DAC3484
- Very Low Power: 1.27 W at 1.25 GSPS, Full
Operating Conditions - Multi-DAC Synchronization
- Selectable 2x, 4x, 8x, 16x Interpolation Filter
- Stop-Band Attenuation > 90 dBc
- Flexible On-chip Complex Mixing
- Two Independent Fine Mixers with 32-Bit
NCOs - Power Saving Coarse Mixers: ± n×Fs/8
- Two Independent Fine Mixers with 32-Bit
- High Performance, Low Jitter Clock Multiplying
PLL - Digital I and Q Correction
- Gain, Phase, Offset, and Group Delay
Correction
- Gain, Phase, Offset, and Group Delay
- Digital Inverse Sinc Filter
- Flexible 16-Bit LVDS Input Data Bus
- 8 Sample Input FIFO
- Data Pattern Checker
- Parity Check
- GC5330 Compatible
- Temperature Sensor
- Differential Scalable Output: 10 mA to 30 mA
- Multiple Package Options: 88-Pin 9×9mm WQFN
and 196-Ball 12mm×12mm NFBGA (GREEN / Pb-
Free)
The DAC3484 is a very low power, high dynamic range, quad-channel, 16-bit digital-to-analog converter (DAC) with a sample rate as high as 1.25 GSPS.
The device includes features that simplify the design of complex transmit architectures: 2× to 16× digital interpolation filters with over 90dB of stop-band attenuation simplify the data interface and reconstruction filters. Independent complex mixers allow flexible carrier placement. A high-performance low jitter clock multiplier simplifies clocking of the device without significant impact on the dynamic range. The digital Quadrature Modulator Correction (QMC) enables complete IQ compensation for gain, offset, phase and group delay between channels in direct up-conversion applications.
Digital data is input to the device through a 16-bit LVDS data bus with on-chip termination. The device includes a FIFO, data pattern checker and parity test to ease the input interface. The interface also allows full synchronization of multiple devices.
The device is characterized for operation over the entire industrial temperature range of –40°C to 85°C and is available in a very-small 88-pin 9x9mm WQFN package or 196-ball 12×12mm NFBGA package.
Very low power, small size, superior crosstalk, high dynamic range and features of the DAC3484 are an ideal fit for systems with multiple transmit channels.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TSW3084EVM — 寬頻發射訊號鏈評估板和參考設計
The TSW3084EVM Evaluation Module is a circuit board that allows system designers to evaluate the combined performance of Texas Instruments' transmit signal chain with the LMK04806B low noise clock generator/jitter cleaner. For ease of use as a complete RF transmit solution the TSW3084EVM includes (...)
TSW3085EVM — 寬頻發射訊號鏈評估板和參考設計
The TSW3085 Evalutaion Module is a circuit board that allows system designers to evaluate the combined performance of Texas Instruments' transmit signal chain with the LMK04806B (formally National Semiconductor) low noise clock generator/jitter cleaner. For ease of use as a complete RF transmit (...)
SUNM-3P-SOM — 使用 DAC3484 的 Sundance 多處理器技術四通道 1.25-GHz DAC FMC 模組
DATACONVERTERPRO-SW — 高速資料轉換器 Pro GUI 安裝程式,v5.31
這款高速資料轉換器專業 GUI 是一款 PC(與 Windows® XP/7/10 相容)程式,旨在協助評估大多數 TI 高速資料轉換器 [類比轉數位轉換器 (ADC) 和數位轉類比轉換器 (DAC)] 和類比前端 (AFE) 平台。DATACONVERTERPRO-SW 旨在支援整個 TSW14xxx 系列資料擷取和模式產生卡,為時域和頻域中的資料轉換器分析提供強大且快速的解決方案,並支援單音、多音和調變訊號。此 GUI 也與 TI 模式產生 GUI 相容,可快速合成單音、多音和調變訊號。
使用者可以向 DATACONVERTERPRO-SW 提供自訂模式,以載入到 TI DAC。支援從 (...)
SLAC483 — DAC348x EVM Software GUI
SLAC507 — TSW308x EVM Software
SLLC420 — TSW3100EVM GUI v2.7
TINA-TI SPICE Models: Analog Interfacing Networks for DAC348x and Modulators
TIDA-00068 — 具有 DPD 回饋路徑的基地台收發器
The design is for a small cell base station development platform. It provides two real receive paths, two complex transmit paths, and a shared real feedback path. This design has macro basestation performance, but with small cell base station footprint. The current design handles (...)
TIDA-00072 — 寬頻數位至射頻發送解決方案
TSW308x 是寬頻數位至 RF 傳輸解決方案的設計範例,可產生 600MHz 連續 RF 頻譜。 系統示範了如何使用 DAC34x8x、TRF3705 IQ 調變器和 LMK0480x 來達成此目標。 此參考 EVM 結合模式發生器(例如 TSW1400EVM),可在 RF 下任意產生窄頻和寬頻訊號。 其中提供了產生符合標準 WCDMA 測試訊號的配置範例。
TIDA-00077 — 適用於 DAC348x 和調變器的類比介面網路
此參考設計中的類比介面電路通常用於電流來源型數位轉類比轉換器 (DAC) 和正交調變器之間。雖然 DAC348x 可作為 TI 高速 DAC 範例,但只要稍加修改,電路仍可套用至其他電流來源轉換器。預設情況下,DAC348x 和 TRF3705 類比介面會安裝在 TSW308xEVM 上。DAC348x 與 TRF3705 皆採用相同的 DC 偏壓與 AC 擺幅規格,以提供無縫的介面。介紹其他電路拓撲,以考慮其他 DC 偏壓與 AC 擺幅規格。透過計算正確的 DC 偏壓和適當的 AC 擺幅,系統設計人員可以根據其應用需求套用這些電路,以實現最佳性能。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WQFN-MR (RKD) | 88 | Ultra Librarian |
| NFBGA (ZAY) | 196 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。