Application brief Using RH to Derive Vapor Pressure, Dew Point, Absolute Humidity, and Enthalpy PDF | HTML 2023/2/9
Application brief Improving System Reliability in Auto and Ind. Cameras w/ AccurateTemp. Sensing PDF | HTML 2022/1/3
白皮書 85°C/85% RH Accelerated Life Test Impact on Humidity Sensors (Rev. A) PDF | HTML 2021/9/7
Application brief Leveraging Relative Humidity Sensor Enhanced Features for Ultra-Low-Power System (Rev. A) PDF | HTML 2021/9/1
Application brief How the HDC3020 Humidity Sensor Family Achieves The Industry's Lowest Drift (Rev. A) PDF | HTML 2021/8/31
技術文章 Why long-term consistent performance matters for relative humidity sensors PDF | HTML 2021/6/21
技術文章 How accurate sensing in HVAC systems improves efficiency and saves consumers money PDF | HTML 2021/1/26
技術文章 Interface to sensors in seconds with ASC Studio PDF | HTML 2020/11/12

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

HDC3020EVM — 適用於溫度和濕度感測器的 HDC3020 耗評估模組

設計人員可利用 HDC3020EVM 評估模組 (EVM) 評估 HDC3020 相對濕度及溫度感測器的操作和性能。此 EVM 託管 MSP430F5528 微控制器 (µC) 以及 HDC3020。µC 用於控制 HDC3020 並透過 USB 埠與主機 PC 通訊。如有必要 EVM 的設計可分成兩個部分。穿孔允許使用者中斷 HDC3020 的連接,以靈活地進行評估。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

HDC3020FLXEVM — HDC3020 柔性印刷電路評估模組

HDC3020FLXEVM 是柔性印刷電路 (FPC) 架構的分接感測器電路板。其讓使用者可在精巧易用的電路板上,評估 HDC3020 數位相對濕度 (RH) 和溫度感測器的性能。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WSON (DEJ) 8 Ultra Librarian

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片系列

觀看所有影片

影片