首頁 介面 乙太網路 IC 乙太網路 PHY

DP83867IR

現行

工業溫度、穩健 GB 乙太網路 PHY 收發器

產品詳細資料

Datarate (Mbps) 10/100/1000 Interface type GMII, MII, RGMII Rating Catalog Number of ports Single Features Cable diagnostics, EtherCAT, EtherNet/IP, IEEE 1588 SOF, JTAG1149.1, Profinet Supply voltage (V) 1 and 2.5 I/O supply voltage (typ) (V) 1.8, 2.5, 3.3 Operating temperature range (°C) -40 to 85 Number of LEDs 4 ESD HBM (kV) 8
Datarate (Mbps) 10/100/1000 Interface type GMII, MII, RGMII Rating Catalog Number of ports Single Features Cable diagnostics, EtherCAT, EtherNet/IP, IEEE 1588 SOF, JTAG1149.1, Profinet Supply voltage (V) 1 and 2.5 I/O supply voltage (typ) (V) 1.8, 2.5, 3.3 Operating temperature range (°C) -40 to 85 Number of LEDs 4 ESD HBM (kV) 8
HTQFP (PAP) 64 144 mm² 12 x 12 VQFN (RGZ) 48 49 mm² 7 x 7
  • Ultra low RGMII latency TX < 90ns, RX < 290ns
  • Time Sensitive Network (TSN) compliant
  • Low power consumption 457mW
  • Exceeds 8000V IEC 61000-4-2 ESD protection
  • Meets EN55011 class B emission standards
  • 16 programmable RGMII delay modes on RX/TX
  • Integrated MDI termination resistors
  • Programmable MII/GMII/RGMII termination impedance
  • WoL (Wake-on-LAN) packet detection
  • 25MHz or 125MHz synchronized clock output
  • Start of Frame Detect for IEEE 1588 time stamp
  • RJ45 mirror mode
  • Fully compatible to IEEE 802.3 10BASE-Te, 100BASE-TX, and 1000BASE-T Specification
  • Cable diagnostics
  • MII, GMII and RGMII MAC interface options
  • Configurable I/O voltage (3.3V, 2.5V, 1.8V)
  • Fast link drop mode
  • JTAG support
  • Ultra low RGMII latency TX < 90ns, RX < 290ns
  • Time Sensitive Network (TSN) compliant
  • Low power consumption 457mW
  • Exceeds 8000V IEC 61000-4-2 ESD protection
  • Meets EN55011 class B emission standards
  • 16 programmable RGMII delay modes on RX/TX
  • Integrated MDI termination resistors
  • Programmable MII/GMII/RGMII termination impedance
  • WoL (Wake-on-LAN) packet detection
  • 25MHz or 125MHz synchronized clock output
  • Start of Frame Detect for IEEE 1588 time stamp
  • RJ45 mirror mode
  • Fully compatible to IEEE 802.3 10BASE-Te, 100BASE-TX, and 1000BASE-T Specification
  • Cable diagnostics
  • MII, GMII and RGMII MAC interface options
  • Configurable I/O voltage (3.3V, 2.5V, 1.8V)
  • Fast link drop mode
  • JTAG support

The DP83867 device is a robust, low power, fully featured Physical Layer transceiver with integrated PMD sublayers to support 10BASE-Te, 100BASE-TX and 1000BASE-T Ethernet protocols. Optimized for ESD protection, the DP83867 exceeds 8kV IEC 61000-4-2 (direct contact).

The DP83867 is designed for easy implementation of 10/100/1000Mbps Ethernet LANs. DP83867 interfaces directly to twisted pair media via an external transformer. This device interfaces directly to the MAC layer through the IEEE 802.3 Standard Media Independent Interface (MII), the IEEE 802.3 Gigabit Media Independent Interface (GMII) or Reduced GMII (RGMII). The QFP package supports MII/GMII/RGMII whereas the QFN package supports RGMII.

The DP83867 provides precision clock synchronization, including a synchronous Ethernet clock output. DP83867 has low latency and provides IEEE 1588 Start of Frame Detection.

The DP83867 consumes only 490mW (PAP) and 457mW (RGZ) under full operating power. Wake on LAN can be used to lower system power consumption.

The DP83867 device is a robust, low power, fully featured Physical Layer transceiver with integrated PMD sublayers to support 10BASE-Te, 100BASE-TX and 1000BASE-T Ethernet protocols. Optimized for ESD protection, the DP83867 exceeds 8kV IEC 61000-4-2 (direct contact).

