產品詳細資料

CPU External MCU, External MPU Type MCU or MPU attach, Module Technology Wi-Fi Protocols Matter, Wi-Fi 2.4 GHz Operating system Android, FreeRTOS, Linux, Zephyr RTOS Certifications CE, FCC, ISED, MIC, Wi-Fi CERTIFIED Chip Throughput UDP (max) (Mbps) 65 Features 802.11ax, AP, COEX, STA Edge AI enabled No Security Secure communication, Secure firmware & software update Rating Catalog Operating temperature range (°C) -40 to 85
CPU External MCU, External MPU Type MCU or MPU attach, Module Technology Wi-Fi Protocols Matter, Wi-Fi 2.4 GHz Operating system Android, FreeRTOS, Linux, Zephyr RTOS Certifications CE, FCC, ISED, MIC, Wi-Fi CERTIFIED Chip Throughput UDP (max) (Mbps) 65 Features 802.11ax, AP, COEX, STA Edge AI enabled No Security Secure communication, Secure firmware & software update Rating Catalog Operating temperature range (°C) -40 to 85
QFM (MOZ) 65 121 mm² (11 mm × 11 mm)

Key Features

  • Wi-Fi 6 (802.11ax)
  • Bluetooth Low Energy 5.4 in CC33x1MOD
  • Companion module to any processor or MCU host capable of running a TCP/IP stack
  • Integrated 2.4GHz PA for a complete wireless system with up to +18.4dBm output power
  • Operating temperature: –40°C to +85°C
  • Application throughput up to 50Mbps
  • Regulatory Certification
    • FCC: Z64-CC33SBMOD
    • IC/ISED: 451I-CC33SBMOD
    • ETSI/CE
    • MIC (TELEC): 201-250389 (Test Grade: 01), 201-250390 (Test Grade: 00)
  • Based on CC3301 QuickTrack Qualified chipset
  • Bluetooth Controller Subsystem Qualified
Extended Features

  • Wi-Fi 6
    • 2.4GHz, 20MHz, single spatial stream
    • MAC, baseband, and RF transceiver with support for IEEE 802.11 b/g/n/ax
    • Target wake time (TWT), OFDMA, MU-MIMO (downlink), Basic Service Set Coloring, and trigger-based transmission for improved efficiency
    • Hardware-based encryption and decryption supporting WPA2 and WPA3
    • Excellent interoperability
    • Support for 4-bit SDIO or SPI host interfaces
  • Bluetooth Low Energy 5.4
    • LE Coded PHYs (long range), LE 2M PHY (high speed), and Advertising Extension
    • Host controller interface (HCI) transport with an option for UART or shared SDIO
    • Internal coexistence mechanism with Wi-Fi to share the same RF chains and antenna
  • Enhanced Security
    • Secured host interface
    • Firmware authentication
    • Anti-rollback protection
  • Multirole support (for example, concurrent STA and AP) to connect with Wi-Fi devices on different RF channels (Wi-Fi networks)
  • Optional antenna diversity or selection
  • 3-wire or 1-wire PTA for external coexistence with additional 2.4GHz radios (for example, Thread or Zigbee)
  • Clock sources

    • 40MHz XTAL fast clock (Integrated into the module)
    • Internal slow clock or external 32.768kHz slow clock
  • Small package size
    • Easy to design with 65-pin, 11mm × 11mm LGA package, 0.65mm pitch

Key Features

  • Wi-Fi 6 (802.11ax)
  • Bluetooth Low Energy 5.4 in CC33x1MOD
  • Companion module to any processor or MCU host capable of running a TCP/IP stack
  • Integrated 2.4GHz PA for a complete wireless system with up to +18.4dBm output power
  • Operating temperature: –40°C to +85°C
  • Application throughput up to 50Mbps
  • Regulatory Certification
    • FCC: Z64-CC33SBMOD
    • IC/ISED: 451I-CC33SBMOD
    • ETSI/CE
    • MIC (TELEC): 201-250389 (Test Grade: 01), 201-250390 (Test Grade: 00)
  • Based on CC3301 QuickTrack Qualified chipset
  • Bluetooth Controller Subsystem Qualified
Extended Features

