DAC39RF10EF
- 10.24/20.48GSPS, multi-Nyquist DAC Cores
- Maximum input data rate vs DAC resolution:
- 16-bit: 1.22GSPS complex
- 11-bit: 3.41GSPS complex
- 9-bit, Single channel, DES mode: 15.12GSPS
- 8-bit, Single channel, DES mode: 20.48GSPS
- 9-bit, Dual channel: 7.56GSPS/ch
- 8-bit, Dual channel, 10.24GSPS/ch
- Output bandwidth (–3dB): 12GHz
- Performance at fOUT = 2.997 GHz, DES2XL mode, DEM/Dither on
- Noise floor (small signal): –150dBFS/Hz
- SFDR (–0.1dBFS) : 77dBc
- IMD3 (–7dBFS each tone) : –69dBc
- Four Integrated digital up-converters (DUC)
- Interpolation: 1x, 2x, 3x, 4x, 6x, 8x, 12x ... 256x
- Complex baseband DUC for I/Q output
- Complex to real up conversion for dual channel direct RF sampling
- 64-bit frequency resolution NCOs
- Fast reconfiguration interface for fast frequency hopping
- 4-bit data with 200MHz clock
- 60 ns reconfiguration (32-bit frequency)
- Any frequency hopping with phase coherence
- JESD204C Interface
- Up to 16 Lanes at up to 12.8Gbps
- Class C-S, subclass-1 compatible
- Internal AC coupling capacitors
- SYSREF Windowing for automatic SYSREF timing calibration
The DAC39RF10EF and RFS10EF are a family of dual and single channel digital-to-analog converters (DAC) with 16-bit resolution. The devices can be used as non-interpolating or interpolating DACs for either direct RF sampling or complex baseband signal generation. The maximum input data rate is 20.48GSPS for a single channel or 10.24GSPS for two channels. The device can generate signals of up to 10, 2.73 or 1GHz signal bandwidth (8, 11, and 16-bit input resolution) at carrier frequencies exceeding 8GHz enabling direct sampling through C-band and into X-band.
The high sampling rate, output frequency range, 64-bit NCO frequency resolution and any frequency hopping with phase coherence also makes DAC39RF10EF and RFS10EF capable of arbitrary waveform generation (AWG) and direct digital synthesis (DDS).
A JESD204B and JESD204C compatible serial interface has 16 receiver pairs capable of up to 12.8Gbps. The interface is JESD204B and JESD204C subclass-1 compliant for deterministic latency and multi-device synchronization through the use of SYSREF.
您可能會感興趣的類似產品
引腳對引腳且具備與所比較裝置相同的功能
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
DAC39RF12EVM — DAC39RF12 評估模組
TRF1108-DAC39RFEVM — TRF1108-DAC39RF 評估模組
TRF1108-DAC39RFEVM 是一款評估板,用於評估 DAC39RF10 數位轉類比轉換器(DAC)與德州儀器 TRF1108 差分至單端 RF 放大器配對。評估模組(EVM)透過 USB 接頭和 FTDI USBto-SPI 匯流排轉換器提供裝置暫存器編程,並可選擇使用 SPI 透過 FMC+ 接頭從 FPGA 進行編程。
DAC39RF10 IBIS and IBIS AMI Model: IBIS Models With Hyperlynx and Keysight ADS Example Projects
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前,建立完整的終端設備設計和解決方案原型,進而縮短上市時間並降低開發成本。
在 PSpice for TI 設計與模擬工具中,您可以搜尋 TI (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| FCBGA (ACK) | 256 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點