The DP83867 is designed for easy implementation of 10/100/1000Mbps Ethernet LANs. DP83867 interfaces directly to twisted pair media via an external transformer. This device interfaces directly to the MAC layer through the IEEE 802.3 Standard Media Independent Interface (MII), the IEEE 802.3 Gigabit Media Independent Interface (GMII) or Reduced GMII (RGMII). The QFP package supports MII/GMII/RGMII whereas the QFN package supports RGMII.

The DP83867 provides precision clock synchronization, including a synchronous Ethernet clock output. DP83867 has low latency and provides IEEE 1588 Start of Frame Detection.

The DP83867 consumes only 490mW (PAP) and 457mW (RGZ) under full operating power. Wake on LAN can be used to lower system power consumption.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的裝置不同
DP83867CR 現行 採用小型 QFN 封裝的低功耗、穩健 GB 乙太網路 PHY 收發器 This product supports RGMII and operates over a commercial temperature range of 0°C to 70°C
DP83867CS 現行 具有 SGMII 的低功耗、穩健 GB 乙太網路 PHY 收發器 This product supports SGMII and operates over a commercial temperature range of 0°C to 70°C
DP83867E 現行 具有 SGMII 的廣泛溫度、穩固低延遲 GB 乙太網路 PHY 收發器 This product supports RGMII & SGMII and operates over an extended temperature range of -40°C to 105°C
DP83867IS 現行 具有 SGMII 的工業溫度、穩健 GB 乙太網路 PHY 收發器 This product supports SGMII and operates over an industrial temperature range of -40°C to 85°C

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 28
重要文件 類型 標題 格式選項 日期
* Data sheet DP83867IR/CR Robust, High Immunity 10/100/1000 Ethernet Physical Layer Transceiver datasheet (Rev. I) PDF | HTML 2025年 1月 7日
Application note DP83867E/IS/CS/IR/CR RGZ Power Consumption Data (Rev. A) PDF | HTML 2025年 7月 25日
Application note How to Configure DP8386x for Ethernet Compliance Testing (Rev. D) PDF | HTML 2025年 4月 8日
Application note Optimizing EMC Performance in Industrial Ethernet Application (Rev. A) PDF | HTML 2024年 10月 15日
Application note Basic Ethernet Interface Debug With Linux PDF | HTML 2024年 10月 11日
Application note How to Integrate Linux Driver Into Your System PDF | HTML 2024年 7月 12日
Application note DP83867 Troubleshooting Guide (Rev. C) PDF | HTML 2024年 4月 16日
Application note DP838xx Wake-on-LAN (Rev. A) PDF | HTML 2024年 3月 4日
Application note Time Domain Reflectometry with DP83867 and DP83869 PDF | HTML 2023年 6月 2日
User guide DP83867 SFP Application Interface Card PDF | HTML 2023年 3月 6日
Application note How to Pass IEEE Ethernet Compliance Tests PDF | HTML 2021年 9月 20日
Application note Ethernet PHY PCB Design Layout Checklist PDF | HTML 2021年 6月 1日
Technical article A history of industrial Ethernet protocols and their benefits PDF | HTML 2020年 7月 15日
E-book E-book: An engineer’s guide to industrial robot designs 2020年 2月 12日
Technical article Top 3 considerations for harsh industrial Ethernet PDF | HTML 2019年 11月 4日
Application note 88E1512 to DP83867 and DP83869 System Rollover 2019年 8月 30日
Application note AR8031 to DP83867 and DP83869 System Rollover 2019年 8月 30日
Technical article Overcoming Ethernet connectivity challenges on the power grid PDF | HTML 2019年 6月 27日
Application note Importance of Latency in Factory Automation (Rev. A) 2019年 2月 6日
Application note Selection and specification of crystals for Texas Instruments ethernet physical 2019年 2月 6日
Technical article Two ways to save power with low-power Ethernet PDF | HTML 2016年 11月 17日
Application note KSZ9031RN to DP83867CR/CS/E/IR/IS System Rollover 2016年 9月 12日
User guide USB-2-MDIO User's Guide 2016年 2月 19日
Application note RGMII Interface Timing Budgets 2015年 10月 28日
Application note How to Configure DP83867 Start of Frame 2015年 10月 27日
Technical article How to select the right industrial Ethernet standard: EtherCAT PDF | HTML 2015年 9月 17日
Application note DP83867IRPAP Power Consumption Data 2015年 8月 27日
Application note AN-1469 PHYTER® Design & Layout Guide (Rev. D) 2013年 4月 26日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DCA1000EVM — 用於即時數據擷取和串流的 DCA1000 評估模組

