DRV8850
- H-Bridge Motor Driver
- Drives a DC Motor, One Winding of a Stepper Motor, or Other Loads
- Low MOSFET On-Resistance: 65 mΩ HS + LS at 4.2V, 25°C
- 5-A Continuous 8-A Peak-Drive Current
- Internal Current Sensing With Current Sense Output
- 2 to 5.5-V Operating Supply Voltage Range
- Overvoltage and Undervoltage Lockout
- Low-Power Sleep Mode
- 100-mA Isolated Low-Dropout (LDO) Voltage Regulator
- 24-Pin VQFN Package
The DRV8850 device provides a motor driver plus LDO voltage regulator solution for consumer products, toys, and other low-voltage or battery-powered motion-control applications. The device has one H-bridge driver to drive a DC motor, a voice-coil actuator, one winding of a stepper motor, a solenoid, or other devices. The output driver block consists of N-channel power MOSFETs configured as an H-bridge to drive the load. An internal charge pump generates the needed gate-drive voltages.
The DRV8850 device supplies up to 5 A of continuous output current (with proper PCB heat sinking) and up to 8-A peak current. It operates on a supply voltage from 2 V to 5.5 V.
A low-dropout linear voltage regulator is integrated with the motor driver to supply power to microcontrollers or other circuits. The LDO voltage regulator can be active in device sleep mode, so that the driver may be shut down without removing power to any devices powered by the LDO voltage regulator.
Internal shutdown functions provide overcurrent, short circuit, undervoltage,
overvoltage, and
overtemperature protection. In addition, the device also has built-in current sensing for
accurate current measurement.
The DRV8850 device is packaged in a 24-pin VQFN
(3.5-mm × 5.5-mm) package (Eco-friendly: RoHS and no Sb/Br).
您可能會感興趣的類似產品
功能相同，但針腳輸出與所比較的裝置不同。
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | DRV8850 Low-Voltage H-Bridge IC With LDO Voltage Regulator datasheet (Rev. D) | PDF | HTML | 2019/10/8 | ||
| Application brief | Advantages of Integrated Current Sensing (Rev. B) | PDF | HTML | 2022/6/20 | |||
| 應用說明 | Best Practices for Board Layout of Motor Drivers (Rev. B) | PDF | HTML | 2021/10/14 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
DRV8850EVM — DRV8850EVM - 具有 LDO 穩壓器的低壓全橋馬達驅動器評估模組
The DRV8850 device provides a motor driver plus LDO voltage regulator solution for applications requiring a high start-up torque with superior thermal performance in mind. The device has one H-bridge driver to drive a DC motor, a voice-coil actuator, one winding of a stepper motor or other types of (...)
TIDA-00602 — 電動牙刷控制器參考設計
此參考設計使用我們的低電壓 H 橋馬達驅動器，整合低壓差 (LDO) 電壓穩壓器和超低功率微控制器 (MCU)，以展示電池供電電動牙刷的完整實作。
TIDA-00616 — 適用於有刷 DC 馬達控制的能源採集 LaunchPad BoosterPack 參考設計
適用有刷 DC 馬達控制的能源採集 LaunchPad 專為以太陽能為鋰離子或鋰聚合物電池充電而設計，且隨後可使用電壓穩壓器為 TI LaunchPad 和任何連接至 LaunchPad 的週邊設備提供二次系統電源。BoosterPack 專為低功率與自動化應用而設計，其使用板載奈米定時器與雙 H 橋馬達驅動器，且前述馬達驅動器具有極低 45mΩ Rds(on) 的整合式 MOSFET。
TIDA-01162 — 整合式與離散式低電壓馬達驅動比較參考設計
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RGY) | 24 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。