  • Wi-Fi 6
    • 2.4GHz, 20MHz, single spatial stream
    • MAC, baseband, and RF transceiver with support for IEEE 802.11 b/g/n/ax
    • Target wake time (TWT), OFDMA, MU-MIMO (downlink), Basic Service Set Coloring, and trigger-based transmission for improved efficiency
    • Hardware-based encryption and decryption supporting WPA2 and WPA3
    • Excellent interoperability
    • Support for 4-bit SDIO or SPI host interfaces
  • Bluetooth Low Energy 5.4
    • LE Coded PHYs (long range), LE 2M PHY (high speed), and Advertising Extension
    • Host controller interface (HCI) transport with an option for UART or shared SDIO
    • Internal coexistence mechanism with Wi-Fi to share the same RF chains and antenna
  • Enhanced Security
    • Secured host interface
    • Firmware authentication
    • Anti-rollback protection
  • Multirole support (for example, concurrent STA and AP) to connect with Wi-Fi devices on different RF channels (Wi-Fi networks)
  • Optional antenna diversity or selection
  • 3-wire or 1-wire PTA for external coexistence with additional 2.4GHz radios (for example, Thread or Zigbee)
  • Clock sources

    • 40MHz XTAL fast clock (Integrated into the module)
    • Internal slow clock or external 32.768kHz slow clock
  • Small package size
    • Easy to design with 65-pin, 11mm × 11mm LGA package, 0.65mm pitch

The SimpleLink™ Wi-Fi CC33xx family of devices is where affordability meets reliability, enabling engineers to connect more applications with confidence. CC330xMOD devices are certified modules designed to simplify hardware design and reduce time-to-market.

  • CC3300MOD: A 2.4GHz Wi-Fi 6 companion module
  • CC3301MOD: A 2.4GHz Wi-Fi 6 and Bluetooth Low Energy 5.4 companion module

The CC330xMOD offers the latest standards from Wi-Fi and BLE while maintaining compatibility with Wi-Fi 4 (802.11 b/g/n). These CC330xMOD devices are based on the 10th-generation connectivity combo chip from Texas Instruments. As such, the CC330xMOD is based on proven technology. These modules are an excellent choice to use in cost-sensitive embedded applications with a Linux or RTOS host running TCP/IP. CC330xMOD brings the efficiency of Wi-Fi 6 to embedded device applications for the Internet of Things (IoT).

The SimpleLink™ Wi-Fi CC33xx family of devices is where affordability meets reliability, enabling engineers to connect more applications with confidence. CC330xMOD devices are certified modules designed to simplify hardware design and reduce time-to-market.

  • CC3300MOD: A 2.4GHz Wi-Fi 6 companion module
  • CC3301MOD: A 2.4GHz Wi-Fi 6 and Bluetooth Low Energy 5.4 companion module

The CC330xMOD offers the latest standards from Wi-Fi and BLE while maintaining compatibility with Wi-Fi 4 (802.11 b/g/n). These CC330xMOD devices are based on the 10th-generation connectivity combo chip from Texas Instruments. As such, the CC330xMOD is based on proven technology. These modules are an excellent choice to use in cost-sensitive embedded applications with a Linux or RTOS host running TCP/IP. CC330xMOD brings the efficiency of Wi-Fi 6 to embedded device applications for the Internet of Things (IoT).

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 4
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 CC330xMOD SimpleLink™ Wi-Fi 6 and Bluetooth® Low Energy Companion Module datasheet (Rev. A) PDF | HTML 2025/8/12
使用指南 CC33xx Hardware Integration User's Guide (Rev. B) PDF | HTML 2026/6/17
證書 Module Certification Request Form (Change in ID / Change in Multiple Listing) (Rev. A) 2026/5/29
使用指南 CC33xx WLAN Features User's Guide (Rev. B) PDF | HTML 2024/4/15

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

BP-CC3301MOD — SimpleLink™ CC3301MOD Wi-Fi 6 和 Bluetooth® 低耗能 BoosterPack™ 外掛程式模組

