產品詳細資料

Protocols DP1.2, USB 3.0, USB 3.2 Gen 1x1, USB-C Configuration 4:6 Number of channels 1 USB speed (Mbps) 5000 Bandwidth (MHz) 2700 Ron (typ) (mΩ) 8000 Input/output voltage (min) (V) 0 Input/output voltage (max) (V) 2 Supply current (typ) (µA) 600 ESD HBM (typ) (kV) 4 Operating temperature range (°C) -40 to 85 Off isolation (typ) (dB) -50 OFF-state leakage current (max) (µA) 5 Ron (max) (mΩ) 14000 Turnoff time (disable) (max) (ns) 1000 Turnon time (enable) (max) (ns) 3000 Rating Catalog
Protocols DP1.2, USB 3.0, USB 3.2 Gen 1x1, USB-C Configuration 4:6 Number of channels 1 USB speed (Mbps) 5000 Bandwidth (MHz) 2700 Ron (typ) (mΩ) 8000 Input/output voltage (min) (V) 0 Input/output voltage (max) (V) 2 Supply current (typ) (µA) 600 ESD HBM (typ) (kV) 4 Operating temperature range (°C) -40 to 85 Off isolation (typ) (dB) -50 OFF-state leakage current (max) (µA) 5 Ron (max) (mΩ) 14000 Turnoff time (disable) (max) (ns) 1000 Turnon time (enable) (max) (ns) 3000 Rating Catalog
WQFN (RNH) 30 11.25 mm² (4.5 mm × 2.5 mm) WQFN (RHR) 28 19.25 mm² (5.5 mm × 3.5 mm)
  • Provides MUX Solution for USB Type-C™ Ecosystem Including Alternate Mode (AM)
  • Provides Wide Channel Selection Choices Including USBSS and 2 Ch AM, 4 Ch AM
  • Compatible with 5 Gbps USB3.1 Gen 1 and AM Including 5.4 Gbps DisplayPort 1.2a
  • Compatible for Source/Host and Sink/Device Applications
  • Provides Cross-point MUX for Low Speed SBU Pins
  • Bidirectional "Mux/De-Mux" Differential Switch
  • Supports Common Mode Voltage 0-2 V
  • Low Power with 1-µA Shutdown and 0.6 mA Active
  • Single Supply Voltage VCC of 3.3 V ±10%
  • Industrial Temperature Range of –40 to 85°C
  • Provides MUX Solution for USB Type-C™ Ecosystem Including Alternate Mode (AM)
  • Provides Wide Channel Selection Choices Including USBSS and 2 Ch AM, 4 Ch AM
  • Compatible with 5 Gbps USB3.1 Gen 1 and AM Including 5.4 Gbps DisplayPort 1.2a
  • Compatible for Source/Host and Sink/Device Applications
  • Provides Cross-point MUX for Low Speed SBU Pins
  • Bidirectional "Mux/De-Mux" Differential Switch
  • Supports Common Mode Voltage 0-2 V
  • Low Power with 1-µA Shutdown and 0.6 mA Active
  • Single Supply Voltage VCC of 3.3 V ±10%
  • Industrial Temperature Range of –40 to 85°C

The HD3SS460 is a high-speed bi-directional passive switch in mux or demux configurations. Based on control pin POL the device provides switching to accommodate connector flipping. The device also provides muxing between 2Ch Data / 2Ch Video and all 4Ch Video based on control pin AMSEL.

The device also provides cross points MUX for low speed pins as needed in flippable connector implementation.

The HD3SS460 is a generic analog differential passive switch that can work for any high speed interface applications as long as it is biased at a common mode voltage range of 0-2V and has differential signaling with differential amplitude up to 1800mVpp. It employs an adaptive tracking that ensures the channel remains unchanged for entire common mode voltage range.

Excellent dynamic characteristics of the device allow high speed switching with minimum attenuation to the signal eye diagram with very little added jitter. It consumes <2 mW of power when operational and <5µW in shutdown mode, exercisable by EN pin.

The HD3SS460 is a high-speed bi-directional passive switch in mux or demux configurations. Based on control pin POL the device provides switching to accommodate connector flipping. The device also provides muxing between 2Ch Data / 2Ch Video and all 4Ch Video based on control pin AMSEL.

The device also provides cross points MUX for low speed pins as needed in flippable connector implementation.

The HD3SS460 is a generic analog differential passive switch that can work for any high speed interface applications as long as it is biased at a common mode voltage range of 0-2V and has differential signaling with differential amplitude up to 1800mVpp. It employs an adaptive tracking that ensures the channel remains unchanged for entire common mode voltage range.

Excellent dynamic characteristics of the device allow high speed switching with minimum attenuation to the signal eye diagram with very little added jitter. It consumes <2 mW of power when operational and <5µW in shutdown mode, exercisable by EN pin.

下載 觀看有字幕稿的影片 影片

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

HD3SS460EVM-SRC — HD3SS460EVM-SRC 高速被動交叉點開關評估模組

HD3SS460 是一款高速被動交叉點開關,設計用於支援具備替代 (ALT) 模式應用的 USB Type-C™ 所需的低速與高速訊號切換。HD3SS460-EVM-SRC 評估模組 (EVM) 隨附傳統 USB 插座以連接傳統 USB 系統,以及 DisplayPort 插座以連接支援 DisplayPort 的來源。不含板載 CC/PD 控制器。電路板配備測試排針,可用於將 CC 與其他必要訊號連接至外部 Type-C 控制器,以評估 Type-C 實作。

使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

USB-CTM-MINIDK-EVM — 支援視訊和充電的 USB Type-C™ 迷你底座電路板評估模組

USB Type-C™ 電力傳輸 (PD) MiniDock 評估模組 (EVM) 提供完整的 USB Type-C 擴充基座參考解決方案,包含音訊、USB 資料傳輸、電源及視訊功能。  該 EVM 採用 2 吋 × 4 吋的小型化設計尺寸,並透過主 USB Type-C PD 連接埠同時支援供電與汲取功能。視訊輸出功能包括 DisplayPort 和 HDMI。

支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

HD3SS460 S-Parameter Model

SLLR056.ZIP (453 KB) - S 參數模型
支援產品和硬體
參考設計

PMP40154 — 具有 HDMI 輸出的 USB Type-C™ 和 USB PD DRP 參考設計

PMP40154 是真正的 USB Type-C™ 和 USB PD DRP 參考設計。  此參考設計支援 USB Type-C™ 輸入至 HDMI 輸出顯示。本設計實作了 USB PD 控制器與電源開關 TPS65986,以及替代模式多工器 HD3SS460。完全相容所有標準 USB Type-C™ 產品,並向下相容傳統裝置與轉接器。設計中包含多款 IEC ESD 保護裝置(如 TPD8S300、TPD4E02B04 等),可將系統與連接器上的高壓狀態隔離。
支援產品和硬體
參考設計

TIDA-01243 — 具有視訊和充電支援的 USB Type-C™ 和電力傳輸迷你底座參考設計

該 USB Type-C® 供電 (PD) 迷你擴充基座參考設計,提供整合音訊、USB 資料傳輸、電源與視訊功能的 USB Type-C 擴充基座解決方案參考。  此參考設計採用 2 英吋 × 4 英吋的小型化尺寸規格,並透過主要 USB Type-C PD 埠同時支援供電與汲取功能。視訊輸出功能包括 DisplayPort 和 HDMI。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (RNH) 30 Ultra Librarian
WQFN (RHR) 28 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片