DCA1000 評估模組 (EVM) 可針對來自 TI AWR 和 IWR 雷達感測器 EVM 的雙通道和四通道低電壓差動訊號 (LVDS) 流量,提供即時數據擷取和串流功能。數據可透過 1-Gbps 乙太網路即時串流到執行 MMWAVE-Studio 工具的 PC,以進行擷取、視覺化,然後可傳送至選擇的應用,以處理數據和開發演算法。

使用指南: PDF
TI.com 無法提供
開發板

DP83867ERGZ-R-EVM — DP83867ERGZ RGMII 1000M/100M/10M 乙太網路 PHY 評估模組

The DP83867ERGZ-R-EVM supports 1000/100/10BASE and is compliant with the IEEE 802.3 standard. This reference design supports the RGMII MAC interface.

The DP83867ERGZ-R-EVM evaluation module (EVM) for the DP83867 device includes 3 on-board status LEDs and 5-V connectors with (...)

使用指南: PDF
TI.com 無法提供
開發板

DP83867IRPAP-EVM — 1000M/100M/10M 乙太網路 PHY 評估模組

DP83867IRPAP-EVM 支援 1000/100/10BASE 並符合 IEEE 802.3 標準。此參考設計支援 GMII、RGMII 和 MII MAC 介面。

DP83867IRPAP-EVM 包含四個板載狀態 LED,以及一個具有板載 LDO 穩壓器的 5-V USB 插孔。EVM 可存取 JTAG,並可從板載 25-MHz 晶體提供 125-MHz 參考時脈。支援序列管理介面 MDIO,且可用於存取 PHY 暫存器取得其他功能。4 級束帶讓您無須直接存取 PHY 暫存器即可配置系統。外部電源供應器可連接至各指定電壓軌,以進行額外系統評估。DP83867IRPAP-EVM (...)

使用指南: PDF
TI.com 無法提供
開發板

SK-AM64B — 適用於 AM64x Sitara™ 處理器的 AM64B 入門套件

AM64B 入門套件 (SK) 為低成本的獨立式測試與開發平台,其以 Sitara™ AM6442 處理器為基礎,是加快未來設計原型階段的理想選擇。此套件包含有線 (乙太網路) 和無線 (2.4GHz 和 5GHz) 連線、三個擴充接頭、多個開機選項及彈性偵錯功能。

在自訂電路板設計時,客戶傾向於重複使用 SK 設計檔案並對該設計檔案進行編輯。或者,客戶會重複使用部分常見的實作,包括 SOC、記憶體和通訊介面。由於 SK 應具備額外功能,所以客戶會針對其主機板設計需求將 SK 實作最佳化。將 SK (...)

使用指南: PDF | HTML
TI.com 無法提供
開發板

TMDS64EVM — 適用 Sitara™ 處理器的 AM64x 評估模組

TMDS64 評估模組 (EVM) 為獨立的測試與開發平台,是加快未來設計原型階段的理想選擇。  TMDS64EVM 配備了 Sitara™ AM6442 處理器及其他零組件,可讓使用者使用各種裝置介面,其中包括工業乙太網路、標準乙太網路、快捷週邊設備元件互連 (PCIe)、快速序列介面 (FSI) 及其他功能,可輕鬆建立原型。
車載顯示器使用 AM64x 序列周邊介面 (SPI) 連接埠,除了 LED 外也提供本機視覺輸出的能力。板載電流測量功能可用於監控節能應用的功耗。

在自訂電路板設計時,客戶傾向於重複使用 SK 設計檔案並對該設計檔案進行編輯。或者,客戶會重複使用部分常見的實作,包括 (...)

使用指南: PDF | HTML
TI.com 無法提供
子卡

DP8386X-ASPEED-EVM — 適用於 AST2600 載板的 DP8386X 子卡

ASPEED 乙太網路 PHY EVM 是子卡,可用於連接至 ASPEED 的 AST2600 評估板 (EVB),以展示如何在電路板管理控制器 (BMC) 系統中使用 DP83867 和 DP83869 乙太網路 PHY。EVM 包含四個 PHY,每個 PHY 可提供 10/100/1000Mbps 的資料速率。

使用指南: PDF | HTML
Third-party accessory

VANTRON-3P-AM6411 — Vantron Technology G405 2ETH 2COM 邊緣運算閘道

G405 industrial edge computing gateway is an Arm®-based high-performance solution built for industrial applications. The gateway features dual-SIM 4G connectivity, Wi-Fi, Bluetooth, and five Ethernet jacks, while supporting a virtual private network (VPN) to address diversified networking (...)