SimpleLink™ CC3301MOD Wi-Fi 6 與 Bluetooth® 低功耗裝置可在嵌入式應用中透過執行 Linux® 的處理器主機或執行 RTOS 的 MCU 主機,提供平價、可靠且安全的連線。CC3301MOD BoosterPack™ 外掛模組 (BP-CC3301MOD) 是一款可連接至 TI LaunchPad 開發套件或處理器電路板的測試與開發電路板,可快速進行軟體開發。

此套件可用於三種配置:

  1. MCU 和 RTOS 評估:BP-CC3301MOD + LaunchPad 搭載執行 LP-AM243 等 TCP/IP 的 MCU
  2. 處理器和 Linux (...)
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
IDE、配置、編譯器或偵錯程式

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

支援產品和硬體
應用軟體及架構

SIMPLELINK-WIFI-TOOLBOX — SimpleLink Wi-Fi Toolbox collection of tools to help development and testing of the CC33xx and CC35xxE Devices

Wi-Fi 工具箱套件提供使用主機偵錯及監控 WLAN/Bluetooth® 低功耗韌體、執行 RF 驗證測試、執行法規認證測試的預先測試,以及除錯硬體與軟體平台整合問題時所需的所有功能。

支援產品和硬體
驅動程式或資料庫

CC33XX-LINUX-MPU — CC33xx device driver source for MPUs running Linux OS.

CC33XX 裝置為單頻及雙頻 Wi-Fi 6 和藍牙低功耗 5.4 配套裝置,適用於 Linux 與 RTOS 系統。CC33XX-SOFTWARE 為一系列軟體開發原始碼,旨在協助 CC3300、CC3301、CC3350 和 CC3351 裝置的快速設定、開箱即用體驗,並加速在 Linux 或 RTOS 環境中的開發。

支援產品和硬體
驅動程式或資料庫

CC33XX-LINUX-MPU-PORTS-SW — CC33XX-LINUX-MPU Ports to LTS kernels and other HW platforms

CC33XX 裝置為單頻及雙頻 Wi-Fi 6 和藍牙低功耗 5.4 配套裝置,適用於 Linux 與 RTOS 系統。CC33XX-SOFTWARE 為一系列軟體開發原始碼,旨在協助 CC3300、CC3301、CC3350 和 CC3351 裝置的快速設定、開箱即用體驗,並加速在 Linux 或 RTOS 環境中的開發。

支援產品和硬體
驅動程式或資料庫

CC33XX-RTOS-MCU — CC33xx device driver for MCU and RTOS platforms

CC33XX 裝置為單頻及雙頻 Wi-Fi 6 和藍牙低功耗 5.4 配套裝置,適用於 Linux 與 RTOS 系統。CC33XX-SOFTWARE 為一系列軟體開發原始碼,旨在協助 CC3300、CC3301、CC3350 和 CC3351 裝置的快速設定、開箱即用體驗,並加速在 Linux 或 RTOS 環境中的開發。

支援產品和硬體
支援軟體

CC33XX-QUICKTRACK-CONTROL-TOOL — CC33XX QuickTrack 控制應用程式是用於 Wi-Fi® 認證的 Wi-Fi 自動化測試工具

CC33XX 裝置為單頻及雙頻 Wi-Fi 6 和藍牙低功耗 5.4 配套裝置,適用於 Linux 與 RTOS 系統。CC33XX-SOFTWARE 為一系列軟體開發原始碼,旨在協助 CC3300、CC3301、CC3350 和 CC3351 裝置的快速設定、開箱即用體驗,並加速在 Linux 或 RTOS 環境中的開發。

支援產品和硬體
認證

SIMPLELINK-CC33XX-REPORTS — Reports: CC33xx Regulatory Certification

您是否正在尋找 CC3XXX 認證支援?SIMPLELINK-CC3XXX-CERTIFCATION 提供相關資訊與支援,可協助 CC31XX、CC32XX 及 CC33XX 產品順利通過認證。在此頁面中,您將找到我們模組的最新認證報告以及我們為採用精簡晶片解決方案進行設計的客戶提供的評估板。

支援產品和硬體
設計工具

CC33XX-DESIGN-TOOLS — Design resources for CC33xx and CC33xxMOD Devices

Design resources for CC33xx devices including design files and design checklists
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
QFM (MOZ) 65 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片