DRV8818
- Stepper motor driver
- STEP/DIR Interface
- Built-in microstepping indexer up to 1/8 microstep
- Programmable mixed decay, blanking, and off time
- 8V to 35V operating supply voltage range
- Low 370mΩ (HS + LS) MOSFET RDS(ON) (25°C)
- Up to 2.5A current per winding
- Separate logic supply voltage (VCC)
- HTSSOP-28 pin-to-pin compatible with
- Thermally-enhanced surface mount package
- Protection features
- VM undervoltage lockout (UVLO)
- Overcurrent protection (OCP)
- Thermal shutdown (TSD)
The DRV8818 provides an integrated stepper motor driver for printers, scanners, and other automated equipment applications such as textile machines. The device has two H-bridge drivers, as well as microstepping indexer logic to control a stepper motor.
The output driver block for each consists of N-channel power MOSFETs configured as full H-bridges to drive the motor windings.
A simple STEP/DIRECTION interface allows easy interfacing to controller circuits. The mode pins allow for configuration of the motor in full-step, half-step, quarter-step, or eighth-step modes. Decay mode and PWM off time are programmable.
Internal shutdown functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout and overtemperature.
The DRV8818 is packaged in a 28-pin HTSSOP package with PowerPAD™ integrated circuit package.
您可能會感興趣的類似產品
具備升級功能,可直接投入使用替代所比較的裝置。
功能相同,但針腳輸出與所比較的裝置不同。
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
DRV8818EVM — DRV8818 評估模組
The DRV8818 evaluation module (EVM) demonstrates the capabilities and performance of the DRV8818 integrated micro-stepping motor driver from Texas Instruments. This EVM comes with an on-board MSP430 microprocessor which has been pre-programmed for standalone operation. The regulated voltage for the (...)
SLVC415 — DRV8818 Software
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| HTSSOP (PWP) | 28 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。