開發模組 (EVM) 的 GUI

DIEP Debug Interface for Ethernet PHYs (DIEP)

The drivers for Texas Instruments' Ethernet physical layer (PHY) transceivers support communication through the serial management interface (MDC/MDIO) to configure and read PHY registers. Linux and RTOS drivers can be found on our github.

 

支援產品和硬體

支援產品和硬體

支援軟體

USB-2-MDIO USB-2-MDIO Tool v1.0

The USB-2-MDIO software tool lets Texas Instruments' Ethernet PHYs access the MDIO status and device control registers.  The USB-2-MDIO tool includes a LaunchPad™ Development kit for TI's MSP430™ MCUs that is interfaced with a lightweight GUI.  The (...)

支援產品和硬體

支援產品和硬體

模擬型號

DP83867 BSDL Model (Rev. A)

SNLM192A.ZIP (5 KB) - BSDL Model
模擬型號

DP83867 QFN BSDL Model (Rev. A)

SNLM201A.ZIP (5 KB) - BSDL Model
模擬型號

DP83867IR IBIS Model (Rev. A)

SNLM191A.ZIP (80 KB) - IBIS Model
CAD/CAE 符號

DP83867 Design Review Checklist (Rev. A)

SLVRBN1A.ZIP (1116 KB)
PCB 佈局

DP838xx Industrial Layout Checklist (Rev. A)

SNLR048A.ZIP (1833 KB)
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一,涵蓋我們的類比和電源產品組合,以及特定類比行為模型,且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前,建立完整的終端設備設計和解決方案原型,進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中,您可以搜尋 TI (...)
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
參考設計

TIDA-010262 — 具有資料線供電能力的 10BASE-T1L 四埠單對乙太網路參考設計

此參考設計展現乙太網路閘道,可做為四個配備資料線供電 (PoDL) 和 1000BASE-T 乙太網路埠的 10BASE-T1L 單對乙太網路 (SPE) 埠間的橋接器使用。四個 SPE 埠可用作電源設備 (PSE),爲實地裝置提供 24V 電壓。閘道由 AM6442 微處理器控制,並使用 Linux® 作業系統,其可以是靈活且可擴展的開放原始碼軟體。
Design guide: PDF
參考設計

TIDA-00204 — 符合 EMI/EMC 規範的工業溫度雙連接埠 Gigabit 乙太網路 PHY 參考設計

此設計允許對具有整合式乙太網路 MAC 和交換器的兩種工業級 DP83867IR Gigabit 乙太網路 PHY 和 Sitara™ 主機處理器進行性能評估。本產品的開發符合 EMI 及 EMC 的工業要求。應用韌體為 PHY、UDP 和 TCP/IP 堆疊以及 HTTP Web 伺服器範例實作了驅動程式。主機處理器配置為從板載 SD 卡啟動預先安裝的韌體。USB 虛擬 COM 連接埠提供對 PHY 暫存器的可選存取。JTAG 介面允許自行開發韌體。
使用指南: PDF
電路圖: PDF
參考設計

TIDA-010010 — 工業 GB 乙太網路 PHY 參考設計

PLC 應用需要高速 gigabit 乙太網路介面。這可透過我們的參考設計實現,此參考設計將 DP83867IR 工業 gigabit 乙太網路實體層收發器實作至 Sitara™ AM5728 處理器內的 gigabit 乙太網路 MAC 週邊區塊。
Design guide: PDF
電路圖: PDF
參考設計

TIDA-010083 — 適用於機器視覺攝影機和視覺感測器的高密度隔離式 PoE 和 GigE 參考設計

乙太網路供電 (PoE) 提供簡單可靠的解決方案,可將電源與資料結合在單一纜線中,同時具備高資料速率與長距離傳輸。此組合讓 PoE 非常適合用於像是機器視覺攝影機和視覺感測器等小型裝置。此參考設計執行完整的 PoE 供電裝置 (PD),其中包括 1-Gb/s 實體層及採 27 x 27 mm 超精巧外型尺寸的高效率隔離式電源解決方案。
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTQFP (PAP) 64 Ultra Librarian
VQFN (RGZ) 48 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片